Our products
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting straight ORFS with BSP male thread (elastomer gasket with a rectangular cross-section), type GE-BE. Material: carbon steel, galvanized.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight tube connector with a hose fitting type AI 13540 intended for joining copper pipes with a hose. Range of external diameters of the joined pipes from 6 to 14 mm. The tightness of the connection is achieved by clamping the ring onto the joined pipe and simultaneously pressing the pipe with the ring into the socket by means of a nut. Standard: EN 1254-2. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTubes seamless for applications pressure made in accordance with the standard EN 10216-1 for pipes made of carbon steel. With an EN 10204 3.1 material certificate. Widely used in industry in the construction of installations and pipelines. Material: steel AISI 321 (1.4541), AISI 316Ti (1.4571). Standard pipe length (one section): 6 m. Shipped in sections: 1 m or 2 m, longer sections after agreeing on transport costs.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong, flexible hose medium wall thickness, intended for discharge chips, bulk materials, granulate etc. Dla all types industry, in particular often used for discharge chips and other particles solid in industry wood, furniture, ceramic, plastics. wall medium wall thickness and dense spiral reinforcing ensures higher parameters pressure in ratio for hoses ECO 0.4, 0.6 and 0.7. very smooth inside, little compressible and flexible - also in low temperatures. O sound resistance to abrasion, resistant also on microbes and hydrolysis. Not toxic, Contains no halogen compounds or plasticisers. Resistant to oils and petrol. hose marked is an arrow indicating correct direction flow medium. The hose wall thickness is measured between the spiral. Assembly on connectors with bridge clamps (prawo-handed). Other diameters may be available on special order. hose Available is in following versions: ECO – version standard, ECO SE – version with material flame-retardant (UL94 V-2), ECO AS – version permanently antistatic (ISO 8031: R 9 Ω, TRGS 727 (6.4.2.4): R 8 Ωm, directive 2014/34/EU (ATEX): It can be used in defined zones hazard explosion po analysis risk, ECO SE AS – version antistatic and flame-retardant (Available on special order). hose ECO produced is in process production compliant with with policy sustainable growth in which uses raw materials originating with recycling pure waste with process production, energy renewable, closed circulation water and other innovation. Hose material: transparent polyether-polyurethane. Reinforcement: spiral with wire steel. Wall thickness measured between the spiral: 1.0 mm. Operating temperature: od -40°C up to +100°C (momentarily for + 125°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBolt for BANJO type DHS with a metric thread, with two holes. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTee "L", 2x BSP female thread, 1x BSPT male thread, type A13, intended for connecting pneumatic components (including hoses) to one another. A tight connection usually requires additional sealing: PTFE tape or sealant for a tapered thread, or aluminum or copper washers for a parallel thread. Material: nickel-plated brass. Working pressure: 60 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA gun NiTO ERGO COMBI for water with quick coupling NiTO 1/2" (for lance na outlet). housing with high-strength plastic, quick coupling with brass chrome-plated. has smooth adjustment flow and lock trigger. maximum pressure working: 12 bar. Maximum operating temperature: +80°C. flow: 50 l/min (5 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery light hose multilayer o layer internal with resistant to abrasion and oil polyurethane, layer intermediate and outer with blend thermoplastic and PVC. very flexible, o small radius bending, not kinking. resistant to ozone, fats, oils and light chemicals. intended for compressed air and liquids. Widely used in industry for tools pneumatic, for air for guns for spraying and painting paints based on water, sandblasting, itp. is suitable for mounting on drums. The inner layer has approval for food contact - compliant with the European requirements 1935/2004/EC and 10/2011/EU (simulant fluids A, B and C), 2023/2006/EC (GMP). Inner layer: transparent polyurethane. Intermediate layer: PVC/PU (color black). Reinforcement: a polyester braid. Outer layer: TPE / PVC (color turquoise). Working pressure at a temperature of 20°C: 20 bar. Operating temperature: from -15°C to +60°C. As the working temperature rises, the hose's working pressure value decreases.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA metal-rubber DOWTY seal, inch, for high-pressure connections. Material: washer - steel AISI 316L, sealing - Viton.