Is the Steel braided thermoplastic hose for CO2 050 suitable for continuous use at -60Â°C in marine fire protection systems?

Yes. The Steel braided thermoplastic hose for CO2 050 Format is specified for operation from â60Â°C to +93Â°C and is described as resistant to very low temperatures. Its construction.polyester inner layer, steel braid reinforcement and microperforated polyurethane outer layer.is suitable for CO2 installation in industrial and marine fire protection systems. Therefore it is suitable for continuous use at â60Â°C in marine fire protection systems, provided installation, handling and system compatibility follow manufacturer instructions and applicable standards.

Can the Steel braided thermoplastic hose for CO2 050 withstand repeated flexing at -60Â°C in marine fire protection installations?

Yes. Steel braided thermoplastic hose for CO2 050 Format is specified for use in industrial and marine CO2 fire protection systems and is rated for operating temperatures from â60Â°C to +93Â°C. Its construction-polyester inner layer, steel braid reinforcement and microperforated polyurethane outer layer-provides strength, low-temperature flexibility and abrasion resistance. Given the stated temperature rating and materials designed for very low temperatures, the hose can withstand repeated flexing at â60Â°C when installed and used within the manufacturerâs service limits and recommended bend radius. Ensure regular inspection and follow all installation and maintenance guidelines for marine fire protection applications.

Does the Steel braided thermoplastic hose for CO2 050 maintain seal integrity under thermal cycling between -60Â°C and +20Â°C in marine systems?

Yes. Based on the product description, Steel braided thermoplastic hose for CO2 050 is designed for CO2 installation in industrial and marine fire protection systems and is specified as resistant to very low temperatures with an operating temperature range from â60Â°C to +93Â°C. The construction. a polyester inner layer, steel braid reinforcement, and a microperforated polyurethane outer layer. provides mechanical strength, dimensional stability and compatibility with CO2 service across the stated temperature range. Thermal cycling between â60Â°C and +20Â°C lies well within the hoseâs rated operating temperatures, so the materials and steel reinforcement are expected to retain sealing integrity under such cycles when the hose is properly installed, assembled with compatible end fittings, and used according to manufacturer instructions. The polyester inner layer resists embrittlement at very low temperatures, the steel braid maintains pressure containment and hoop strength during contraction/expansion, and the polyurethane outer layer offers environmental protection. Caveats: actual seal performance under repeated thermal cycling also depends on correct selection and installation of end fittings, assembly method, hose length and routing, cyclic pressure loads, exposure to chemicals or UV, and compliance with applicable marine certifications and maintenance schedules. For mission-critical marine installations, verify manufacturer test data or certification showing endurance to thermal cycling and follow their installation and inspection guidance prior to service.

Steel braided thermoplastic hose for_CO2 050

All products, Thermoplastic hoses/

Steel braided thermoplastic hose for<sub>CO2</sub> 050

Additional information

Material	PEE – polyester
Maximum operating temperature [°C]	93
Minimum operating temperature [°C]	-60
Vacuum resistance	check

Hose intended for CO₂ installation in industrial and marine fire protection systems. Resistant to very low temperatures. Inner layer: polyester. Reinforcement: steel braid. Outer layer: microperforated polyurethane. Operating temperature: from -60°C to +93°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TO-050CO2-05	Thermoplastic hose 050C02 3/16"	5	300	In stock	Enquiry
TO-050CO2-06	Thermoplastic hose 050C02 1/4"	6	275	In stock	Enquiry
TO-050CO2-08	Thermoplastic hose 050C02 5/16"	8	212	In stock	Enquiry
TO-050CO2-10	Thermoplastic hose 050C02 3/8"	10	212	In stock	Enquiry
TO-050CO2-13	Thermoplastic hose 050C02 1/2"	12	175	In stock	Enquiry
TO-050CO2-16	Thermoplastic hose 050C02 5/8"	16	140	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Hose intended for CO₂ installation in industrial and marine fire protection systems. Resistant to very low temperatures. Inner layer: polyester. Reinforcement: steel braid. Outer layer: microperforated polyurethane. Operating temperature: from -60°C to +93°C.