Can the Hose end for high-pressure gases with W24.32x1/14" thread according to DIN477, stainless steel, type TLWW170 be used with oxygen?

No. Hose end for high-pressure gases with W24.32x1/14" thread according to DIN477, stainless steel, type TLWW170 cannot be used with oxygen. Uzasadnienie: - Produkt jest opisany jako intended for nitrogen. Komponenty i zatwierdzenia projektowano pod kÄtem obojÄtnych gazÃ³w takich jak azot, nie pod tlen. - MateriaÅy: AISI 304 (fitting) i mosiÄdz (nut). MosiÄdz jest generalnie niezalecany do usÅug tlenowych bez specjalnego przygotowania (obrÃ³bka, czystoÅÄ, brak smarÃ³w i zanieczyszczeÅ), poniewaÅ¼ moÅ¼e mieÄ skÅad i powierzchniÄ sprzyjajÄce zapaleniu w obecnoÅci wysokociÅnieniowego tlenu. - Brak informacji o czystoÅci, odtÅuszczeniu, impregnacji powierzchni i certyfikatach do pracy z tlenem (oxygen-clean, oxygen-compatible). Praca z tlenem wymaga elementÃ³w certyfikowanych i przygotowanych do atmosfery tlenowej. - BezpieczeÅstwo: uÅ¼ycie niezatwierdzonego osprzÄtu z tlenem zwiÄksza ryzyko zapÅonu/poÅ¼aru i wybuchu. Zalecenie: - Nie uÅ¼ywaÄ. JeÅli potrzebujesz koÅcÃ³wki do zastosowaÅ tlenowych, wybierz komponenty wyraÅºnie oznaczone jako oxygen-clean/oxygen-compatible z odpowiednimi materiaÅami i certyfikatami.

Hose end for high-pressure gases with W24.32×1/14″ thread according to DIN477, stainless steel, type TLWW170

Q: Is the Hose end for high-pressure gases with W24.32x1/14" thread according to DIN477, stainless steel, type TLWW170 compatible with nitrogen at max operating pressure?

Yes . the Hose end for high-pressure gases with W24.32x1/14" thread according to DIN477, stainless steel, type TLWW170 is compatible with nitrogen at the stated maximum operating pressure. The product description explicitly states it is "Intended for nitrogen." Materials are AISI 304 (stainless steel) for the fitting and brass for the nut, both commonly used and suitable for dry nitrogen service at high pressures. Ensure the specified "max operating pressure" of your system does not exceed the componentâs rated pressure (verify manufacturer datasheet if available) and confirm proper installation, leak testing, and compatibility with any seals or hose materials (PTFE) used in the assembly.

All products, Technical gases hoses/

Additional information

Material	SS – stainless steel

End fitting for PTFE hoses for high-pressure gases with internal Whitworth thread W24.32×1/14″, connection according to PN-81/M-69229 (DIN477-1 no. 10). Intended for nitrogen. Material: AISI 304 steel – fitting, brass – nut.

List of product variants

Article number	Product variant name	Nominal inner diameter	Working pressure [bar]
AF-TLWW170-24-04-SS-MO	End fitting GW W24.3 DIN477, for hose 1/4", AISI 304 (brass nut)	6	-
AF-TLWW170-24-05-SS-MO	End fitting GW W24.3 DIN477, for hose 5/16", AISI 304 (brass nut)	8	-
AF-TLWW170-24-06-SS-MO	End fitting GW W24.3 DIN477, for hose 3/8", AISI 304 (brass nut)	10	-

End fitting for PTFE hoses for high-pressure gases with internal Whitworth thread W24.32×1/14″, connection according to PN-81/M-69229 (DIN477-1 no. 10). Intended for nitrogen. Material: AISI 304 steel – fitting, brass – nut.