Can WEICON Screw Protection AN302-42 be removed later with standard tools without damaging M36 bolts or threads?

Yes. WEICON Screw Protection AN302-42 is a medium-strength anaerobic adhesive formulated to secure screws against loosening while still allowing later disassembly with standard tools. Key points supporting removability: - Strength level: medium (blue) . designed for serviceable joints rather than permanent locking. - Breakaway torque: 14â18 Nm for the treated screw . indicates the torque required to start turning the fastener; typical hand or standard workshop tools can apply higher torque for removal depending on joint conditions. - Disassembly: product description specifies disassembly using standard tools. - Temperature range: -60Â°C to +150Â°C . normal operating temperatures wonât irreversibly harden the compound. - Curing times: initial strength in 10â20 minutes, full strength in 3â6 hours . once cured it holds firmly but remains removable. Practical considerations: ensure you apply the recommended amount and allow proper cure time; corrosion, galling, or contaminant build-up in the joint over time can make removal harder. Using penetrating oil, correct-size sockets/wrenches, and steady, controlled torque will minimize risk of damaging M36 bolts or threads. If joints have been exposed to extreme conditions or very long service, inspect for corrosion before removal.

Can WEICON Screw Protection AN302-42 be disassembled later using common hand tools without harming M36 threads or bolts?

Yes. WEICON Screw Protection AN302-42 is a medium-strength anaerobic adhesive designed to secure screws while allowing later disassembly with common hand tools. Itâs suitable for threads up to M36 and yields a breakaway torque of 14â18 Nm, so standard wrenches/sockets can remove fasteners without damaging M36 threads or bolts when proper torque is applied. Allow full cure (3â6 h) before loading; initial handling strength occurs in 10â20 min. Operating range is â60 Â°C to +150 Â°C. As with any threadlocker, heated or seized parts, excessive overtightening, or severe corrosion can complicate removal-apply appropriate force and correct tools to avoid thread damage.

Is WEICON Screw Protection AN302-42 removable with standard tools from screws up to M36 without damage?

Yes. WEICON Screw Protection AN302-42 is designed as a medium-strength anaerobic adhesive that secures screws against loosening while allowing disassembly with standard tools. For screws up to M36 it provides reliable retention (breakaway torque ~14â18 Nm) but is removable: initial strength develops in 10â20 minutes and full strength in 3â6 hours, after which fasteners can still be undone with common hand tools without damaging the screws when proper torque and removal technique are used. Its operating temperature range (â60 Â°C to +150 Â°C) and blue color do not affect removability. Remove carefullyâapply appropriate torque, use correct bit/socket size, and if needed apply heat or penetrating agent to ease removal on longâset joints.

WEICON Screw Protection AN302-42

Adhesives and screw protections, All products/

Additional information

Anaerobic adhesive with medium viscosity for securing screws against loosening, medium strength, disassembly using standard tools. Color: blue. Maximum thread diameter: up to M36. Operating temperature range: from -60°C to +150°C. Breakaway torque for the screw: 14-18 Nm. Time to achieve initial strength: 10-20 min (depending on the material). Time to achieve full strength: after 3-6 h (depending on the material). Packaging – pen type 20 ml or 50 ml.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
WE-AN30-242-P-020	AN30242 screw sealant, medium viscosity (pen 20 ml)	-	-	In stock	0 zł		Enquiry
WE-AN30-242-P-050	AN30242 screw sealant, medium viscosity (pen 50 ml)	-	-	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Anaerobic adhesive with medium viscosity for securing screws against loosening, medium strength, disassembly using standard tools. Color: blue. Maximum thread diameter: up to M36. Operating temperature range: from -60°C to +150°C. Breakaway torque for the screw: 14-18 Nm. Time to achieve initial strength: 10-20 min (depending on the material). Time to achieve full strength: after 3-6 h (depending on the material). Packaging – pen type 20 ml or 50 ml.