- Home
- Online products catalogue
Our products
Select options This product has multiple variants. The options may be chosen on the product page / Details"T" tee connector with a BSPT male thread type AI 13220 intended for joining copper, brass, steel, aluminum, etc. pipes as well as plastic pipes and hoses (e.g. polyamide). Range of external diameters of the joined pipes from 4 to 22 mm. The tightness of the connection is achieved by clamping the ring onto the joined pipe and simultaneously pressing the pipe with the ring into the socket by means of a nut. Standard: EN 1254-2. Material: brass.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting ORFS with BSP female thread (sealing on the thread – PTFE tape or anaerobic sealant), type GAI-B. Material: AISI 316.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCrimper hand UPJ intended for crimping textile-reinforced hoses with type EC sheet-metal ferrules. standard equipped is in two sets (po 6 segments clamping) jaws o diameter internal crimped hoses: DN 4 ÷ 8 (range diameters internal ferrules EC: 10 ÷ 17 mm), DN 8 ÷ 10 (range diameters internal ferrules EC: 16 ÷ 22 mm). Do press exists possibility purchase base o index EC-100271.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsGrease nipple 90° DIN 71412 C serving for introduction substances lubricating between cooperating surfaces in order to reduction resistances friction and processes wear. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA tee with a thread internal NPT, type 101H, intended mainly for industry chemical, petrochemical, pharmaceutical, power generation, nuclear power plants and process engineering. Material: steel AISI 316.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCover SAFE SLEEVE MSHA with dense fabric intended for protection hoses or bundles lines hydraulic and pneumatic. Excellent abrasion resistance (tested according to SFS-EN ISO 12947-3), chemically resistant and UV-resistant, low electrical conductivity. The cover protects people in the vicinity of a bursting hose. Meets the EN ISO 3457 and EN 12999 standards. product flame-retardant, approved for use in mines. The tape width attribute specifies the width of the cover in the flat state. Material: black polyester (with printing). Operating temperature: from -40°C to +120°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA metal-rubber DOWTY seal, inch, for high-pressure connections. Material: washer - steel carbon, sealing - NBR.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA profile gasket for a TW (tankwagen) coupling, type GSD (for a 4" coupling, an O-ring gasket type TWO is used). Material: NBR (NBR, perbunan). Temperature range (approximate): from -20°C to +70°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHydraulic hose for applications in mining. Layer outer antistatic, non-toxic resistant to flame. has certificate confirming meeting requirements safety in Zone at-risk explosion. standards: EN 853-2SN. Inner layer: black synthetic rubber. Reinforcement: a double steel braid. Outer layer: black synthetic rubber. Working pressure: from 90 bar to 400 bar depending on the diameter hose. Operating temperature: od -40°C up to +100°C (momentarily up to +120°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsBlack, opaque and flexible hose with fluoroelastomer (Viton), resistant na fuels, solvents, oils, chemicals, in particular at elevated temperature. used for concentrated acids, bases, alcohols, solvents chlorinated and aromatic, hot fuels and oils. is suitable for pumps peristaltic. resistant na aging, ozone, light solar and conditions atmospheric. flame-retardant. opaque black wall hose secures substances sensitive na light. used in laboratories and use general-industrial. constitutes economical alternative for hose VERSILONTM F-5500-A. length full roll hose 50 m (for diameter internal od 4 mm for 12 mm - 25 m, od 15 mm - 5 m). The given working pressure is determined relative to the bursting pressure at a safety factor of 1:5. Material: rubber fluoro (FKM). temperature use: from -20°C to +200°C (momentarily up to +300°C). temperature brittleness: -20°C. Hardness: 60° Shore (A) - for 4x6 mm, 70° Shore (A) - for 4x8 mm. Density: 1.90 g/cm³. Note: The product is packaged in the Tubes International Clean Zone (CLEAN ROOM) in compliance with rigorous standards. Return of the product after opening the package is not possible.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA light, flexible hose with a calibrated outer diameter, intended for pneumatic, hydraulic, oil, fuel, lubrication and chemical systems. especially recommended for industrial or automotive installations hot liquids (fuels, oils, agents refrigerant) or air, not containing water. Available only in black. Hose material: modified polyamide PPA. Working pressure: from 10 bar to 44 bar (depending on the diameter and wall thickness wall hose). Operating temperature: od -40°C for + 150°C (for media based on water +70°C). standard: DIN 73378, ISO 7628.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose silicone reinforced polyester intended is for systems cooling and systems heating in vehicles (water, liquids cooling, air clean or with small amount mist oil). For oils, fuels and oil mist, a version with a fluorosilicone inner layer is recommended. length standard: 1000 mm (Available also in section 2000 mm). Pressure safety factor: 3:1. The hose meets the SAE J20R1 standards. Hardness (standard version) approx. 65° Shore (A), density approx. 