Our products
Select options This product has multiple variants. The options may be chosen on the product page / DetailsNozzle comb 8 channel, flat-jet, terminated a thread external 1/4" BSP. intended for blowing off with greater surfaces all contamination: liquids, fine chips, filings itp. is characterized high force blowing at low level noise. ideal for construction knives air. compliant of the standard OSHA 1910.95 (b), STD 1-13.1 and the directive 2003/10/EC. Material: acetal. pressure working: up to 10 bar. Operating temperature: from -20°C to +60°C. flow: 580 l/min (at a pressure of 8 bar). level noise: 81.5 dB (at a pressure of 8 bar). force blowing: 5.05 N.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket water quick coupling NiTO CLICK 1/2" with a thread internal. NiTO CLICK quick couplings are water quick couplings made to the profile of very popular plastic garden quick couplings and compatible with them. Sealing by means of an O-ring placed externally on the plug. Manufactured in Denmark – 5-year warranty. They retain the simplicity of the commonly known plastic quick couplings and are characterized by strength and durability. Intended for water, water with cleaning agents, for use in industry, services, horticulture, agriculture, etc.. Material: brass chrome-plated (matte - satin). Working pressure: up to 25 bar. Operating temperature: from -30°C to +80°C. Sealing: NBR (not suitable for gasolines and oils).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA BAUER lever coupling socket with a flange PN 10 with wide application among others in agriculture, horticulture, industry, construction, road and tunnel building, groundwater drainage, sewage treatment plants, wastewater discharge, and environmental protection. Material: steel carbon, galvanized. Sealing: NR/SBR. Working pressure: 20 bar (for size 89 mm), 12 bar (for size above 89 mm). Operating temperature: from -20°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsElbow 45° with a thread internal BSP intended for use in pipe connections of industrial installations. Material: malleable cast iron. Operating temperature: up to +300°C. Working pressure: 25 bar (up to +120°C), 20 bar (up to +300°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting with a female BSP thread consisting with spigot and ferrule, Intended for hose KUKA 250 for cleaning sewers. Material: steel carbon.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBellows rubber for compensator intended for use in installations, in which medium constitutes hot and cold water, water with addition agents treating, industrial, sea, glycol, weak acids, principles, esters and ketones. Nie serves for conveying media containing oil. BV certificate (Bureau Veritas). Inner layer: rubber EPDM. Reinforcement: nylon cord. Outer layer: rubber EPDM. Operating temperature: from -30°C to +90°C (depending on medium).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA nut with a thread metric intended for mounting clamp DIN 3015 heavy type 201 on a rail ABINP. Material: alloy zinc with aluminum or steel AISI 304.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA gun Nito II Combi with connection with a thread internal 3/4" BSP. used for system NitoClean. Possibility of mounting a lance or nozzle in the Nito 1/2" system. Smooth adjustment of the water jet. A handle with a trigger. pressure working: 25 bar. temperature use: up to +90°C. flow: 20 - 60 l/min (5 bar) depending on used the head.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe high-pressure AURA water gun for industrial applications. The outlet part is terminated with a female 1/4" BSP thread. The gun is also available with a swivel connection to the installation. Housing material: high-strength plastic. Working pressure: up to 180 bar. pressure The permissible: 210 bar. Flow rate: 25 l/min. Operating temperature: up to +150°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNozzle Intended for washing and cleaning water, which stream adjustable is thanks to swivel the head. Flow rate can be completely closed through solid tightening the head. mechanism made of steel stainless (AISI 303), cover and the gasket with rubber EPDM. Available with handle in color blue, red and white, AK-RSHW3-W entirely in color white ( AK-RSHH4-BK and AK-RSHH4-W - version without handle, 1/2" BSP male). W case use with hot water, should maintain particularly agents caution. Not It is intended for steam! Connection: 1/2" BSP female. maximum Working pressure: 16 bar. Maximum Operating temperature: +80°C. Flow rate: 110 l/min (5 bar), 150 l/min (16 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh quality quick coupling on hose garden 1/2" or 3/4". can je mount on two ends hose, co allows fast connection other element system irrigation in garden, on plot or against house. quick coupling equipped is in appropriate profiled teeth, which ensure solid assembly hoses. Material: PVC. Working pressure: up to 6 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPTFE tape FLANGIFLON Intended for sealing flat surface (e.g. connections flange). Working pressure: up to 250 bar (dependent od temperatures). Operating temperature: od -240°C up to +260°C. environment: pH 0 ÷ 14.