Is the OL5 polyester braided thermoplastic hose available in a micro-perforated version for gas and air applications?

Yes. The OL5 polyester braided thermoplastic hose is available on request in a micro-perforated version suitable for gas and air applications. The hose has a polyester inner layer, polyester braid reinforcement, and a polyurethane outer layer. Note the operating temperature range (-40Â°C to +100Â°C; for water and air up to +70Â°C) and working pressure (80â200 bar depending on diameter) when selecting the micro-perforated option.

Can the OL5 polyester braided thermoplastic hose handle hydraulic oil, fuels, and water-based fluids across its full temperature range?

Yes. The OL5 polyester braided thermoplastic hose is designed for hydraulic oil installations, fuels and water-based fluids and its materials (polyester inner layer, polyester braid reinforcement and polyurethane outer layer) are suitable for these media across its specified operating range. Its working pressure varies by diameter (80â200 bar). Note: the maximum operating temperature is â40Â°C to +100Â°C; for water and air the upper limit is +70Â°C, so for water-based fluids ensure application temperatures do not exceed +70Â°C. Microâperforated versions are available on request for gases and air.

What is the maximum working pressure of the OL5 polyester braided thermoplastic hose for different diameters?

The OL5 polyester braided thermoplastic hose has a working pressure that varies by diameter and ranges from 80 bar to 200 bar. Specific maximum working pressures depend on the hose bore: smaller diameters achieve the higher end (up to 200 bar), while larger diameters are rated toward the lower end (around 80 bar). Exact pressure ratings for each specific diameter should be confirmed with the manufacturerâs detailed specification sheet.

OL5 polyester braided thermoplastic hose

All products, Thermoplastic hoses/

Additional information

Material	PEE – polyester
Maximum operating temperature [°C]	100
Minimum operating temperature [°C]	-40
Vacuum resistance	check

Lightweight, flexible hose designed for hydraulic oil installations, fuels, water-based fluids. Available on request in micro-perforated version (for gases and air). Inner layer: polyester. Reinforcement: polyester braid. Outer layer: polyurethane. Working pressure: from 80 bar to 200 bar, depending on hose diameter. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
ZC-OL5-03	OL5 thermoplastic hose 1/8"	4	200	In stock	Enquiry
ZC-OL5-04	Thermoplastic hose OL5 5/32" (4x8 mm)	4	200	In stock	Enquiry
ZC-OL5-04X8,6	Thermoplastic hose OL5 5/32" (4x8.6 mm)	4	210	In stock	Enquiry
ZC-OL5-05	OL5 thermoplastic hose 3/16"	5	200	In stock	Enquiry
ZC-OL5-06	OL5 thermoplastic hose 1/4"	6	145	In stock	Enquiry
ZC-OL5-08	OL5 5/16" thermoplastic hose	8	120	In stock	Enquiry
ZC-OL5-10	OL5 thermoplastic hose 3/8"	10	115	In stock	Enquiry
ZC-OL5-13	OL5 1/2" thermoplastic hose	12	80	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Lightweight, flexible hose designed for hydraulic oil installations, fuels, water-based fluids. Available on request in micro-perforated version (for gases and air). Inner layer: polyester. Reinforcement: polyester braid. Outer layer: polyurethane. Working pressure: from 80 bar to 200 bar, depending on hose diameter. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).