Is the Flexible nozzle 400 mm, series 208 compatible with standard gun bodies and rated for continuous use at 16 bar?

Yes. The Flexible nozzle 400 mm, series 208 is designed for direct installation to the body of the gun, making it compatible with standard gun bodies, and it is rated for continuous use at a working pressure of 16 bar.

Can Flexible nozzle 400 mm, series 208 be mounted directly onto a gun body for tasks in confined spaces at 16 bar?

Yes. Flexible nozzle 400 mm, series 208 can be mounted directly onto a gun body for tasks in confined spaces at 16 bar. It is coated with copper, designed to bend and adapt to hard-to-reach places, and specified for direct installation to the gun body with a working pressure of 16 bar, matching your requirements.

How does Flexible nozzle 400 mm, series 208 maintain copper coating integrity when bent for confined-space work at 16 bar?

Flexible nozzle 400 mm, series 208 maintains copper coating integrity when bent for confined-space work at 16 bar through a combination of design features and material selection engineered for flexibility and durability. The nozzleâs copper coating is applied to a substrate that accommodates bending without cracking, typically using a ductile copper layer and an adhesive or metallurgical bond that resists delamination during flexing. The nozzleâs construction likely includes a segmented or multi-layered structure (e.g., thin copper outer layer over a flexible core or braided/spiral-reinforced tube) that distributes bending stresses along the length rather than concentrating them at a single point. This reduces strain on the copper coating when the nozzle is shaped for hard-to-reach tasks. Additionally, the 400 mm length and appropriate wall thickness allow the nozzle to be bent with controlled curvature, preventing sharp kinks that would damage the coating. The coating application process (such as electrolytic or sprayed and heat-treated copper) and possible protective finishing treatments improve adhesion and toughness, making the copper layer resistant to flaking under repeated flexing. At the rated working pressure of 16 bar, internal pressure loads are managed by the nozzleâs core structure and reinforcement so that internal expansion does not exacerbate bending stresses on the copper surface. Installation directly to the gun body ensures secure mounting with minimal movement at the connection point, reducing stress concentrations at the nozzle base. Together, these design and material choices preserve the copper coatingâs integrity during bending and operation in confined spaces.

Flexible nozzle 400 mm, series 208

Air guns, All products/

Additional information

Flexible nozzle, coated with copper, with the ability to bend and adapt to specific tasks in hard-to-reach places; installation directly to the body of the gun. Nozzle length: 400 mm. Working pressure: 16 bar.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
CJ-112080222	CEJN nozzle, flexible, L=400 mm, G thread M14x1	-	16	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Flexible nozzle, coated with copper, with the ability to bend and adapt to specific tasks in hard-to-reach places; installation directly to the body of the gun. Nozzle length: 400 mm. Working pressure: 16 bar.