1.26 g/cm³. color layer outer: blue. Material: rubber silicone. Reinforcement: polyester plies. pressure working: od 0.86 bar for 8.75 bar (depending on diameter hose). Operating temperature: from -50°C to +180°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose delivery for conveying almost all aggressive substances chemical. designed specially for industry petrochemical for fuels o high concentration carbon aromatic, hot oil and solvents. Ze regard na high general resistance chemical rubber FPM can be used for aggressive chemicals, in many cases also in elevated temperatures. Layer inner with smooth black rubber fluorine FKM. Reinforcement cord synthetic. Layer outer with rubber chloroprene CR resistant na conditions atmospheric, ozone, abrasion and oils. Confirmation of resistance and application conditions requires contact with Tubes International, in particular for temperatures above 50 º C. Inner layer: black rubber FKM (FPM, Viton). Reinforcement: synthetic cord. Outer layer: black rubber CR. pressure working: 10 bar. temperature use: from -25°C to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible and smooth with small grooves inside hose with soft polyvinyl chloride (PVC), reinforced spiral with hard PVC (right-handed). intended for extraction contaminants air, smoke, discharge dusts, chips, fibres in industry textile etc. widely used in various use industrial. self-extinguishing and flame-retardant, in accordance with American class flammability UL 94 V-2. Assembly of the hose with clamps on suitable ends, pipe spigots etc.. Wall thickness measured between the spiral. Hose material: soft grey PVC. Reinforcement: rigid-PVC spiral. Operating temperature: od -10°C up to +60°C (podworking pressure depends on temperature).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, very flexible hose suction-delivery intended for conveying water, juices, drinks and other products food in temperature up to +40°C. The absence of phthalates in the hose material recommends it for conveying milk and dairy products and alcohols with a concentration up to 50% and a temperature up to +40°C. not recommended for oils and greasy substances food. Reinforcement spiral with wire steel, embedded in wall with soft PVC, ensures good resistance to vacuum and kinking hose. smooth wall inner reduces losses flow and ensures ease cleaning. transparent wall resistant to radiation UV allows on easy visual control of the flow. W use not regarding direct contact with food (in industry, construction, agriculture) It can be used: 1) for light chemicals, water, sludge and sewage, other liquids (without fat, oils and hydrocarbons); 2) for air, vacuum conveying dusts, powders, granulates and other lightly abrasive substances bulk (not greasy). In that case the abrasiveness and the possible problem of static electricity must be taken into account. as hose reinforced only spiral steel (without braid) is characterized a certain elongation under pressure, co should take into account in use, especially in temperatures above +40°C. Standards and requirements: Food industry, food contact: compliant with the European requirements 1935/2004/EC and 10/2011/EU (simulant fluids A, B, C and D1), 2023/2006/EC (GMP). Hose material: transparent PVC. Reinforcement: galvanised steel spiral. Working pressure: from 2 bar to 12 bar, depending on the diameter hose. Vacuum: 0.9 bar. Operating temperature: from -15°C to +60°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe LAM L pressure indicator, terminated with push-in connections on both sides (hose - hose), is used to signal (a green or orange signal) that the system is pressurized; when the system is vented, the sight indicator is "empty". Working pressure: 2 ÷ 10 bar. Operating temperature: from -20°C to +60°C. Medium: filtered compressed air, oiled or non-oiled.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsMedium size plug 90° quick coupling with fitting for hose intended for installations washing, filtration water deionized, machines industrial, detection leakage, itp. Length L - total length. Material: polypropylene. Sealing: O-ring EPDM. Working pressure: for 8.3 bar. Operating temperature: from 0°C to +71°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug quick coupling DN11.8 with a weld-in connection used for low and high pressure. Material: steel AISI 303/304L. Working pressure: 200 bar. Operating temperature: up to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPush-in coupling elbow for the SPEEDFIT system, used in compressed-air installations. The installation can be made using plastic or metal pipes (copper, brass, aluminum). Material: plastic plastic. pressure working: 10 bar (+23°C), 7 bar (+70°C). Operating temperature: from -20°C to +70°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA CVL lubricator cover intended for the system SKILLAR series 100-200-300-400 and series BIT.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsBall valve 1/2" of steel stainless with mechanical cover lever bails, with socket quick coupling DN 11.8 in cover with rubber EPDM. Application: for water, agents cleaning, foam. socket quick coupling allows connection many types lances and nozzles. the connection: socket quick coupling DN11.8 in cover with EPDM / BSP female. Material: steel AISI 316. A guard: rubber EPDM. pressure working: up to 60 bar. temperature use: up to +95°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA compact, two-piece medium-pressure ball valve intended for demanding general applications. It can be used for precision fittings (instrumentation) for industry chemical, petrochemical, pharmaceutical, power generation, process engineering - for liquids and for gases. Intended for in-line mounting. The valve is characterized by a large size range to ensure an adequately large flow, tightness closing (permissible leakage internal through sealing the ball 0.1 Ncm 3 /min), high durable and low torque swivel. designed for use in position completely open or completely closed. Each valve is pressure-tested with nitrogen. Certified according to ISO 15848-1:2006 (E). Material the body: steel AISI 316. Material the ball and stem: steel AISI 316. Material lever: steel AISI 304, PVC. sealing the ball: modified PTFE. sealing stem: PTFE. Operating temperature: from -42°C to +204°C. pressure working: up to 137 bar (depending od temperature). connection: NPT female.