Does the 90Â° hose fitting with BSP female thread (KoÅcÃ³wka 90Â° do wÄÅ¼a z GW BSP z tworzywa PP, PVDF, seria 2N typ EM) resist common laboratory chemicals?

KoÅcÃ³wka 90Â° do wÄÅ¼a z GW BSP z tworzywa PP, PVDF, seria 2N typ EM generally offers very good resistance to common laboratory chemicals, but actual compatibility depends on the specific polymer used and the chemical. Key points: - Materials: available in polypropylene (PP) and polyvinylidene fluoride (PVDF). PVDF has superior chemical resistance and temperature stability compared with PP. - Sealing: PTFE sealing ring and compatibility with PTFE, FEP, PFA tubing means excellent inertness toward most aggressive solvents, acids and bases. - Typical compatibility: PVDF fittings resist strong acids, bases, many organic solvents, and most laboratory reagents. PP is suitable for many aqueous solutions, mild acids and alkalis, but is less resistant to strong ketones, chlorinated solvents and some aromatic hydrocarbons. - Construction: designed for PTFE/FEP/PFA, glass, metal, PA, PE tubes and locks hoses mechanically without reducing cross-section, maintaining flow; working pressure up to 10 bar. - Recommendation: for aggressive chemicals (strong oxidizers, concentrated acids, chlorinated solvents, ketones), choose the PVDF version and verify with a chemical compatibility chart or supplier datasheet. For critical or long-term applications, perform compatibility testing or consult manufacturer. In summary: KoÅcÃ³wka 90Â° do wÄÅ¼a z GW BSP z tworzywa PP, PVDF, seria 2N typ EM is chemically resistant for most common lab media.prefer PVDF for the broadest resistance and confirm specific chemical compatibility before use.

Can KoÅcÃ³wka 90Â° do wÄÅ¼a z GW BSP z tworzywa PP, PVDF, seria 2N typ EM be autoclaved or sterilized without degrading material or seals?

KoÅcÃ³wka 90Â° do wÄÅ¼a z GW BSP z tworzywa PP, PVDF, seria 2N typ EM: materiaÅowo wykonana z PP lub PVDF, z uszczelnieniem z PTFE. PVDF jest chemicznie i termicznie odporne - typowo moÅ¼e byÄ sterylizowane autoklawowo (121â135 Â°C) bez znaczÄcej degradacji. PP ma niÅ¼szÄ odpornoÅÄ temperaturowÄ (zwykle do ~100â110 Â°C) i moÅ¼e ulec odksztaÅceniu w autoklawie. PTFE uszczelka wytrzymuje temperatury autoklawowe bez degradacji. Podsumowanie: wersja PVDF z PTFE uszczelkÄ powinna byÄ autoklawowalna/sterilizowalna; wersja z PP - raczej niezalecana do autoklawowania. SprawdÅº specyfikacjÄ producenta i maksymalnÄ temperaturÄ pracy przed sterylizacjÄ.

Can KoÅcÃ³wka 90Â° do wÄÅ¼a z GW BSP z tworzywa PP, PVDF, seria 2N typ EM be used with abrasive or particulate-laden fluids?

KoÅcÃ³wka 90Â° do wÄÅ¼a z GW BSP z tworzywa PP, PVDF, seria 2N typ EM. suitability for abrasive or particulate-laden fluids: Limited suitability with cautions. Details: - Materials: PP and PVDF are chemically resistant and wear better than many plastics; PVDF offers superior abrasion resistance compared to PP. - Sealing and retention: The fitting uses a PTFE sealing ring and a locking ring + nut to secure rigid hoses/tubes. This design avoids hose bore restriction, preserving flow. - Abrasion concerns: Particulates and abrasive fluids will cause wear over time on the internal surfaces (PP more susceptible than PVDF). PTFE sealing ring and any polymer surfaces can erode, potentially leading to leaks or reduced clamping effectiveness. - Particulate interaction with locking: Hard particles can damage the sealing ring or abrade tube outer surfaces where the locking ring contacts, compromising grip. - Pressure: Rated to 10 bar. abrasive wear can reduce safety margin over time; frequent inspection is required. - Recommended use: Acceptable for occasional or low-abrasion particulate service, especially if using PVDF and compatible tubing (e.g., PTFE, PFA). For continuous, high-abrasion or slurry service, choose metal fittings or specialized abrasion-resistant components (ceramic-lined, hardened metal) and consider filtration, abrasion-resistant tubing, or sacrificial inserts. - Maintenance: Inspect regularly, replace PTFE seals and worn fittings promptly, and monitor for leaks or loosening. Conclusion: KoÅcÃ³wka 90Â° do wÄÅ¼a z GW BSP z tworzywa PP, PVDF, seria 2N typ EM can be used with mildly abrasive or low-particulate fluids (prefer PVDF), but is not ideal for heavy or continuous abrasive slurries. for those, use metal or purpose-designed abrasion-resistant fittings.

