Is the Fixed nut end with GW BSP, brass, type EW rated for continuous use at 40 bar and temperatures between -10Â°C and +90Â°C?

Yes. Fixed nut end with GW BSP, brass, type EW is rated for continuous use at 40 bar and for operating temperatures between â10Â°C and +90Â°C, according to the provided specification (working pressure: 40 bar; operating temperature: from â10Â°C to +90Â°C).

Can the Fixed nut end with GW BSP, brass, type EW withstand 40 bar pressure continuously at temperatures from -10Â°C to +90Â°C?

Yes. The Fixed nut end with GW BSP, brass, type EW is specified for a working pressure of 40 bar and an operating temperature range of -10Â°C to +90Â°C, so it is suitable for continuous service at 40 bar within that temperature range. Ensure compatibility with the fluid, installation practices, and any applicable safety factors or standards for your system; for cyclic or safety-critical applications consider additional verification or testing.

Can Fixed nut end with GW BSP, brass, type EW be used continuously at 40 bar between -10Â°C and +90Â°C?

Yes. Fixed nut end with GW BSP, brass, type EW Format specifies brass construction, internal BSP thread, a working pressure of 40 bar and an operating temperature range of â10Â°C to +90Â°C. Based on those stated specifications, it can be used continuously at 40 bar within the temperature range â10Â°C to +90Â°C. Notes and cautions: - Ensure the entire assembly (hose, seals, mating fittings) is rated for 40 bar and the same temperature range; the end fitting alone does not guarantee system safety. - Verify compatibility of brass with the conveyed medium (corrosion, galvanic effects) and with any seal materials (chemical and temperature resistance). - Consider cyclic pressures, pressure spikes, and vibration; these can require additional safety margin. - Follow relevant standards, installation instructions and applicable safety factors for continuous operation.

Fixed nut end with GW BSP, brass, type EW

All products, Low-pressure fittings and adapters/

Additional information

Material	B – brass (bronze)

End fitting with fixed nut and internal BSP thread. Material: brass. Working pressure: 40 bar. Operating temperature: from -10°C to +90°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
EW-MS-11309	1/8" BSP end fitting, 4 mm hose, brass	4	40	In stock	Enquiry
EW-MS-11310	1/8" BSP end fitting, 6 mm hose, brass	6	40	In stock	Enquiry
EW-MS-11311	1/8" BSP end fitting, 9 mm hose, brass	10	40	In stock	Enquiry
EW-MS-11312	1/4" BSP end fitting, 4 mm hose, brass	4	40	In stock	Enquiry
EW-MS-11313	1/4" BSP end fitting, 6 mm hose, brass	6	40	In stock	Enquiry
EW-MS-11314	1/4" BSP end fitting, 9 mm hose, brass	10	40	In stock	Enquiry
EW-MS-11315	1/4" BSP end fitting, 13 mm hose, brass	12	40	In stock	Enquiry
EW-MS-11316	3/8" BSP end fitting, 6 mm hose, brass	6	40	In stock	Enquiry
EW-MS-11317	3/8" BSP end, 9 mm hose, brass	10	40	In stock	Enquiry
EW-MS-11318	3/8" BSP end fitting, 13 mm hose, brass	12	40	In stock	Enquiry
EW-MS-11319	1/2" BSP end fitting, 6 mm hose, brass	6	40	In stock	Enquiry
EW-MS-11320	1/2" BSP end fitting, 9 mm hose, brass	10	40	In stock	Enquiry
EW-MS-11321	1/2" BSP end fitting, 13 mm hose, brass	12	40	In stock	Enquiry
EW-MS-11322	3/4" BSP end fitting, 9 mm hose, brass	10	40	In stock	Enquiry
EW-MS-11323	3/4" BSP end fitting, 13 mm hose, brass	12	40	In stock	Enquiry
EW-MS-11324	3/4" BSP end fitting, 19 mm hose, brass	20	40	In stock	Enquiry
EW-MS-11331	1" BSP end fitting, 19 mm hose, brass	20	40	In stock	Enquiry
EW-MS-11332	1" BSP end fitting, 25 mm hose, brass	25	40	In stock	Enquiry
EW-MS-11333	End fitting with 1" BSP, hose 32 mm, brass	32	40	In stock	Enquiry