TYGON® A-60-F I.B. universal heat-resistant braided food hose.

Additional information

Material

TPE – thermoplastic elastomer

Maximum operating temperature [°C]

135

Vacuum resistance

yes

Standard length [m]

15

Cream-beige flexible hose reinforced with polyester braid, odorless and tasteless, non-toxic. Resistant to temperature over a wide range from -60°C to +135°C. Flexible and elastic, resistant to deformation and abrasion. Used for pressure transfer, dispensing, and portioning of cold and hot food products, for soaps, detergents, and disinfectants, for paints and toners, pesticides, and fertilizers. The hose is an alternative to commonly used PVC or silicone hoses. It has good chemical resistance to a range of chemicals, particularly acids and bases, oxidizing agents such as hydrogen peroxide, sodium hypochlorite, or ozone. Resistant to a variety of animal and vegetable fats. Not recommended for hydrocarbons. Resistant to aging and UV radiation. Meets hygiene requirements and food contact standards – US FDA 21 CFR 177.2600, NSF-51, and 3-A. Multiple sterilization possible with steam in autoclaves, CIP and SIP cleaning of installations, ethylene oxide, or radiation methods. Full hose roll length: 15 m. Working pressure defined relative to burst pressure with a safety factor of 1:4. Material: norprene® – thermoplastic elastomer (TPE). Maximum operating temperature: up to +135°C. Brittleness temperature: -60°C. Hardness: 61° Shore (A). Density: 0.98 g/cm³. Note: Product packaged in the Clean Room of Tubes International (CLEAN ROOM) adhering to strict standards. Return of the product after opening the packaging is not possible.

List of product variants

Article numberProduct variant nameNominal inner diameterWorking pressure [bar]Enquiry
VE-APW00019Hose TYGON A-60-F I.B. 6.4x12.8 mm68.6
VE-APW00029Hose TYGON A-60-F I.B. 9.5x15.9 mm107.2
VE-APW00038Hose TYGON A-60-F I.B. 12.7x19.1 mm126.9
VE-APW00046Hose TYGON A-60-F I.B. 15.9x22.3 mm166.5
VE-APW00054Hose TYGON A-60-F I.B. 19x26.9 mm205.9
VE-APW00064Hose TYGON A-60-F I.B. 25.4x34.9 mm255.2

Cream-beige flexible hose reinforced with polyester braid, odorless and tasteless, non-toxic. Resistant to temperature over a wide range from -60°C to +135°C. Flexible and elastic, resistant to deformation and abrasion. Used for pressure transfer, dispensing, and portioning of cold and hot food products, for soaps, detergents, and disinfectants, for paints and toners, pesticides, and fertilizers. The hose is an alternative to commonly used PVC or silicone hoses. It has good chemical resistance to a range of chemicals, particularly acids and bases, oxidizing agents such as hydrogen peroxide, sodium hypochlorite, or ozone. Resistant to a variety of animal and vegetable fats. Not recommended for hydrocarbons. Resistant to aging and UV radiation. Meets hygiene requirements and food contact standards – US FDA 21 CFR 177.2600, NSF-51, and 3-A. Multiple sterilization possible with steam in autoclaves, CIP and SIP cleaning of installations, ethylene oxide, or radiation methods. Full hose roll length: 15 m. Working pressure defined relative to burst pressure with a safety factor of 1:4. Material: norprene® – thermoplastic elastomer (TPE). Maximum operating temperature: up to +135°C. Brittleness temperature: -60°C. Hardness: 61° Shore (A). Density: 0.98 g/cm³. Note: Product packaged in the Clean Room of Tubes International (CLEAN ROOM) adhering to strict standards. Return of the product after opening the packaging is not possible.

Additional information

Material

TPE – thermoplastic elastomer

Maximum operating temperature [°C]

135

Vacuum resistance

yes

Standard length [m]

15

Sales Network
Check

Inquiry
Send

Related Products

If you need help choosing a product or haven’t found the right one?