Końcówka 90° do węża z GW BSP z tworzywa PP, PVDF, seria 2N typ EM

All products, Low-pressure fittings and adapters/

Additional information

Material	P – material (plastic)

90° hose fitting with BSP female thread series 2N type EM, widely used in laboratories, medicine, pharmaceutical, chemical, and food industries. Designed for rigid hoses and tubes made of PTFE, FEP, PFA fluoropolymers, glass, metal, polyamide (PA), and polyethylene (PE) tubes. Hose/tube locking in the fitting occurs via a locking ring and nut. Sealing of the connection is ensured by a PTFE ring. This solution eliminates hose cross-section reduction, which does not affect media flow. Other sizes and diameters of fittings and couplings are available. Material: polypropylene, PVDF. Working pressure: 10 bar.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
EM-2N200FG3814PP	90° fitting (series 2N) with BSP 1/4" thread, 4 mm hose, polypropylene	-	10	In stock	Enquiry
EM-2N200FG3814PV	90° fitting (series 2N) with BSP 1/4" thread, 4 mm hose, PVDF	-	10	In stock	Enquiry
EM-2N200FG3818PP	90° fitting (series 2N) with BSP 1/8" thread, 4 mm hose, polypropylene	-	10	In stock	Enquiry
EM-2N200FG4014PP	90° fitting (series 2N) with BSP 1/4" thread, 6 mm hose, polypropylene	-	10	In stock	Enquiry
EM-2N200FG4014PV	90° fitting (series 2N) with BSP 1/4" thread, 6 mm hose, PVDF	-	10	In stock	Enquiry
EM-2N200FG4038PP	90° fitting (series 2N) with BSP 3/8" thread, 6 mm hose, polypropylene	-	10	In stock	Enquiry
EM-2N200FG4312PV	90° fitting (series 2N) with BSP 1/2", hose 8 mm, PVDF	-	10	In stock	Enquiry
EM-2N200FG4338PP	90° fitting (series 2N) with BSP 3/8" thread, 8 mm hose, polypropylene	-	10	In stock	Enquiry
EM-2N200FG4512PV	90° fitting (series 2N) with BSP 1/2" thread, 10 mm hose, PVDF	-	10	In stock	Enquiry
EM-2N200FG4812PP	90° fitting (series 2N) with BSP 1/2", hose 12 mm, polypropylene	-	10	In stock	Enquiry
EM-2N200FG4812PV	90° fitting (series 2N) with BSP 1/2" thread, 12 mm hose, PVDF	-	10	In stock	Enquiry
EM-2N200FG5112PP	90° fitting (series 2N) with BSP 1/2", hose 14 mm, polypropylene	-	10	In stock	Enquiry
EM-2N200FG5112PV	90° fitting (series 2N) with BSP 1/2" thread, 14 mm hose, PVDF	-	10	In stock	Enquiry
EM-2N200FG5212PV	90° fitting (series 2N) with BSP 1/2" thread, 15 mm hose, PVDF	-	10	In stock	Enquiry
EM-2N200FG5312PP	90° fitting (series 2N) with BSP 1/2" thread, 16 mm hose, polypropylene	-	10	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

90° hose fitting with BSP female thread series 2N type EM, widely used in laboratories, medicine, pharmaceutical, chemical, and food industries. Designed for rigid hoses and tubes made of PTFE, FEP, PFA fluoropolymers, glass, metal, polyamide (PA), and polyethylene (PE) tubes. Hose/tube locking in the fitting occurs via a locking ring and nut. Sealing of the connection is ensured by a PTFE ring. This solution eliminates hose cross-section reduction, which does not affect media flow. Other sizes and diameters of fittings and couplings are available. Material: polypropylene, PVDF. Working pressure: 10 bar.