Is the One-piece adaptor for high-pressure cleaning equipment, brass compatible with M22x1.5 connectors and rated for up to 280 bar and +160Â°C?

Yes. The One-piece adaptor for high-pressure cleaning equipment, brass is compatible with M22x1.5 connectors and is rated for a working pressure up to 280 bar and an operating temperature up to +160Â°C.

Can the One-piece adaptor for high-pressure cleaning equipment, brass be used with hot water or steam up to +160Â°C?

Yes. The One-piece adaptor for high-pressure cleaning equipment, brass is rated for an operating temperature up to +160Â°C, so it can be used with hot water or steam at temperatures up to that limit. Ensure the rest of your system (seals, hoses, fittings) is also rated for +160Â°C and compatible with steam to maintain safety and performance.

Does the One-piece adaptor for high-pressure cleaning equipment, brass withstand corrosion from detergents and chemicals?

Partially. brass offers good general corrosion resistance but may be vulnerable to certain detergents and chemicals used in high-pressure cleaning. Explanation: One-piece adaptor for high-pressure cleaning equipment, brass is made of brass, which is durable, machinable, and commonly used in pressure fittings. Its specifications (working pressure up to 280 bar, operating temperature up to +160Â°C) indicate mechanical and thermal robustness for demanding cleaning tasks. However, brass is an alloy (primarily copper and zinc) and its chemical resistance depends on the specific cleaning agents: - Resistant to: many mild alkaline and neutral detergents, soaps, water-based cleaners, and general-purpose cleaning solutions. Brass tolerates high pressure and temperature in these environments. - Vulnerable to: strong acids (e.g., hydrochloric, sulfuric), strong alkalis at high concentration, chlorinated solvents, ammonia-based cleaners, and bleach (sodium hypochlorite). these can cause dezincification, pitting, or surface corrosion over time. - Chloride-containing solutions (salt water, some bleach/cleaners) accelerate corrosion risk. - Detergent temperature and concentration matter: hot, concentrated chemical solutions increase corrosion likelihood. Recommendations: - Check the chemical compatibility of each detergent/cleaner with brass before use. - When using aggressive chemicals, consider protective coatings, sacrificial anodes, or alternative materials (stainless steel or brass alloys specifically rated for chemical exposure). - Rinse thoroughly with fresh water after chemical cleaning to minimize residual attack. - Regularly inspect One-piece adaptor for high-pressure cleaning equipment, brass for signs of corrosion, leakage, or dezincification. Conclusion: For most common detergents and cleaning conditions, One-piece adaptor for high-pressure cleaning equipment, brass will perform well; for strong, chlorinated, acidic or highly alkaline chemicals, expect increased corrosion risk and consider alternatives or precautions.

One-piece adaptor for high-pressure cleaning equipment, brass

Additional information

Material	B – brass (bronze)

One-piece adapter for high-pressure cleaning devices with metric connection M22x1.5. Material: brass. Working pressure: up to 280 bar. Operating temperature: up to +160°C.

List of product variants

Article number	Product variant name	Nominal inner diameter	Working pressure [bar]
MH-240019	Adapter GZ M22x1.5 / GZ 1/2	-	280
MH-240020	Adapter GZ M22x1.5 / GZ 3/8"	-	280
MH-240021	Adapter GZ M22x1.5 / GW 3/8"	-	280
MH-240023	Adapter GZ M22x1.5, long / GW 1/4	-	280
MH-240024	Adapter GZ M22x1.5 / GZ M22x1.5	-	280
MH-350001	Adapter GZ M22x1.5 / GZ 1/4"	-	280
MH-OT236065	Adapter GZ M22x1.5, long / GZ 1/4"	-	280

One-piece adapter for high-pressure cleaning devices with metric connection M22x1.5. Material: brass. Working pressure: up to 280 bar. Operating temperature: up to +160°C.