Can the Quick-connect plug with NPT socket, polypropylene, HFC series DN 12.7 be used with corrosive chemicals and what seals are compatible?

Quick-connect plug with NPT socket, polypropylene, HFC series DN 12.7 can be used with many chemicals but has limitations. Made of polypropylene with EPDM o-ring sealing, it is suitable for water, many aqueous chemicals, non-freezing liquids, and applications like chemical photographic processes and battery/accumulator filling where EPDM compatibility is acceptable. Working pressure is up to 4.2 bar and operating temperature range 0Â°C to +71Â°C. However, polypropylene and EPDM are not universally resistant to all corrosive chemicals. Avoid strongly oxidizing acids, certain solvents, ketones, aromatics, and concentrated hydrocarbons that can swell, crack, or dissolve EPDM or attack polypropylene. For aggressive acids, bases, polar organic solvents, or halogenated hydrocarbons, choose materials specifically rated for those fluids. Seals: the coupling as described uses an EPDM o-ring. EPDM is compatible with hot and cold water, many glycols, alcohols (limited), diluted acids and alkalis, and some aqueous cleaning agents, but incompatible with oils, hydrocarbons, ketones, and many chlorinated solvents. If your chemical is outside EPDMâs compatibility, request alternative seal materials (e.g., FKM/Viton, FFKM, or PTFE) and verify polypropylene body compatibility with the chosen fluid. Always confirm chemical compatibility with supplier charts and, for critical or concentrated corrosives, perform testing or select couplings made from chemically resistant polymers (PVDF, PTFE) and appropriate elastomers.

Is the Quick-connect plug with NPT socket, polypropylene, HFC series DN 12.7 suitable for potable water and food-contact liquids?

Quick-connect plug with NPT socket, polypropylene, HFC series DN 12.7: Based on the description, this coupling is intended for water and various liquids and is made of polypropylene with an EPDM O-ring. Polypropylene and EPDM are commonly compatible with potable water and many food-contact applications, but the description does not explicitly state food-grade or drinking-water certification (e.g., NSF/ANSI 61, WRAS, or FDA compliance). Working pressure (â¤4.2 bar) and temperature range (0â71Â°C) are suitable for many potable-water uses, but without declared certifications you cannot assume it is approved for potable water or food-contact liquids. Recommendation: confirm manufacturerâs food-grade/drinking-water certifications before using for potable or food-contact applications.

Can the Quick-connect plug with NPT socket, polypropylene, HFC series DN 12.7 be used in low-temperature (near 0Â°C) fluid systems?

Yes. the Quick-connect plug with NPT socket, polypropylene, HFC series DN 12.7 can be used in low-temperature fluid systems near 0Â°C. The product specification lists an operating temperature range from 0Â°C to +71Â°C and designates suitability for non-freezing liquids, so use at or just above 0Â°C is within its rated limits. Notes and practical considerations: - Sealing: the EPDM O-ring is compatible with water and many chemicals at low temperatures but can become stiffer near 0Â°C; ensure proper seating during assembly. - Pressure: working pressure up to 4.2 bar applies across the stated temperature range. verify your system pressure remains below this limit at 0Â°C. - Fluids: avoid use with fluids that freeze or form ice near 0Â°C; the coupling is not rated for frozen-liquid conditions. - Mechanical: polypropylene may be slightly less impact-resistant at the lower end of the range; avoid heavy mechanical shock or bending stresses at near-freezing temperatures. If your application involves temperatures below 0Â°C, freezing fluids, or aggressive chemicals not compatible with EPDM or polypropylene, select a coupling rated for those conditions.

Quick-connect plug with NPT socket, polypropylene, HFC series DN 12.7

All products, Industrial plastic quick couplings/

Additional information

Material	P – material (plastic)

Quick-connect plug with external NPT thread, with and without shut-off valve, intended for water, chemical, pneumatic installations, etc. Compared to traditional heavy-duty couplings with balls and securing sleeve, it has a very low weight. The highly efficient valve allows for high flow rates and minimal leakage. This coupling also allows for slight rotation of the connected hose, preventing twisting and accidental disconnection of the coupling. Applications: chemical photographic processes, battery and accumulator filling installations, sprayers, pneumatic systems, and non-freezing liquids, etc. Length L [mm] – total length. Material: polypropylene. Sealing: EPDM o-ring. Working pressure: up to 4.2 bar. Operating temperature: from 0°C to +71°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
CC-HFV-18-PP	HFC plug DN12.7 with GZ 3/8" NPT, with valve, polypropylene	-	4.2	In stock	Enquiry
CC-HFV-19-PP	HFC plug DN12.7 with 1/2" NPT female thread, with valve, polypropylene	-	4.2	In stock	Enquiry
CC-HFV-20-PP	HFC plug DN12.7 with GZ 3/4" NPT, with valve, polypropylene	-	4.2	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Quick-connect plug with external NPT thread, with and without shut-off valve, intended for water, chemical, pneumatic installations, etc. Compared to traditional heavy-duty couplings with balls and securing sleeve, it has a very low weight. The highly efficient valve allows for high flow rates and minimal leakage. This coupling also allows for slight rotation of the connected hose, preventing twisting and accidental disconnection of the coupling. Applications: chemical photographic processes, battery and accumulator filling installations, sprayers, pneumatic systems, and non-freezing liquids, etc. Length L [mm] – total length. Material: polypropylene. Sealing: EPDM o-ring. Working pressure: up to 4.2 bar. Operating temperature: from 0°C to +71°C.