Is the 90Â° quick connect hose plug, without valve, acetal, PLC series DN 6.3 compatible with deionized water and safe at up to 8.3 bar and -40Â°C to +82Â°C?

Yes. The 90Â° quick connect hose plug, without valve, acetal, PLC series DN 6.3 is suitable for use with deionized water and is rated for operation up to 8.3 bar and in the temperature range â40Â°C to +82Â°C. Its body material (acetal) and NBR Oâring sealing are appropriate for typical deionized water applications within those pressure and temperature limits.

Can the 90Â° quick connect hose plug, without valve, acetal, PLC series DN 6.3 be used for leak detection systems with deionized water?

Yes - the 90Â° quick connect hose plug, without valve, acetal, PLC series DN 6.3 can be used for leak detection systems with deionized water, with these considerations: material acetal is chemically compatible with deionized water; sealing uses an NBR O-ring which is generally acceptable for shortâterm contact but may absorb/degrade faster in ultraâpure or highâtemperature DI water compared with EPDM or FFKM; working pressure up to 8.3 bar and temperature range â40Â°C to +82Â°C are suitable for typical leakâdetection setups. For longâterm use in ultraâpure or critical applications, verify NBR compatibility with your DI water purity, consider alternative Oâring materials, and validate against system chemical/purity requirements.

Does the 90Â° quick connect hose plug, without valve, acetal, PLC series DN 6.3 work with industrial washing installations using deionized water?

Yes. the 90Â° quick connect hose plug, without valve, acetal, PLC series DN 6.3 is suitable for industrial washing installations using deionized (DI) water, with some practical considerations. Why itâs suitable: - Intended use: The product description explicitly lists washing installations and deionized water filtration among its intended applications. - Material compatibility: Acetal (POM) is chemically resistant to pure deionized water and commonly used in fluid fittings. - Sealing: NBR O-ring provides a reliable seal for many aqueous applications; it performs well with DI water under normal conditions. - Pressure and temperature: Rated up to 8.3 bar and -40Â°C to +82Â°C, which covers typical pressures and temperatures encountered in industrial washing systems. Practical considerations: - NBR limitations: NBR is generally compatible with DI water but can absorb minimal amounts of water and is less resistant than EPDM or FFKM to prolonged exposure in ultra-pure or high-temperature sterilization environments. If your process requires ultra-high purity (e.g., semiconductor rinsing) or repeated aggressive sterilization, consider a plug with EPDM/FFKM sealing. - Contamination risk: For critical ultra-pure processes, ensure materials and seals meet required cleanliness/particle/leachables specifications and consider pre-cleaning or certification. - Pressure margin: Verify your systemâs peak pressures do not exceed 8.3 bar and allow a safety margin. - Mechanical fit: Confirm DN 6.3 and hose dimensions match your tubing and quick-connect counterparts. Conclusion: The 90Â° quick connect hose plug, without valve, acetal, PLC series DN 6.3 is appropriate for typical industrial washing installations using deionized water. For ultra-high-purity or high-temperature/sterilization applications, review seal material and cleanliness requirements and consider alternative O-ring materials if necessary.

90° quick connect hose plug, without valve, acetal, PLC series DN 6.3

All products, Industrial plastic quick couplings/

Additional information

Material	P – material (plastic)

Medium-sized 90° quick-connect plug without valve with hose end intended for washing installations, deionized water filtration, industrial machines, leak detection, etc. Length L [mm] – total length. Material: acetal. Sealing: NBR o-ring. Working pressure: up to 8.3 bar. Operating temperature: from -40°C to +82°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
CC-PLX-42-AC	90° PLC connector DN6.4 for 1/4" hose, without valve, acetal	6	8.3	In stock	0 zł		Enquiry
CC-PLX-43-AC	90° plug PLC DN6.4 for 3/8" hose, without valve, acetal	10	8.3	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Medium-sized 90° quick-connect plug without valve with hose end intended for washing installations, deionized water filtration, industrial machines, leak detection, etc. Length L [mm] – total length. Material: acetal. Sealing: NBR o-ring. Working pressure: up to 8.3 bar. Operating temperature: from -40°C to +82°C.