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTee plug-in "Y", adjustable with a thread external, type R23/M, intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: plastic plastic. Working pressure: 12 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +60°C. sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHandle serves for mounting sensor proximity na actuator cylindrical. brackets sensors DXF: o index codes W09500001... - intended for actuators with sleeve aluminum, o index codes W09500005... - intended for actuators with sleeve of steel stainless. Material: steel stainless, plastic plastic.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA cover gasket MB (for tankwagen couplings) type TWF (for a 4" coupling, an O-ring gasket type TWO is used). Material: teflon (PTFE). Temperature range (approximate): from -20°C to +220°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsExternally Serrated flexible and strong hose suction - delivery for water and sewage. is characterized good resistance on impacts external and heavy conditions use and resistance on radiation UV and low temperatures. used for in systems irrigation, tankers, for rinsing sewers and emptying septic tanks. used also in installations industrial. Hose material: grey-violet PVC. Reinforcement: rigid-PVC spiral. Working pressure: from 3 bar to 8 bar, depending on the diameter hose and temperatures. Operating temperature: od -20°C up to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, soft and flexible, easy in handling hose delivery intended for conveying substances food, requiring the use of rubber free of odour and taste. Contains no phthalates or bisphenol A. Suitable for milk and dairy products, as well as wine, beer, fruit juices. not recommended for oils and greasy substances food. Layer outer hose resistant to abrasion and conditions atmospheric. standards and requirements : industry food, contact with food 1935/2004/EC and 2023/2006/EC (GMP), D.M. 21/03/73, FDA 21 CFR 177.2600, BfR XXI kat. 2. Inner layer: white rubber natural (NR). Reinforcement: cord synthetic. Outer layer: blue EPDM rubber. Working pressure: 6 bar. Operating temperature: from -25°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA general-purpose hydraulic hose. Used for installations at lower pressures. It is characterised by high flexibility and lightness. standards: EN 854 3TE. Inner layer: black, oil-resistant synthetic rubber. Reinforcement: double textile braid. Outer layer: black, oil-resistant synthetic rubber. Working pressure: from 55 bar to 145 bar (depending on the diameter hose). Operating temperature: od -40°C up to +100°C. For water and air, the maximum working temperature is +70°C. For air above 17 bar, microperforation of the outer layer is required.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible and pliable, resistant to temperature hose suction intended for discharge gases, vapours, fumes and air o high temperature. Flame-retardant, to some extent resistant to hot sparks. used mainly in industry metallurgical, foundry, ceramic, glass, at furnaces, engines and as A guard thermal. It is characterised by high compressibility - up to 1:6, a strong construction thanks to glass fabric reinforced with stainless steel threads, and impact resistance thanks to the external spiral. Used only as a suction hose working under vacuum, due to the possibility of gases penetrating outwards under overpressure (degassing). Also available with a stainless steel spiral (from 80 mm diameter). Assembly of the hose on connectors with bridge clamps (lewo-handed). Standard length: from 2 to 10 m - contact Tubes International. Hose material: impregnated fabric glass with fibres of steel stainless, externally grey. Reinforcement: outer spiral with wire and sheet steel galvanized. Operating temperature: od -50°C up to +400°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for oil hydraulic systems, fuels, water-based fluids. Micro-perforated on request (for gases and air). Inner layer: polyester. Reinforcement: a polyester braid. Outer layer: polyurethane. Working pressure: from 80 bar to 200 bar, depending on the hose diameter. