Is the F0080 polyester braided thermoplastic hose suitable for fuel and hydraulic oil at temperatures up to +93Â°C and pressures between 110â130 bar?

Yes. The F0080 polyester braided thermoplastic hose is specified for hydraulic oil and fuels, with a working pressure range of 110â130 bar (depending on diameter) and an operating temperature range up to +93Â°C. Therefore it is suitable for use with fuel and hydraulic oil at temperatures up to +93Â°C and pressures between 110â130 bar. Note: for water and air the maximum listed temperature is +65Â°C, but for hydraulic oil and fuels the stated +93Â°C applies.

Can the F0080 polyester braided thermoplastic hose handle air and water applications up to +65Â°C and pressures of 110â130 bar?

Yes. The F0080 polyester braided thermoplastic hose is rated for working pressures between 110â130 bar (depending on diameter) and its operating temperature range is -40Â°C to +93Â°C, with explicit suitability for water and air up to +65Â°C. Therefore it can handle air and water applications up to +65Â°C at pressures in the 110â130 bar range, provided you select the correct hose diameter for the required pressure.

Does the F0080 polyester braided thermoplastic hose resist micro-perforation abrasion in industrial hydraulic systems?

The F0080 polyester braided thermoplastic hose features an outer layer described as micro-perforated polyurethane. Micro-perforation in the outer cover typically reduces resistance to micro-perforation abrasion compared with a solid, non-perforated polyurethane or thicker rubber cover. While the hoseâs polyester inner layer and polyester braid reinforcement provide good internal chemical compatibility, flexibility and pressure handling (working pressures 110â130 bar and wide temperature range), the presence of micro-perforations means the outer surface is inherently more vulnerable to fine abrasive particles, repeated contact with sharp edges, or fluid jetting that can exploit those perforations. Therefore, F0080 will offer acceptable durability in many hydraulic oil, gas, air, fuel and water-based fluid applications, but it should not be considered highly resistant to micro-perforation abrasion in harsh industrial environments where fine abrasive contaminants or cutting actions are present. For applications with significant risk of micro-perforation abrasion, a hose with a solid, thicker outer cover (non-perforated polyurethane or abrasion-resistant rubber) is recommended.

F0080 polyester braided thermoplastic hose

All products, Thermoplastic hoses/

Additional information

Material	PEE – polyester
Maximum operating temperature [°C]	93
Minimum operating temperature [°C]	-40
Vacuum resistance	check

Lightweight, flexible hose designed for hydraulic oil installations, gases, air, fuels, water-based fluids. Inner layer: polyester. Reinforcement: polyester braid. Outer layer: micro-perforated polyurethane. Working pressure: from 110 bar to 130 bar, depending on the hose diameter. Operating temperature: from -40°C to +93°C (for water and air up to +65°C).

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
MC-F0080B-05	Thermoplastic hose F0080B 3/16"	5	130	In stock	Enquiry
MC-F0080C-06	Thermoplastic hose F0080C 1/4"	6	130	In stock	Enquiry
MC-F0080D-08	Thermoplastic hose F0080D 5/16"	8	120	In stock	Enquiry
MC-F0080E-10	Thermoplastic hose F0080E 3/8"	10	120	In stock	Enquiry
MC-F0080F-13	Thermoplastic hose F0080F 1/2"	12	110	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Lightweight, flexible hose designed for hydraulic oil installations, gases, air, fuels, water-based fluids. Inner layer: polyester. Reinforcement: polyester braid. Outer layer: micro-perforated polyurethane. Working pressure: from 110 bar to 130 bar, depending on the hose diameter. Operating temperature: from -40°C to +93°C (for water and air up to +65°C).