Is the Round nozzle for coolant, 1/4" system, JETON compatible with 1/16" and 1/8" hose sizes?

Yes. The Round nozzle for coolant, 1/4" system, JETON Format is compatible with 1/16" and 1/8" hose sizes because it is available in those exact sizes (1/16", 1/8", and 1/4"). Choose the nozzle size that matches your hose internal diameter to ensure a correct fit. Note the material (acetal), maximum working pressure (up to 3 bar) and maximum operating temperature (up to +65Â°C) to confirm suitability for your application.

Can the Round nozzle for coolant, 1/4" system, JETON withstand continuous use at temperatures near +65Â°C?

Yes. The Round nozzle for coolant, 1/4" system, JETON is specified with an operating temperature up to +65Â°C, so it can withstand continuous use near +65Â°C provided the application stays within that temperature limit and the working pressure (up to 3 bar) and chemical compatibility with coolant are also respected.

Does the Round nozzle for coolant, 1/4" system, JETON resist chemicals commonly used in coolant mixtures?

Round nozzle for coolant, 1/4" system, JETON is made of acetal (POM), which offers good chemical resistance to many common coolants and waterâbased cuttingâfluid mixtures. Acetal resists dilute inorganic salts, oils, glycols (commonly used in coolant carriers), and many detergents, so for typical waterâbased emulsions and soluble oils it will generally perform well at the stated operating conditions (up to 3 bar, up to +65Â°C). However, acetal has limited resistance to strong acids, strong alkalis and certain aggressive solvents (e.g., ketones, chlorinated hydrocarbons) that can cause swelling, cracking or loss of mechanical properties. Highly alkaline or highly acidic coolant additives, concentrated solvents, or unusual chemical boosters may therefore degrade the nozzle over time. Conclusion: Round nozzle for coolant, 1/4" system, JETON is compatible with most commonly used waterâbased coolants and soluble oils, but you should verify compatibility if your coolant contains strong acids, strong bases, or aggressive organic solvents. If in doubt, consult the coolant supplierâs chemical compatibility data or perform a material compatibility test with acetal.

Round nozzle for coolant, 1/4″ system, JETON

Air and water hoses, All products/

Additional information

Round nozzle for coolant hoses JETON – 1/4″ system. Available in sizes 1/16″, 1/8″, and 1/4″. Material: acetal. Working pressure: up to 3 bar. Operating temperature: up to +65°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
JT-82022	Round nozzle 1/16" (1/4" system)	-	3	In stock	Enquiry
JT-82023	Round nozzle 1/8" (1/4" system)	-	3	In stock	Enquiry
JT-82024	Round nozzle 1/4" (1/4" system)	-	3	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Round nozzle for coolant hoses JETON – 1/4″ system. Available in sizes 1/16″, 1/8″, and 1/4″. Material: acetal. Working pressure: up to 3 bar. Operating temperature: up to +65°C.