Can Seal set for pneumatic cylinder ISO 15552 STD, TYPE A, NBR, SERIES 3 fit cylinders outside the 32â125 mm diameter range?

No. Seal set for pneumatic cylinder ISO 15552 STD, TYPE A, NBR, SERIES 3 is specified for diameters 32 Ã· 125 mm. Based on the replacement kit description (STD, TYPE A, SERIES 3, Material: NBR, Diameter: 32 Ã· 125), it is intended only for cylinders within that range and is not suitable for cylinders outside 32â125 mm. Using it on smaller or larger diameters may cause improper fit, leakage, or seal failure.

Seal set for pneumatic cylinder ISO 15552 STD, TYPE A, NBR, SERIES 3

Q: How often should Seal set for pneumatic cylinder ISO 15552 STD, TYPE A, NBR, SERIES 3 be replaced during regular use?

Replacement frequency for Seal set for pneumatic cylinder ISO 15552 STD, TYPE A, NBR, SERIES 3 depends on operating conditions, but general guidance for regular use is: - Typical interval: inspect every 6 months and consider replacement every 12â24 months. - Factors that shorten interval: high cycle rates, abrasive or contaminated air, high temperatures (above NBR limits), chemical exposure, heavy loads or frequent side loadsâunder these conditions replace closer to 6â12 months. - Factors that extend interval: clean, dry, filtered compressed air, moderate temperature, correct installation and lubricationâreplacement may be safely delayed toward 24 months or more if inspections show no wear. - Inspection cues for immediate replacement: visible wear, cuts, flattening, hardening, air leaks, reduced actuator performance, or unusual noise. For best practice, combine periodic inspections (visual and functional) with preventive replacement at 12â24 months for standard industrial applications. Adjust schedule based on observed wear and operating severity.

All products, Pneumatic actuators/

Additional information

Standard length [m]	2, 60

Replacement seal kit for actuator ISO 15552 version: STD, TYPE A, SERIES 3. Material: NBR. Diameter: 32 ÷ 125.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
MW-0090320502	Seal kit fi 32 - NBR	-	-	In stock	Enquiry
MW-0090400502	Seal kit fi 40 - NBR	-	-	In stock	Enquiry
MW-0090500502	Seal kit fi 50 - NBR	-	-	In stock	Enquiry
MW-0090630502	Seal kit fi 63 - NBR	-	-	In stock	Enquiry
MW-0090800502	Seal kit fi 80 - NBR	-	-	In stock	Enquiry
MW-0091000502	Seal kit fi 100 - NBR	-	-	In stock	Enquiry
MW-0091250502	Seal kit fi 125 - NBR	-	-	In stock	Enquiry