Is the LAUX 42 lever connector socket with hose end, carbon steel, KMS suitable for abrasive bulk materials like cement or grain without extra wear protection?

Short answer: No . not without additional wear protection for abrasive bulk materials. Why: The LAUX 42 lever connector socket with hose end, carbon steel, KMS Format is described as suitable for transport and unloading of bulk materials (grains, flours, feeds, granules, cement, minerals), but its standard construction uses carbon steel (galvanized) with an EPDM gasket. While galvanizing gives basic corrosion resistance, carbon steel surfaces and a standard EPDM seal are not optimized for high abrasion from materials like cement or sand. Repeated dry abrasive flow will wear the internal bore, edges, and the sealing face, reducing life and risking leakage. Recommendations: - For abrasive solids (cement, mineral sands) use additional abrasion-resistant lining (e.g., hardened steel sleeve, hardened coating, or replaceable wear rings) or choose connectors specifically rated for abrasive service (stainless or hardened alloys, ceramic or UHMW inserts). - Ensure the seal material suits the medium (EPDM may be acceptable chemically, but its abrasion resistance is limited). - Consider flow conditions (velocity, particulate size) and add protective measures: larger bore, smoother transitions, or sacrificial liners. - For occasional grain/feeds, the connector may be acceptable; for continuous abrasive use (cement/minerals) plan wear protection or a more robust material. Conclusion: The LAUX 42 can be used in applications involving bulk materials, but for abrasive media like cement or minerals you should implement extra wear protection or select a more abrasion-resistant variant.

Can the LAUX 42 lever connector socket with hose end, carbon steel, KMS be used with corrosive or chemical media without changing the EPDM seal?

No - the LAUX 42 lever connector socket with hose end, carbon steel, KMS Format should not be used with corrosive or chemical media without verifying and likely changing the EPDM seal. Description states EPDM is the standard seal and advises selecting seal material appropriately when the medium is other than water. EPDM has limited chemical compatibility (poor with many hydrocarbons, oils, strong acids, ketones and some solvents). For corrosive/chemical media choose a compatible seal (e.g., FKM/Viton, PTFE, NBR depending on the chemical) and confirm compatibility with temperature and pressure conditions before use.

Can the LAUX 42 lever connector socket with hose end, carbon steel, KMS be used for high-temperature fluids up to 120Â°C?

Yes. The LAUX 42 lever connector socket with hose end, carbon steel, KMS is specified with an operating temperature range from -50Â°C to +120Â°C, so it can be used for fluids up to 120Â°C. Two important considerations: - Seal material: the standard gasket is EPDM, which is generally suitable up to around 120Â°C but may have limits with certain aggressive fluids. If your fluid is not water or is chemically aggressive, verify compatibility of EPDM or choose a different seal material. - System conditions: ensure that the pressure and other service conditions remain within the product limits (max working pressure 12.5 bar for liquids, 8 bar for air) and that installation and thermal cycling wonât compromise connections. If in doubt for a specific high-temperature or chemically aggressive fluid, consult the manufacturer or provide the fluid details to confirm seal compatibility.

LAUX 42 lever connector socket with hose end, carbon steel, KMS

All products, Lever couplings/

Additional information

Material	CS – steel (cast iron)

LAUX 42 lever connector socket with “tail” for hose with wide applications, e.g.: for the transport and unloading of bulk materials (grains, flours, feeds, granules, cement, minerals), for pressure and vacuum pumps, for the construction of temporary water and air installations in construction, mining, agriculture, for irrigation systems. When selecting a connector for a medium other than water, attention should be paid to the correct selection of seal material. The standard sealing is an EPDM gasket. Material: carbon steel, galvanized. Maximum working pressure: 12.5 bar (for liquids), 8 bar (for air). Tightness under vacuum. Operating temperature: from -50°C to +120°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TF-KMS-038-040	KMS socket 38 mm for 40 mm hose, galvanized steel.	40	12.5	In stock	Enquiry
TF-KMS-048-040	KMS socket 48 mm for 40 mm hose, galvanized steel.	40	12.5	In stock	Enquiry
TF-KMS-048-050	KMS socket 48 mm for 50 mm hose, galvanized steel.	50	12.5	In stock	Enquiry
TF-KMS-076-050	KMS socket 76 mm for 50 mm hose, galvanized steel.	50	12.5	In stock	Enquiry
TF-KMS-076-065	KMS socket 76 mm for hose 65 mm, galvanized steel.	65	12.5	In stock	Enquiry
TF-KMS-076-075	KMS socket 76 mm for hose 75 mm, galvanized steel.	75	12.5	In stock	Enquiry
TF-KMS-076-080	KMS socket 76 mm for 80 mm hose, galvanized steel.	80	12.5	In stock	Enquiry
TF-KMS-102-075	KMS socket 102 mm for 75 mm hose, galvanized steel.	75	12.5	In stock	Enquiry
TF-KMS-102-080	KMS socket 102 mm for 80 mm hose, galvanized steel.	80	12.5	In stock	Enquiry
TF-KMS-102-090	KMS socket 102 mm for 90 mm hose, galvanized steel.	90	12.5	In stock	Enquiry
TF-KMS-102-100	KMS socket 102 mm for 100 mm hose, galvanized steel.	100	12.5	In stock	Enquiry
TF-KMS-133-125	KMS socket 133 mm for hose 125 mm, galvanized steel.	125	12.5	In stock	Enquiry
TF-KMS-152-150	KMS socket 152 mm for hose 150 mm, galvanized steel.	150	12.5	In stock	Enquiry
TF-KMS-204-200	KMS socket 204 mm for 200 mm hose, galvanized steel.	200	12.5	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

LAUX 42 lever connector socket with “tail” for hose with wide applications, e.g.: for the transport and unloading of bulk materials (grains, flours, feeds, granules, cement, minerals), for pressure and vacuum pumps, for the construction of temporary water and air installations in construction, mining, agriculture, for irrigation systems. When selecting a connector for a medium other than water, attention should be paid to the correct selection of seal material. The standard sealing is an EPDM gasket. Material: carbon steel, galvanized. Maximum working pressure: 12.5 bar (for liquids), 8 bar (for air). Tightness under vacuum. Operating temperature: from -50°C to +120°C.