Is the Screw with GW BSP, brass, type 3460 suitable for both hot and cold water installations up to 100Â°C and 10 bar?

Yes. Screw with GW BSP, brass, type 3460 is suitable for both hot and cold water installations up to 100Â°C and 10 bar. The product description specifies it is an internal BSP threaded fitting for use in pipe connections, e.g., hot and cold water installations, made of brass, with an operating temperature range from -10Â°C to +100Â°C and a working pressure of 10 bar. Ensure installation follows applicable standards and consider water chemistry and any local regulations that might affect long-term performance.

Can Screw with GW BSP, brass, type 3460 withstand continuous use at temperatures between -10Â°C and +100Â°C?

Yes. Screw with GW BSP, brass, type 3460 is specified for use in hot and cold water pipe connections, made of brass, with an operating temperature range from -10Â°C to +100Â°C and a working pressure of 10 bar. Based on this description, it is suitable for continuous use within that temperature range when used as intended and within the stated pressure limit. Ensure installation follows manufacturer guidelines and that application conditions (media, pressure fluctuations, and exposure) do not exceed these specifications.

Does Screw with GW BSP, brass, type 3460 meet plumbing standards for potable water systems?

Screw with GW BSP, brass, type 3460 appears intended for internal BSP threaded connections in hot and cold water installations and is made of brass, with an operating temperature range of -10Â°C to +100Â°C and a working pressure of 10 bar. Na podstawie podanego opisu moÅ¼na wstÄpnie stwierdziÄ, Å¼e produkt jest przeznaczony do systemÃ³w wodociÄgowych, jednak aby jednoznacznie potwierdziÄ zgodnoÅÄ ze standardami dla wody pitnej (potable water) konieczne sÄ dodatkowe informacje i certyfikaty. Kluczowe punkty do weryfikacji: - MateriaÅ: brass (mosiÄdz) jest powszechnie uÅ¼ywany w armaturze do wody pitnej, ale waÅ¼ne sÄ specyfikacje stopu (np. zawartoÅÄ oÅowiu). W wielu jurysdykcjach dopuszczalne sÄ jedynie stopy o niskiej zawartoÅci oÅowiu zgodne z lokalnymi przepisami (np. NSF/ANSI 61, EU WRAS, KIWA). - PowÅoki i uszczelnienia: uszczelki i powÅoki muszÄ byÄ atestowane dla kontaktu z wodÄ pitnÄ. - Certyfikaty: wymagane potwierdzenia zgodnoÅci mogÄ obejmowaÄ NSF/ANSI 61 (USA), ACS (Francja), WRAS (Wielka Brytania), KIWA/NSF/EN 806 lub krajowe oceny higieniczne. Brak takich oznaczeÅ w opisie uniemoÅ¼liwia pewne stwierdzenie. - Zakres temperatur i ciÅnienia: -10Â°C do +100Â°C i 10 bar to typowe, akceptowalne parametry dla wielu instalacji wodociÄgowych, o ile materiaÅy i certyfikaty sÄ zgodne. Wniosek: Screw with GW BSP, brass, type 3460 ma parametry techniczne i przeznaczenie sugerujÄce uÅ¼ycie w instalacjach wodnych, ale nie moÅ¼na jednoznacznie potwierdziÄ, Å¼e speÅnia wymagania dla systemÃ³w wody pitnej bez informacji o stopie mosiÄdzu, zawartoÅci oÅowiu, atestach i certyfikatach higienicznych. Aby potwierdziÄ zgodnoÅÄ dla wody pitnej, poproÅ producenta o dokumentacjÄ technicznÄ i odpowiednie certyfikaty.

Screw with GW BSP, brass, type 3460

Additional information

Material	B – brass (bronze)

Internal BSP threaded fitting for use in pipe connections, e.g., hot and cold water installations. Material: brass. Operating temperature: from -10°C to +100°C. Working pressure: 10 bar.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
RV-3460-08	Fitting with G thread BSP 1/2", O-ring seal, brass	-	10	In stock	Enquiry
RV-3460-12	Fitting with G thread BSP 3/4", O-ring seal, brass	-	10	In stock	Enquiry
RV-3460-16	Fitting with G1" BSP, O-ring seal, brass	-	10	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Internal BSP threaded fitting for use in pipe connections, e.g., hot and cold water installations. Material: brass. Operating temperature: from -10°C to +100°C. Working pressure: 10 bar.