Is the T-piece "T" with GW BSP, brass, type MU suitable for air systems up to 10 bar and +100Â°C?

Yes. The T-piece "T" with GW BSP, brass, type MU Format is suitable for air systems up to 10 bar and +100Â°C. The product description explicitly states it is intended for piping connections in industrial installations (e.g., for air), is made of brass, has a working pressure of up to 10 bar and an operating temperature up to +100Â°C. Ensure proper installation, compatible seals/threads and adherence to any relevant safety standards or local regulations for your specific system.

Can the T-piece "T" with GW BSP, brass, type MU be used in industrial pneumatic piping at 10 bar and +100Â°C?

Yes. The T-piece "T" with GW BSP, brass, type MU can be used in industrial pneumatic piping at up to 10 bar and +100Â°C. The product description explicitly states suitability for piping connections of industrial installations (e.g., for air), with a working pressure up to 10 bar and an operating temperature up to +100Â°C. Ensure correct BSP thread matching, proper installation, and that system conditions (pressure surges, media compatibility, vibration, and safety margins) do not exceed these limits.

Can the T-piece "T" with GW BSP, brass, type MU handle continuous operation at 10 bar and +100Â°C in air systems?

Yes. based on the provided specification the T-piece "T" with GW BSP, brass, type MU can handle continuous operation at 10 bar and +100Â°C in air systems. The product data lists a working pressure "up to 10 bar" and an operating temperature "up to +100Â°C," which match the conditions you specified. Caveats to verify before long-term use: - Ensure the installation does not produce pressure or temperature spikes above 10 bar / +100Â°C. - Confirm compatibility of brass with your specific air composition (moisture, contaminants, chemicals) to avoid corrosion or dezincification. - Check thread sealing method and assembly torque to prevent leakage under continuous service. - If cyclic loads, vibration, or safety margins are required, consider selecting components rated above your maximum service conditions. If these checks are satisfied, the T-piece "T" with GW BSP, brass, type MU is suitable for continuous operation at 10 bar and +100Â°C in air systems.

T-piece “T” with GW BSP, brass, type MU

Additional information

Tee “T” with internal BSP thread for use in piping connections of industrial installations, e.g., for air. Material: brass. Working pressure: up to 10 bar. Operating temperature: up to +100°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
MU-1175	T-branch with 1/2" BSP female thread, brass	-	-	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Tee “T” with internal BSP thread for use in piping connections of industrial installations, e.g., for air. Material: brass. Working pressure: up to 10 bar. Operating temperature: up to +100°C.