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery light and flexible hose suction-delivery, intended for applications general-industrial (in industry, construction, agriculture). It can be used for water, light chemicals, sludge and sewage, agents protection plants, other liquids (without fat, oils and hydrocarbons) as well as for air, vacuum conveying dusts, powders, granulates and other lightly abrasive substances bulk (non-greasy). In that case the abrasiveness and the possible problem of static electricity must be taken into account. W industry food It can be used for conveying food hydrated, acidic, alcohols for 20% np. juices, drinks, beer, wine,(simulants A, B, C; up to +60°C and 2 h). Not recommended for milk and dairy products or oils and greasy food substances. Reinforcement with a rigid-PVC spiral, impact-resistant, provides good resistance to vacuum and kinking of the hose. A smooth inner surface reduces flow losses and ensures ease of cleaning. The outer surface is lightly corrugated, smooth for small diameters. hose FLORIDA complies with the European requirements 1978/142/EEC, 1935/2004/EC, 1895/2005/EC and 10/2011/EU (simulants A, B, C), 2023/2006/EC (GMP). Suitable for temporary contact with food when conveying food substances - under the conditions specified in the manufacturer's declaration of conformity (available at Tubes International). Hose material: transparent PVC. Reinforcement: rigid-PVC spiral (grey). Working pressure at a temperature of 20°C: from 3 bar to 6.5 bar - depending on the diameter hose. As the working temperature rises, the hose's working pressure value decreases. Operating temperature: from -5°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / Details
WEICON anti-corrosion coating zinc ZSN – spray 400 ml
All products | Cleaning agents, maintenance products, assembly compounds, and protective coatings0 złHigh-quality coating zinc for securing all metals against rust and corrosion, repairs defects and securing places po welding, drilling. dryness touch applied coating reaches po 15 min. resistance thermal up to +500°C. longer time securing in ratio for standard coatings (test salt-spray >550 hours in comparison with 240 hours standard type). thanks to high purity zinc (99.9%) and high content metal in dry film (70%), not requires additional layer end. Packaging - spray 400 ml. - Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug double coupling CAMLOCK AA made in accordance with the American military standard MIL-C-27487 (A-A-59326). commonly used as coupling transfer, particularly in industry petrochemical. Working pressure: up to 10 bar, depending on the coupling size. Material: aluminum.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA BPS quick coupling plug without a valve, with a female BSP thread, for lances, guns and washing equipment. Material: steel stainless. pressure working: 400 bar. Operating temperature: +160°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug quick coupling with a thread external NPT and valve intended is for detection gases, devices medical, analyzers chemical, printing inkjet, as equipment devices optical, itp. An audible click signals a successful connection. Length L - total length. Material: acetal (O-ring NBR). Working pressure: for 8.3 bar. Operating temperature: from -40°C to +82°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA bracket swivel intended for mounting on wall drums ECODORA series E-530. Material: steel painted powder.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal ball valve type 4190 intended for installations industrial. can be used for air, gases, water, chemicals, products petrochemical, itp., taking into account chemical resistance material valve and sealing. Meets the requirements of the PED 2014/68/EU directive. Working pressure dependent is od temperature use. Material the body: brass nickel-plated. Material the ball: brass chrome-plated. Material lever: aluminum. sealing the ball: PTFE. sealing stem: FKM + NBR. connection: BSP female. Operating temperature: from -20°C to +150°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve switching 3-way, normally closed, used in hydraulic systems for controlling the flow direction of the working fluid. Control is carried out by means of a hand lever. Material: cast iron (body), hardened steel (stem). Sealing: NBR. Operating temperature: from -20°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal directional valve with control by manual, a lever 90°, most often used for controlling the operation of actuators. It can be mounted in-line, on a wall, directly on actuators or on a connection block. Function 5/2 - five-way, two-position or 5/3 - five-way, three-position. Material: body valve - aluminum, spool - aluminum nickel-plated, sealing - NBR, Cover end - plastic plastic. pressure working: up to 10 bar. Operating temperature: -10°C up to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA set repair intended for valve fast the trigger series VSR. A set contains a gasket flat with rubber NBR and gasket lip with polyurethane. Available in three sizes: 1/8", 1/4" and 1/2".
