Is the IBC connector cap for GW pallet containers, polypropylene compatible with all manufacturers' internal trapezoidal threads per DIN EN 12713 and suitable for up to 7 bar?

Yes. The IBC connector cap for GW pallet containers, polypropylene features an internal trapezoidal thread manufactured to DIN EN 12713 and is fully compatible with trapezoidal threads used by various IBC container manufacturers. It is made of polypropylene with an LDPE seal, rated for working pressures up to 7 bar, and for temperatures from â10Â°C to +70Â°C (temporarily up to +80Â°C).

Does the IBC connector cap for GW pallet containers, polypropylene fit internal trapezoidal threads per DIN EN 12713 across brands?

Yes. The IBC connector cap for GW pallet containers, polypropylene fits internal trapezoidal threads per DIN EN 12713 across brands. The product description states it has an internal trapezoidal thread compliant with DIN EN 12713 and is fully compatible with threads in IBC containers from various manufacturers. Material (polypropylene), LDPE seal, working pressure up to 7 bar and operating temperature range (-10Â°C to +70Â°C, temporarily up to +80Â°C) support safe cross-brand compatibility.

Can the IBC connector cap for GW pallet containers, polypropylene maintain a seal with LDPE gasket at temperatures up to +80Â°C?

Yes, but only temporarily and with caution. Explanation: The IBC connector cap for GW pallet containers, polypropylene is specified with an LDPE gasket and an operating temperature range of -10Â°C to +70Â°C, with a temporary allowance up to +80Â°C. LDPE softens as temperature approaches its upper limit, so at +80Â°C the gasket will still seal but may lose some elasticity and longâterm resilience. For short-term exposure to +80Â°C the seal should maintain integrity (factory rating supports this), but prolonged or repeated exposure at that temperature, combined with internal pressure, aggressive contents, or mechanical stress, increases the risk of gradual leakage or gasket deformation. Practical recommendations: - Allow use at +80Â°C only as temporary exposure per the specification. - Monitor for leaks after first exposures at high temperature. - Avoid sustained operation at +80Â°C under elevated pressure or with chemically aggressive media. - If frequent or long-term use at or above +80Â°C is required, consider a gasket material rated for higher temperatures or consult the manufacturer for validated solutions.

IBC connector cap for GW pallet containers, polypropylene

Additional information

Material	P – material (plastic)

End cap with internal trapezoidal thread compliant with DIN EN 12713 standard, fully compatible with threads in IBC containers from various manufacturers. Material: polypropylene. Seal: low-density polyethylene (LDPE). Working pressure: up to 7 bar. Operating temperature: from -10°C to +70°C (temporarily up to +80°C).

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
AC-IBF-D060	IBC connector blind cap with GW S60x6	-	-	In stock	Enquiry
AC-IBF-D060X	IBC connector blind cap with G1" S60x6	-	-	In stock	Enquiry
AC-IBF-D100	IBC connector blind plug with G1" S100x8	-	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

End cap with internal trapezoidal thread compliant with DIN EN 12713 standard, fully compatible with threads in IBC containers from various manufacturers. Material: polypropylene. Seal: low-density polyethylene (LDPE). Working pressure: up to 7 bar. Operating temperature: from -10°C to +70°C (temporarily up to +80°C).