Is the Welding screw, stainless steel, type VT110 suitable for 10 bar working pressure and AISI 316 pipe welding connections with metal-to-metal cone sealing?

Yes. The Welding screw, stainless steel, type VT110 is suitable for 10 bar working pressure and for welding to AISI 316 pipe connections with metal-to-metal cone sealing. The product description specifies: material AISI 316 steel, cone (metalâtoâmetal) sealing, and working pressure 10 bar. Note that the dimensions given are indicative and may vary slightly by manufacturer, so verify exact dimensions and tolerances with the supplier to ensure proper fit and welding geometry for your specific installation.

Can Welding screw, stainless steel, type VT110 withstand 10 bar working pressure with AISI 316 pipe welding and metal-to-metal cone sealing?

Yes. Welding screw, stainless steel, type VT110 can withstand 10 bar working pressure when welded to an AISI 316 pipe and using the metal-to-metal cone sealing, provided the following are met: the fitting and pipe are both AISI 316, welding is performed to appropriate industrial standards (qualified weld procedure and welder), the cone faces are free of damage and correctly machined, and installation follows manufacturer tolerances. Note that stated dimensions may vary slightly by manufacturer, so confirm specific part specs and pressure ratings from the supplier and perform pressure testing after installation.

Does Welding screw, stainless steel, type VT110 provide reliable metal-to-metal cone sealing for 10 bar AISI 316 welds?

Yes. Welding screw, stainless steel, type VT110 provides reliable metal-to-metal cone sealing for AISI 316 welds at 10 bar when properly specified and installed. The product description explicitly states metal-to-metal sealing of the screw fitting cone, material AISI 316, and a working pressure of 10 bar, which indicates it is designed for that pressure range in industrial pipe connections. Key conditions for reliable performance: - Correct material compatibility: AISI 316 construction resists corrosion and matches the listed pipe/weld materials. - Proper welding and installation: Welds must be performed to accepted procedures to ensure full fusion and dimensional accuracy; the fitting must be mounted squarely and tightened to the manufacturerâs torque guidance so the cone seats metal-to-metal. - Dimensional tolerances: The description notes dimensions may vary slightly by manufacturer; verify the specific VT110 dimensions and tolerances against your mating component to ensure a precise cone fit. - Operational factors: Ensure the application does not exceed 10 bar, and consider temperature, cyclic loading, vibration and media compatibilityâthese can affect sealing longevity. - Quality control: Use components from reputable manufacturers, inspect weld integrity and cone surfaces for defects, and perform pressure testing after installation. If these conditions are met, Welding screw, stainless steel, type VT110 is suitable for reliable metal-to-metal cone sealing at 10 bar in AISI 316 welded installations.

Union for welding-on, steel stainless, type VT110

Additional information

Material	SS – stainless steel

Union with connections for welding-on intended for use in pipe connections of industrial installations. sealing union cone (metal-metal). Material: steel AISI 316. Working pressure: 10 bar. The given dimensions are indicative and may differ slightly depending on the manufacturer.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
NM-VT110-114,3	Union for welding-on, 114.3 mm pipe, AISI 316	-	10	In stock	Enquiry
NM-VT110-13,8	Union for welding-on, 13.8 mm pipe, AISI 316	-	10	In stock	Enquiry
NM-VT110-17,0	Union for welding-on, 17.0 mm pipe, AISI 316	-	10	In stock	Enquiry
NM-VT110-21,3	Union for welding-on, 21.3 mm pipe, AISI 316	-	10	In stock	Enquiry
NM-VT110-26,9	Union for welding-on, 26.9 mm pipe, AISI 316	-	10	In stock	Enquiry
NM-VT110-33,3	Union for welding-on, 33.3 mm pipe, AISI 316	-	10	In stock	Enquiry
NM-VT110-42,4	Union for welding-on, 42.4 mm pipe, AISI 316	-	10	In stock	Enquiry
NM-VT110-48,3	Union for welding-on, 48.3 mm pipe, AISI 316	-	10	In stock	Enquiry
NM-VT110-60,3	Union for welding-on, 60.3 mm pipe, AISI 316	-	10	In stock	Enquiry
NM-VT110-88,9	Union for welding-on, 88.9 mm pipe, AISI 316	-	10	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Union with connections for welding-on intended for use in pipe connections of industrial installations. sealing union cone (metal-metal). Material: steel AISI 316. Working pressure: 10 bar. The given dimensions are indicative and may differ slightly depending on the manufacturer.