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsComplete reel intended m. in. for transferring air and cold and hot water. Do mounting inside and na outside rooms. A spring rewind tested for 30000 cycles winding and unwinding. compliant with the directive ATEX II 3 GD c IIB TX. standard in set found high quality hose polyurethane of spring anti-kink and coupling swivel allowing na free operation with connection for it np. a tool pneumatic. length hose supply: 1.5 m. Material: steel carbon painted powder. Sealing: Viton. Operating temperature: up to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAn automatic drum reel made of acid-resistant steel, intended for cold and hot water, oil, greases and other media. The rewind spring tested for 25000 winding and unwinding cycles. compliant with the directive ATEX 94/9 IIB 2GD c T4 T135C X. A hose stopper included in the set. The reel is not equipped with a hose, which should be ordered separately. A swivel bracket or an additional fixed bracket for quick removal (e.g. in winter) ordered separately. Advantages: swivel connection made of AISI 304 steel, Viton sealing. Material: steel AISI 304. Sealing: Viton. Operating temperature: up to +130°C (without hose).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNozzle RM for unblocking and unclogging sewers with a hole centric. Connection: 1/4" BSP female. Material: steel stainless. Working pressure: up to 300 bar. Diameter: 19 mm.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPliable, light and strong hose suction-delivery intended for conveying water, sewage, sludge, liquids non-corrosive, fertilisers natural (slurry). Layer inner with smooth rubber synthetic, resistant to sludge and sewage. corrugated Layer outer ensures small radius bends and is resistant to ozone, conditions atmospheric and aging. intended for applications agricultural, construction and industrial, used for emptying septic tanks, as hose suction for pumps water and sewage, for dewatering and irrigation, for tankers. can be used for extraction air, dust and for bulk materials. assembly – depending on the diameter and type fittings using bands steel, straps, clamps or ferrule clamping. Inner layer: black synthetic rubber (SBR). Reinforcement: cord synthetic, steel spiral. Outer layer: black corrugated synthetic rubber. Working pressure: 3 bar. Operating temperature: od -30°C up to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA high-quality NiTO water quick coupling socket 1/2" with a thread external and a shut-off valve. Material: brass chrome-plated. Working pressure: up to 25 bar. Operating temperature: up to +80°C. Sealing: NBR (not suitable for gasolines and oils). For the valve, an EPDM O-ring.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsIntended for installation with media food, also containing oils and fats. Nie is suitable for water drinking. Marked na bellows white stripe. Layer inner: white NBR rubber (NBR). Reinforcement: nylon cord. Outer layer: CR rubber (chloroprene). Flanges: galvanized carbon steel. Operating temperature: from -20°C to +90°C (momentarily +100°C depending on medium).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAn AK swivel fitting with a male tapered BSPT thread with a 200 mm long anti-kink spring. Intended for mounting in industrial hoses, in particular washing hoses at the point of connection with a water gun, where, due to operating the gun, bending of the hose and rotation of the gun are required. The spring provides additional protection for the hose. Material: steel AISI 316. Working pressure: up to 40 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting push-in with an O-ring for a gun high-pressure. Material: steel carbon.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLance without insulation thermal type MT1 intended for a high-pressure washer. Connections: (inlet) M22x1.5 male / (outlet) 1/4" NPT female. Working pressure: up to 280 bar. Flow rate: 40 l/min. Operating temperature: up to +150°C. Material: steel stainless.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA DIN 3015 standard clamp, type 100 (without a top plate) intended for quick, easy, durable and aesthetic mounting of pipes, cables and hoses in various branches of industry, in above-ground and marine installations. Made in accordance with the DIN 3015 standard. The clamp is mounted to the structure by welding the clamp base (it is also possible to bolt it on or mount it on a rail). As standard, the clamp has a profiled (grooved) surface of the pipe hole. For dimension group 0 there is one bolt with an Allen head, for dimension groups 1 ÷ 6 there are two bolts with an Allen head. In addition to the standard metal element, you can order: extension plates, rails and bolts for mounting clamp sets. The selection of element should be consulted with TUBES INTERNATIONAL®. Material clamp: green polypropylene. Material bolts: steel galvanized. Material base: steel carbon. Operating temperature: from -30°C to +90°C.
