Mini lubricator designed for direct connection to pneumatic tools, such as pneumatic wrenches, grinders, etc., for lubricating tools with an oil mist. Due to the short distance from the lubricator to the tool, a constant supply of oil is ensured. The fill level is always visible. This solution protects internal components from corrosion and reduces wear on cooperating elements. The oil mist is created by the flowing air stream. The oil dosing is factory-set and amounts to approximately 50 mm³ per 1m³ of flow. One dose lasts for about 10 hours at a flow rate of 109 l/min. Oil (index: EW-583) must be ordered separately. Maximum working pressure: 8 bar (recommended 6.2 bar). Operating temperature: from -5°C to +60°C. Material: NBR (sealing), aluminum (housing), acetal (tank).