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose of reinforcement spiral steel, intended for hot water mixed with fluids anti-freeze. used for systems cooling and heating, for pumps in engines and machines. has resistance to vacuum. Layer inner resistant to heat and fluids cooling. Layer outer resistant to heat and aging. blend rubber compliant with the standard DIN 73411:79. Inner layer: black EPDM rubber. Reinforcement: cord synthetic, steel spiral. Outer layer: black EPDM rubber. Working pressure: 4 bar. Operating temperature: od -40°C up to +120°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA general-purpose hydraulic hose with a reduced outer diameter and mass and increased flexibility (COMPACT type). Confirmed hose service life of 300.000 pulse cycles. standards: EN 857 1SC, ISO 11237-1. Inner layer: black, oil-resistant synthetic rubber. Reinforcement: a single steel braid. Outer layer: black, oil-resistant synthetic rubber. Working pressure: from 90 bar to 225 bar depending on the diameter hose. Operating temperature: od -40°C up to +100°C (momentarily +120°C). For water and air, the maximum working temperature is +70°C. For air above 17 bar, microperforation of the outer layer is required.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCrystalline transparent, flexible and completely biocompatible hose medical free of phthalates (DEHP). intended for use in equipment for performing dialysis, for transfusion and draining blood, infusion, chemotherapy, inhalation, procedures minimally invasive, catheters, laboratories medical. can be used for pumps peristaltic, ale service life nie is large. high transparency hose and nie wettability surface internal ensures good visualization flow and easy total emptying hose. can be joined clamps mechanical, welded thermally, ultrasound or glued. compliant with requirements ISO 10993, European Pharmacopoeia 3.1.1.2, USP Class VI and REACH. is completely nie cytotoxic, nie hemolytic and nie pyrogenic. sterilization steam in autoclaves, oxide ethylene or radiation (for 2.5 Mrad). Length of a full hose roll 15 m. available are hoses medical o other hardness np. TYGON® ND100-80 (hardness 80° Shore (A)). The given working pressure is determined relative to the bursting pressure at a safety factor of 1:5. Material: PVC (special, without DEHP). Maximum operating temperature: +74°C. temperature brittleness: -42°C. Hardness: 65° Shore (A). Density: 1.19 g/cm³. Note: The product is packaged in the Tubes International Clean Zone (CLEAN ROOM) in compliance with rigorous standards. Return of the product after opening the package is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose pneumatic with polyethylene and aluminum for use in pneumatic systems control. very good resistance chemical layer outer allows on operation in environment aggressive chemical. Reinforcement in the molds aluminum coating increases strength hose co allows on assembly long sections without additional brackets. additional its advantage is possession tak called memory shape, enabling assembly in hard reachable places. can work buried without needs use additional covers. thanks to unique design, hose is about 5 times lighter od standard hoses pneumatic. Inner layer: polyethylene. Reinforcement: aluminum. Outer layer: black polyethylene. Working pressure: from 20 bar to 28.8 bar (depending on the diameter hose). Operating temperature: od -40°C up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible, neutral biologically hose made in accordance with technology improvement peroxide hydrogen. retains properties chemical, electrical and mechanical in temperature up to +200°C. sterilization steam, oxide ethylene, radiation. meets standards FDA, BfR, USP (kl.VI), standards quality ISO 10993 (toxicity, irritation, cytotoxicity, hemolysis). Material: semi-transparent silicone. Hardness: 62° ±5° Shore (A). Density: 1.15 ±0.03 g/cm 3. Operating temperature: od -50°C up to +200°C (momentarily +230°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose delivery for conveying anhydrous ammonia in the molds liquid and gas. Layer inner with thick rubber antistatic (R≤10 6 Ω/m). Reinforcement with high-strength cord ensures high factor safety 5:1. Layer outer with rubber antistatic (R≤10 6 Ω/m) resistant na chemicals, abrasion, ozone and conditions atmospheric, micro-perforated. hose compliant with requirements standards EN ISO 5771:2008 for hoses rubber for conveying anhydrous ammonia. hose intended in particular for ammonia in processes production fertilizers nitric, agents cleaning and for syntheses many compounds chemical. can be used in other fields industry, using anhydrous ammonia, such jak refrigeration industrial (agent R717 – ammonia, used is in large installations refrigeration; hoses flexible serve primarily for filling installation), metallurgy and many other. hose can be also used for ammonia dissolved in water - water ammonia, used wide in industry m.in. in treatment plants sewage (regulator pH), for regeneration resins ion-exchange, in industry gum and plastics and for treatment water boiler. Inner layer: black rubber synthetic. Reinforcement: synthetic cord. Outer layer: black rubber synthetic, micro-perforated. pressure working: 25 bar. temperature use: from -40°C to +55°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLeak Detection Spray - Leak detector in spray. quickly and reliably allows on locating leakage and cracks in connections and installations gas and systems compressed air. Not causes corrosion, is non-flammable and friendly for leather. tested acc. to standards DIN-DVGW.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTube pliable for grease nipples with fitting threaded. Material layer internal: polyethylene.