Can the Flapper check valve with GW BSP, type 2251 be used with aggressive chemicals if the brass/bronze body corrodes over time?

Short answer: Not recommended without verification and protective measures. Explanation: The Flapper check valve with GW BSP, type 2251 is described for use with air, gases, water, chemicals and petrochemical products but its body and disc are brass (and larger sizes bronze). Brass/bronze can be attacked by many aggressive chemicals (strong acids, alkalis, ammonia, chlorides, certain solvents, and sour hydrocarbons), leading to corrosion, dezincification, embrittlement and loss of sealing. Over time this will compromise performance and safety. What to do: - Check chemical compatibility: Compare the specific chemical (concentration, temperature) against brass/bronze compatibility charts. If the fluid is listed as corrosive to copper alloys, do not use this valve. - Consider temperature and pressure: Corrosion rates typically increase with higher temperature and concentrations; the valve is rated -10Â°C to +90Â°C and âmaximum constant working pressureâ . ensure your service is within these limits. - Use protective measures: If compatibility is marginal, consider coatings, liners, or sacrificial corrosion allowance only with manufacturer approval. - Prefer alternate materials: For aggressive chemicals, select valves made of compatible materials (stainless steels with appropriate grade, duplex, Hastelloy, PTFE-lined bodies, or other corrosion-resistant alloys) and confirm by vendor chemical-resistance data. - Consult manufacturer: For borderline cases or safety-critical services, get written confirmation from the valve manufacturer about suitability and expected lifespan. Conclusion: Do not assume the Flapper check valve with GW BSP, type 2251 is suitable for aggressive chemicals solely because itâs listed for âchemicals.â Verify compatibility or choose a valve with proven resistance to your specific chemical.

Is the Flapper check valve with GW BSP, type 2251 suitable for steam service within its -10Â°C to +90Â°C operating range?

Flapper check valve with GW BSP, type 2251 is not recommended for steam service. Although its operating temperature range is -10Â°C to +90Â°C, steam applications typically involve temperatures at or above 100Â°C and can cause rapid oxidation, scaling and accelerated degradation of brass/bronze and the brass disc. The description permits use for air, gases, water, chemicals and petrochemical products subject to material chemical resistance, but does not list steam. For safety and longevity choose a valve specified for steam service (higher temperature rating and steam-compatible materials/seals). If you must evaluate further, consult the manufacturer with exact steam pressure/temperature and media details.

Does the Flapper check valve with GW BSP, type 2251 require horizontal installation as marked on the body?

Yes. The Flapper check valve with GW BSP, type 2251 must be installed horizontally as marked on the body and aligned with the flow direction indicated. The product description specifies installation according to the flow direction and in a horizontal position. Ensure compatibility with the media considering the valve materials (brass/bronze body, brass disc) and within the operating temperature range (â10Â°C to +90Â°C) and maximum constant working pressure.

Valve check flap with a female BSP thread, type 2251

All products, Check valves and filters/

Additional information

Material	B – brass (bronze)

A universal valve check flap intended for installation industrial, It can be used for air, gases, water, chemicals, products petrochemical, etc., taking into account resistance chemical material valve. valve must be mounted in accordance with direction flow the medium indicated on body, in position horizontal. maximum pressure working fixed in full the scope temperatures use. Body material: brass (for 4″), bronze (5″ and 6″). butterfly valve: brass. Connection: BSP female. Operating temperature: od -10°C up to +90°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
RV-2251-013	Check valve klapowy type 2251 female/1/2" BSP female	12	16	In stock	Enquiry
RV-2251-019	Check valve klapowy type 2251 female/3/4" BSP female	20	16	In stock	Enquiry
RV-2251-025	Check valve klapowy type 2251 female/1" BSP female	25	16	In stock	Enquiry
RV-2251-032	Check valve klapowy type 2251 female/1.1/4" BSP female	32	16	In stock	Enquiry
RV-2251-038	Check valve klapowy type 2251 female/1.1/2" BSP female	38	16	In stock	Enquiry
RV-2251-050	Check valve klapowy type 2251 female/2" BSP female	50	16	In stock	Enquiry
RV-2251-065	Check valve klapowy type 2251 female/2.1/2" BSP female	65	16	In stock	Enquiry
RV-2251-075	Check valve klapowy type 2251 female/3" BSP female	75	16	In stock	Enquiry
RV-2251-100	Check valve klapowy type 2251 female/4" BSP female	100	10	In stock	Enquiry
RV-2251-125	Check valve klapowy type 2251 female/5" BSP female	125	10	In stock	Enquiry
RV-2251-150	Check valve klapowy type 2251 female/6" BSP female	150	10	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

A universal valve check flap intended for installation industrial, It can be used for air, gases, water, chemicals, products petrochemical, etc., taking into account resistance chemical material valve. valve must be mounted in accordance with direction flow the medium indicated on body, in position horizontal. maximum pressure working fixed in full the scope temperatures use. Body material: brass (for 4″), bronze (5″ and 6″). butterfly valve: brass. Connection: BSP female. Operating temperature: od -10°C up to +90°C.