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal Two-part ball valve with full bore type 2006SC, intended for installations industrial. lock lever is available nie we all sizes. can be used for air, gases, water, water vapor, chemicals, products petrochemical, itp., taking into account chemical resistance material valve and sealing. Material the body: cast steel stainless CF8M. Material the ball: cast steel stainless CF8M. Material lever: steel AISI 304. sealing the ball: PTFE / RTFE. sealing stem: PTFE. connection: BSP female. Operating temperature: from -20°C to +200°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling push-in angled 90° adjustable with a thread external, type R34, Intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: plastic plastic. Working pressure: 12 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +60°C. sealing: NBR.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter with BSP male thread and socket WEO for use in hydraulic systems; is used to easy connection line hydraulicznego terminated wtykiem WEO. Po connection plug has freedom of movement in the socket, co zapobiega screwing lines in trakcie installation. Working pressure: 350 bar (for rozmiaru for 3/4"), 250 bar (for rozmiaru 1"). Material: case-hardened steel. Operating temperature: from -30°C to +100°C. sealing: NBR.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter one-piece for high-pressure equipment washing with connection metric M22x1.5. Material: brass. pressure working: up to 280 bar. Operating temperature: up to +160°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsNozzle with a reducer pressure; for direct installations na tube; reduces Maximum pressure below 2 bar. Compliant with the OSHA 1-13.1 standard. (European Agency for Safety and Health at Work). pressure working: 16 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsExceptionally pliable and flexible hose suction-delivery intended for conveying substances food, requiring the use of rubber free of odour and taste. Contains no phthalates or bisphenol A. Suitable for milk and dairy products, as well as wine, beer, fruit juices. not recommended for oils and greasy substances food. commonly used in road tankers for handling milk. Due to high flexibility It can be used for hose reels drum. Layer outer hose resistant to abrasion and conditions atmospheric. Standards and requirements: Food industry, food contact: 1935/2004/EC and 2023/2006/EC (GMP), D.M. 21/03/73, FDA 21 CFR 177.2600, BfR XXI kat. 2. Inner layer: white rubber natural (NR). Reinforcement: cord synthetic, steel spiral. Outer layer: blue EPDM rubber. Working pressure: 6 bar. Operating temperature: -25°C up to +80°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting 45° INTERLOCK with metric female thread, 24° cone with an O-ring, series heavy, for hose type 4SH, R13 and R15. Material: carbon steel, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsScrew-together threaded fitting type S4 with BSP male thread (flat sealing), manufactured in accordance with EN 14424, intended for rubber hoses and certain types of thermoplastic hoses with soft textile reinforcement (without wire spiral). Widely used in the fuel sector in fuel and gas distribution lines (e.g., LPG). The basic version is made entirely of brass; also available in a chrome-plated brass version (fitting and sleeve) and in a stainless steel version (fitting) with a chrome-plated brass sleeve. Material: brass (B). Working pressure: 16 bar (up to 25 bar for DN25). Operating temperature: from -20°C to +65°C (from -30°C to +70°C for LPG).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight connector for hoses. Material: brass. Working pressure: 40 bar. Operating temperature: from -10°C to +90°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnector hose RADIATOR intended for systems cooling engine in vehicles and engines type automotive (for water, liquids cooling na base glycol ethylene). Meets the requirements of the SAE J20 R4 Class D-1 standard. Available in the molds simple a connector o length 1000 mm. pressure working: od 0.6 bar for 3.7 bar, depending on diameter a connector. Operating temperature: from -40°C to +125°C. Safety factor (bursting pressure / maximum working pressure) 3:1. Material a connector: black rubber EPDM. Reinforcement: textile braid.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsChain KN for couplings TW (tankwagen). Material: steel AISI 305.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe non-freezing high-pressure SG35 water gun for industrial applications. Suitable for warm and cold water. The lever mechanism does not require the operator to use much force, which translates into comfortable and pleasant work. The outlet part is terminated with a female 1/4" BSP thread. The gun is also available with a swivel connection to the installation. Housing material: high-strength plastic. Working pressure: up to 310 bar. pressure The permissible: 350 bar. Flow rate: 45 l/min. Operating temperature: up to +160°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsShears for cutting pipes and hoses o diameter 4 ÷ 32 mm. W sale Available are blade spare pod index JG-TS32EK.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsNipple reducing with a BSPT male thread intended for use in pipe connections of industrial installations. Material: malleable cast iron. Operating temperature: up to +300°C. Working pressure: 25 bar (up to +120°C), 20 bar (up to +300°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, very flexible cover made with tape cut with tubes PE. intended is for protection cables electrical and hoses and connection ich in bundle. Resistant to acids, oils, solvents and UV radiation. Material: black polyethylene (PE). Operating temperature: from -30°C to +80°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA cover for an AKBO DN 11.8 quick coupling socket, protecting against accidental damage. Available in colors: yellow, blue or black. Material: EPDM.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA guard top for gun NiTO HEAVY DUTY. Material: perbunan (NBR).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA switch bistable 2-position VRM-300 N with short a lever for valve VME. For mounting, the VME1-000 adapter is required. color: black.



















