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA two-part insert of a DIN 3015 type 101 clamp, made in accordance with the DIN 3015 standard. For dimension group 0 there is one bolt hole, for dimension groups 1 ÷ 6 there are two bolt holes. As standard, it has a profiled (grooved) surface of the pipe hole. Material insert: green polypropylene. Operating temperature: from -30°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCEJN 115 quick-coupling plug with a male thread and with a valve intended for hydraulic installations at very high pressures. Used in hydraulic presses, rescue equipment, hydraulic lifts, cutters, etc. Supplied as standard with a cap to protect against contamination. Material: hardened steel, galvanized. Sealing: NBR. Flow: 6 l/min (Δp = 4 bar). Nominal diameter: 2.5 mm. Working pressure: 1000 bar (coupling connected). Burst pressure: 2600 bar. Operating temperature: from -30°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMedium size plug quick coupling with fitting for hose intended for installations washing, filtration water deionized, machines industrial, detection leakage, itp. Length L - total length. Material: acetal. Sealing: O-ring with NBR. Working pressure: for 8.3 bar. Operating temperature: from -40°C to +82°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA high-quality NiTO water quick coupling plug 1/2" with fitting for hose. Material: brass chrome-plated. Working pressure: up to 25 bar. Operating temperature: up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug coupling CAMLOCK F with a BSPT male thread or NPT made in accordance with the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer coupling, especially in the petrochemical industry. Working pressure: up to 10 bar, depending on the coupling size. Material: aluminum.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA high-quality, strong clamp with a hinged closure for heavy loads and rolled band edges, recommended for securing thick-walled, reinforced industrial hoses and pipes. The unique design provides even pressure around the entire circumference, ensuring optimal sealing. The movable bridge allows repeated installation without removing the hose. Manufactured in accordance with the RoHS Directive 2002/95/EC. Three spot welds on the band, a high-strength screw with a spacer, and securing half-rollers guarantee maximum, reliable pressure. The clamp is marked on the band with the minimum and maximum diameter and the material it is made of. The W4 version is made entirely of stainless steel and is intended for demanding applications requiring high corrosion resistance – marine applications and the food industry. Thanks to the hexagon screw head, commonly used tools such as open-end, socket and adjustable wrenches can be used. Important! Exceeding the tightening torque will bend the screw housing; installation with pneumatic tools is not recommended. The band and bridge are made of AISI 304 steel, the screw and rollers of AISI 302 steel. The maximum working pressure of up to 45 bar depends on the hose type and the clamping diameter.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket cap lever coupling PERROT. Material: steel carbon, galvanized. Working pressure: up to 10 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCap with a thread internal BSP. Material: steel AISI 316. Working pressure 10 bar. The given dimensions are indicative and may differ slightly depending on the manufacturer.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve throttle check type FPMU used in systems hydraulic as element opening free Flow rate in one direction. Flow rate throttled in direction opposite adjustable is using swivel ring. standard pressure opening 0.5 bar (available also 2.5, 5 and 10 bar). permissible direction flow: A → A1 (free), A1→ A (throttled). Material: steel galvanized (body), hardened steel (stem). sealing: NBR. Operating temperature: od -20°C up to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA compact, two-piece medium-pressure ball valve intended for demanding general applications. It can be used for precision fittings (instrumentation) for industry chemical, petrochemical, pharmaceutical, power generation, process engineering - for liquids and for gases. Intended for in-line mounting. The valve is characterized by a large size range to ensure an adequately large flow, tightness closing (permissible leakage internal through sealing the ball 0.1 Ncm 3 /min), high durable and low torque swivel. designed for use in position completely open or completely closed. Each valve is pressure-tested with nitrogen. Certified according to ISO 15848-1:2006 (E). Material the body: steel AISI 316. Material the ball and stem: steel AISI 316. Material lever: steel AISI 304, PVC. sealing the ball: modified PTFE. sealing stem: PTFE. Operating temperature: from -42°C to +204°C. pressure working: up to 137 bar (depending od temperature). connection: BSPT female.