Does the Plug cap for ISO-B quick-connector in PVC, type HK prevent contamination during long-term storage and transport?

Yes. The Plug cap for ISO-B quick-connector in PVC, type HK is designed to protect HANSEN ISO-B quick coupling connections from contamination that can damage components or allow impurities into the system. Made of PVC, it provides a physical barrier against dust, dirt, moisture and other contaminants during storage and transport. For long-term effectiveness, ensure correct seating on the coupling, avoid mechanical damage to the cap, and store assemblies away from prolonged UV exposure and extreme temperatures that can degrade PVC. If conditions are aggressive (chemical exposure, high heat, very long storage), consider periodic inspection or alternative materials specified for such environments.

Can the Plug cap for ISO-B quick-connector in PVC, type HK withstand chemical exposure without degrading or letting contaminants enter?

Plug cap for ISO-B quick-connector in PVC, type HK is designed to protect HANSEN ISO-B quick coupling connections from contamination and ingress of impurities. Made of PVC, it provides good general chemical resistance to oils, greases and many non-aggressive fluids, and will reliably block particulate and moisture entry under normal service conditions. However, PVC can degrade when exposed long-term to strong acids, strong bases, ketones, chlorinated solvents or certain aggressive chemicals and high temperatures; in such environments the cap may soften, crack or allow permeation. For critical or prolonged chemical exposure, verify compatibility with the specific chemicals and operating temperatures or choose a cap material rated for those fluids.

Is the Plug cap for ISO-B quick-connector in PVC, type HK reusable after exposure to dirt or moisture?

Yes. Plug cap for ISO-B quick-connector in PVC, type HK is reusable after exposure to dirt or moisture, with conditions: - PVC material is durable and non-porous, so light dirt and moisture on the cap itself do not degrade its protective function. - Before reuse, clean the cap: remove loose debris, rinse with clean water (or mild detergent if oily), and dry thoroughly to avoid transferring contaminants into the system. - Inspect for damage: if the cap shows cracks, tears, severe abrasions, deformation, or a compromised sealing surface, do not reuse. replace it. - For critical or contamination-sensitive systems, prefer new caps or follow your facilityâs contamination-control procedures. In normal industrial use, Plug cap for ISO-B quick-connector in PVC, type HK can be cleaned and reused provided it passes visual inspection and is properly dried.

Plug cap for ISO-B quick-connector in PVC, type HK

All products, Hydraulic quick couplings/

Additional information

Material	P – material (plastic)

Plug cap for HANSEN quick coupling ISO-B standard, protecting connections from contamination that may result in damage to components and the ingress of impurities into the system. Material: PVC.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
HA-PPDC1HK	Plug cap 1-HK, plastic.	-	-	In stock	Enquiry
HA-PPDC2HK	Plug cap 2-HK, plastic.	-	-	In stock	Enquiry
HA-PPDC3HK	3-HK plug blind cap, plastic.	-	-	In stock	Enquiry
HA-PPDC4HK	Plug cap 4-HKP, plastic.	-	-	In stock	Enquiry
HA-PPDC6HK	Plug cap 6-HKP, plastic.	-	-	In stock	Enquiry
HA-PPDC8HK	Plug cap 8-HKP, plastic.	-	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Plug cap for HANSEN quick coupling ISO-B standard, protecting connections from contamination that may result in damage to components and the ingress of impurities into the system. Material: PVC.