Is the Tee fitting for hose with GZ BSP plastic PP, PVDF, series 1B type EM compatible with silicone and PVC hoses reinforced to the specified wall thickness?

Yes. The Tee fitting for hose with GZ BSP plastic PP, PVDF, series 1B type EM is compatible with silicone and PVC hoses reinforced to the specified wall thickness. It is specifically designed for flexible hoses made of PVC and silicone (with the required wall reinforcement), installed by pushing the hose onto the integrated connecting sleeve and securing it with the knurled nut. The assembly supports multiple installations and tolerates short pressure spikes up to 30 bar at +20Â°C, with a normal working pressure of 10 bar. Materials: polypropylene or PVDF.

Can the Tee fitting for hose with GZ BSP plastic PP, PVDF, series 1B type EM be used in food and pharmaceutical applications?

Yes - the Tee fitting for hose with GZ BSP plastic PP, PVDF, series 1B type EM is suitable for food and pharmaceutical applications. The product description explicitly states wide use in laboratories, medicine, pharmaceutical, chemical, and food industries. Made from polypropylene or PVDF, designed for flexible PVC or silicone hoses, it provides secure push-on installation with a knurled nut clamp, supports repeated installations, and withstands short pressure spikes up to 30 bar (at +20Â°C) with a working pressure of 10 bar. Ensure the specific hose material and wall thickness, and confirm any required regulatory/food-contact certifications for your jurisdiction before final use.

How should I tighten the knurled nut on the Tee fitting for hose with GZ BSP plastic PP, PVDF, series 1B type EM to ensure a leak-free connection?

To ensure a leakâfree connection when tightening the knurled nut on the Tee fitting for hose with GZ BSP plastic PP, PVDF, series 1B type EM, follow these steps: 1. Verify compatibility: confirm the hose material (PVC, silicone) and wall thickness match the fittingâs specified sizes. Use the correct hose diameter for the integrated connecting sleeve. 2. Prepare the hose: cut the hose squarely, remove burrs, and ensure the end is clean and dry. If the hose is reinforced, compress it slightly to ease assembly. 3. Assemble: push the hose fully onto the integrated connecting sleeve until it seats against the fitting shoulder. The hose must cover the full barb length to ensure proper clamping. 4. Start the knurled nut by hand: thread the knurled nut onto the fitting by hand until it is fingerâtight and the hose remains fully seated. 5. Tighten incrementally: using an appropriate hand tool or wrench that fits the knurling, tighten the nut further in small increments (quarter turns). Do not overâtorqueâapply firm, even pressure until you feel resistance and the hose begins to compress onto the sleeve. 6. Check for correct compression: the hose should be uniformly clamped around the sleeve without visible crushing, distortion, or slipping. Multiple installations are allowed; if reusing, inspect the hose end and fitting for wear. 7. Pressure test: apply working pressure up to the designated rating (working pressure 10 bar; brief spikes up to 30 bar at +20Â°C tolerated). Inspect for leaks and retighten slightly if needed. If leaks persist, disassemble, inspect, replace damaged hose or fitting, and reassemble. 8. Best practices: avoid excessive torque or repeated overâtightening which can damage PP/PVDF threads or the hose. For critical applications (laboratory, medical, pharmaceutical, chemical, food), follow pressureâtesting protocols and replace hoses that show wear. Following these steps will help achieve a secure, leakâfree joint with the Tee fitting for hose with GZ BSP plastic PP, PVDF, series 1B type EM.

Tee fitting for a hose with a BSP male thread of PP, PVDF plastic, 1B series type EM

All products, Low-pressure fittings and adapters/

Additional information

Material	P – material (plastic)

Tee fitting for a hose with a BSP male thread 1B series type EM, is widely used in laboratories, medicine, and the pharmaceutical, chemical and food industries. Assembly is carried out by pushing the hose onto the integrated connecting sleeve, and locking is achieved by means of a knurled nut that clamps the flexible hose onto the connecting sleeve. Repeated assembly is possible. It is intended for flexible plastic hoses (PVC, silicone) reinforced with a braid, of a specified wall thickness. The fitting withstands short pressure surges up to 30 bar at a temperature of +20°C. Other sizes and diameters of ends and connectors are available. Material: polypropylene, PVDF. Working pressure: 10 bar.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
EM-1B300MG4414PP	Tee fitting (1B series), hose 6x12 mm, with 1/4" BSP male, polypropylene	6	10	In stock	Enquiry
EM-1B300MG4414PV	Tee fitting (1B series), hose 6x12 mm, with 1/4" BSP male, PVDF	6	10	In stock	Enquiry
EM-1B300MG4438PP	Tee fitting (1B series), hose 6x12 mm, with 3/8" BSP male, polypropylene	6	10	In stock	Enquiry
EM-1B300MG4438PV	Tee fitting (1B series), hose 6x12 mm, with 3/8" BSP male, PVDF	6	10	In stock	Enquiry
EM-1B300MG4514PP	Tee fitting (1B series), hose 8x14 mm, with 1/4" BSP male, polypropylene	8	10	In stock	Enquiry
EM-1B300MG4712PP	Tee fitting (1B series), hose 9x15 mm, with 1/2" BSP male, polypropylene	8	10	In stock	Enquiry
EM-1B300MG4712PV	Tee fitting (1B series), hose 9x15 mm, with 1/2" BSP male, PVDF	8	10	In stock	Enquiry
EM-1B300MG4714PP	Tee fitting (1B series), hose 9x15 mm, with 1/4" BSP male, polypropylene	8	10	In stock	Enquiry
EM-1B300MG4714PV	Tee fitting (1B series), hose 9x15 mm, with 1/4" BSP male, PVDF	8	10	In stock	Enquiry
EM-1B300MG4738PP	Tee fitting (1B series), hose 9x15 mm, with 3/8" BSP male, polypropylene	8	10	In stock	Enquiry
EM-1B300MG4738PV	Tee fitting (1B series), hose 9x15 mm, with 3/8" BSP male, PVDF	8	10	In stock	Enquiry
EM-1B300MG4938PP	Tee fitting (1B series), hose 10x16 mm, with 3/8" BSP male, polypropylene	10	10	In stock	Enquiry
EM-1B300MG4938PV	Tee fitting (1B series), hose 10x16 mm, with 3/8" BSP male, PVDF	10	10	In stock	Enquiry
EM-1B300MG5212PP	Tee fitting (1B series), hose 12x18 mm, with 1/2" BSP male, polypropylene	12	10	In stock	Enquiry
EM-1B300MG5238PP	Tee fitting (1B series), hose 12x18 mm, with 3/8" BSP male, polypropylene	12	10	In stock	Enquiry
EM-1B300MG5612PP	Tee fitting (1B series), hose 13x19 mm, with 1/2" BSP male, polypropylene	12	10	In stock	Enquiry
EM-1B300MG5612PV	Tee fitting (1B series), hose 13x19 mm, with 1/2" BSP male, PVDF	12	10	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Tee fitting for a hose with a BSP male thread 1B series type EM, is widely used in laboratories, medicine, and the pharmaceutical, chemical and food industries. Assembly is carried out by pushing the hose onto the integrated connecting sleeve, and locking is achieved by means of a knurled nut that clamps the flexible hose onto the connecting sleeve. Repeated assembly is possible. It is intended for flexible plastic hoses (PVC, silicone) reinforced with a braid, of a specified wall thickness. The fitting withstands short pressure surges up to 30 bar at a temperature of +20°C. Other sizes and diameters of ends and connectors are available. Material: polypropylene, PVDF. Working pressure: 10 bar.