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal ball valve type 4171 intended for installations industrial. can be used for air, gases, water, chemicals, products petrochemical, itp., taking into account chemical resistance material valve and sealing. Meets the requirements of the PED 2014/68/EU directive. Working pressure dependent is od temperature use. Material the body: brass nickel-plated. Material the ball: brass chrome-plated. Material lever: steel carbon. sealing the ball: PTFE. sealing stem: NBR. connection: BSP female. Operating temperature: from -20°C to +110°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick exhaust valve type VSR L, terminated with push-in connections on both sides (hose - hose), with the exhaust discharged through the push-in connection. Working pressure: 10 bar. Operating temperature: from -20°C to +60°C. Medium: filtered compressed air, oiled or non-oiled.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFilter bowl and filter-regulator for system BIT 1/8" and 1/4". Material: plastic plastic.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA set of air-conditioning jaws for a FINN-POWER type P16 crimping press. Material: surface-hardened steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling IBC in white with a thread internal trapezoidal compliant with the DIN EN 12713 standard and with a male thread for hygienic couplings (Rd, IDF, RJT). The trapezoidal threads that the IBC couplings are fitted with as standard match 100% the threads in the IBC containers of various manufacturers. Material: polypropylene. gasket: low-density polyethylene (LDPE). Working pressure: up to 7 bar. Operating temperature: from -10°C to +70°C (momentarily up to +80°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling push-in angled 90°, type R4, Intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: brass nickel-plated. Working pressure: 16 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +80°C. sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAn adapter made of high-quality glass-fiber-reinforced polypropylene, food-safe, intended for use with the most popular and most commonly used plastic barrels used for storing raw materials (200 liters). Designed to facilitate the installation of e.g. a suction pump or a ball valve (tap). A tight connection on the DIN EN 12713 male thread is ensured by an O-ring gasket. Material: polypropylene glass-fiber-reinforced. gasket: low-density polyethylene (LDPE). Operating temperature: from -10°C to +70°C (momentarily up to +80°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter with BSP male and female thread, type A5/Z, intended for connecting pneumatic components (including hoses) to one another. A tight connection usually requires additional sealing: PTFE tape or sealant for a tapered thread, or aluminum or copper washers for a parallel thread. Material: nickel-plated brass. Working pressure: 60 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter type RDST with a metric male thread, reducing, 60° cone seal. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA cross with a thread internal NPT, type 102H, intended mainly for industry chemical, petrochemical, pharmaceutical, power generation, nuclear power plants and process engineering. Material: steel AISI 316.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNozzle SAFETYSTAR extended bent 30° for guns for air, terminated a thread metric M12x1.25. reducing level noise for 80 dB. meets the following standard Safety and the directive: OSHA 1-13.1. (European Agency for Safety and Health at Work), 2003/10/WE, 2006/42/WE, EN 12100. connection: M12x1.25 male. Material: steel nickel-plated (nozzle), POM (connection). pressure Maximum: 10 bar. Operating temperature: from -10°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose suction-delivery, intended for conveying wine, beer, juices fruit, alcohols with a concentration up to 96% and other substances food free of fats. The inner layer is free of phthalates, plasticisers and components of animal origin. Contains no phthalates or bisphenol A and no polycyclic aromatic hydrocarbons (PAH Free), in accordance with ZEK 01.4-08 Cat.1. Tested for the presence of heavy metals. thanks to external corrugation hose is exceptionally pliable and flexible. outer surface hose with material thermoplastic o properties slippery fabric has very low factor friction, co additional facilitates operating a hose and eliminates friction o other hoses and element equipment. recommended way mounting with fitting are special clamp shell EASY SHELL, o shape adapted for serrated hose. standards and requirements : industry food, contact with food 1935/2004/EC and 2023/2006/EC (GMP). Layer inner compliant with FDA 21 CFR 177.2600, BfR XXI kat. 2, D.M. 21/03/73. Inner layer: white, smooth rubber butyl (IIR). Reinforcement: cord synthetic, steel spiral. Outer layer: red synthetic rubber with coating thermoplastic. Working pressure: 10 bar. Vacuum: 0.6 bar. Operating temperature: from -40°C to +120°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsElbow 90° RADIATOR intended for systems cooling engine in vehicles and engines type automotive (for water, liquids cooling na base glycol ethylene). Meets the requirements of the SAE J20 R4 Class D-1 standard. available with arms o length 200, 250 and 300 mm. pressure working: od 0.6 bar for 4.1 bar, depending on diameter elbow. Operating temperature: from -40°C to +125°C. Safety factor (bursting pressure / maximum working pressure) 3:1. Material a connector: black rubber EPDM. Reinforcement: textile braid.
