Our products
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHERBIE CLIP® reusable hose ties made of black polyamide (PA66) resistant to UV rays. A polypropylene (PP) version is also available. The double tooth design provides more than twice the clamping force compared to similar products with only a single row. The design of the ties allows for easy and quick installation and removal using designated tools, standard "frog" type tools, or manually. Operating temperature: from -40°C to +125°C (PA66, temporarily up to +170°), from -40°C to +60°C (PP, temporarily up to +90°C).- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFoam and spraying gun for mounting lances and nozzles (outlet quick coupling DN11.8). Features smooth flow regulation and trigger lock (no insulation on the trigger). Automatic flow shut-off when the trigger is released. Material: brass. Trigger made of stainless steel. Cover made of blue EPDM rubber. Sealing: EPDM. Connection (inlet): 1/2" BSP female thread. Maximum working pressure: 24 bar. Maximum operating temperature: +95°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality aluminum compressed air gun designed for removing all contaminants from surfaces: liquids, fine chips, shavings, etc. Flow regulation by the degree of lever pressure. Equipped with a pressure reducing valve for adjusting maximum flow according to application. Made of forged aluminum, protected by anodizing, ensuring high strength, durability, and corrosion resistance. Can be used with water. Ideal for even the most challenging working conditions. The gun is equipped with a standard nozzle with a hole diameter of 1.5 mm, interchangeable, with an external connection thread M12x1.25. Instead of the standard nozzle, other nozzles can be installed – see EWO gun accessories. Depending on the connection, we distinguish between a gun finished with a EUROSTANDARD 7.2 plug or a hose end with diameters of 6 mm, 9 mm, and 13 mm. Material: aluminum (forging). Nozzle hole diameter: 1.5 mm. Maximum pressure: 10 bar. Operating pressure: 2 ÷ 8 bar. Operating temperature: from -10°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight adjustable pressure gauge connector ORFS with internal BSP thread (sealed with a metal washer), type FAV-B. Material: carbon steel, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose repair coupling, available in sizes 1/2", 3/4", 1", designed for standard repairs in case of mechanical damage, as well as for extending garden hoses. Specially shaped nut ensures a perfect connection with the hose and easy installation. Material: PVC. Working pressure: up to 6 bar.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsScrew fitting with internal BSP thread and external BSPT thread for use in piping connections of industrial installations. Conical sealing between internal components. Material: ductile iron. Operating temperature: up to +300°C. Working pressure: 25 bar (up to +120°C), 20 bar (up to +300°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBand-It® Standard system tape, made of AISI 201 steel. Standard is the basic clamping system using roll tape, formed into bands on hoses of any diameter (a double loop of tape is recommended). Separate clips with "noses" must be purchased to secure the end of the tape after bending. Installation using tools BD-C07599, BD-C00189, BDC00399. Length: 30.5 m.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsT-shaped plug connector, adjustable with external thread, type R35, intended for connecting wires and other components in pneumatic systems. Easy and quick to use for multiple assemblies without loss of sealing on the mechanical and pneumatic sides. Material: plastic. Working pressure: 12 bar. Working medium: vacuum, air. Operating temperature: from -20°C to +60°C. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCover gasket MB (for tank truck connections) type TWF (for 4" connection, use O-ring gasket type TWO). Material: nitrile (NBR, Perbunan). Temperature range (approximate): from -20°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard gasket for the female part (socket) of the CAMLOCK coupling. Material: EPDM. Operating temperature: from -30°C to +150°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose with a conductive inner layer (R<1.2x105 Ω/m) designed for natural gas (CNG - Compressed Natural Gas). Used for filling tanks of CNG-powered vehicles. The outer layer is characterized by enhanced resistance to changing weather conditions and abrasion. Meets NFPA 52, ANSI/CSA NGV 4.2-2014, CSA 12.52-2014 requirements. Standards: ISO 8031, ISO 15500-17. Inner layer: conductive polyamide. Reinforcement: aramid braiding. Outer layer: microperforated polyurethane. Working pressure: 345 bar. Operating temperature: from -40°C to +82°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGeneral-purpose hydraulic hose. Standards: EN 853 1SN, SAE 100R1AT. Inner layer: black, oil-resistant synthetic rubber. Reinforcement: single steel braid. Outer layer: black, oil-resistant synthetic rubber. Working pressure: from 40 bar to 250 bar depending on hose diameter. Operating temperature: from -40°C to +100°C (temporarily +120°C). For water and air, maximum operating temperature +70°C. For air above 17 bar, micro-perforation of the outer layer is required.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, very flexible and elastic hose designed for the extraction of hot vapors, smoke, gases, blowing, and the discharge of cooling air. Chemically resistant, UV resistant, and aging resistant. Used, among others, for gas extraction in the metallurgical industry, foundries, glass and ceramic industries, for hot air in industrial dryers, in printing houses and paper mills, in vehicles and engines for cooling air, incinerators, as well as for the extraction of exhaust gases and welding gases. Smooth inside (when straightened), with a very small bending radius allowing easy installation in tight spaces of equipment and vehicles. Not recommended for continuous dynamic bending. Installation with clamps. Other diameters and lengths, soft ends of sections, etc., available on special order. Hose material: glass fabric impregnated with red silicone. Reinforcement: internal spiral of steel wire, external strand of fiberglass. Operating temperature: from -70°C to +250°C (temporarily up to +300°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality suction hose designed for the transfer of wine, beer, fruit juices, etc., and food substances that do not contain fats, requiring the use of odorless and tasteless rubber. Free from phthalates and bisphenol A. Designed for high-class wines and spirits, for use in breweries and distilleries. Widely used in the spirits industry for the transfer of strong alcohols with concentrations up to 96%. Features copper wires ensuring electrical continuity between the hose ends, which increases the safety of transferring high-proof, flammable alcohol (ensure contact of the wire with the end during installation). The outer layer is resistant to abrasion, aging, and weather conditions. Standards and requirements: Food industry, food contact 1935/2004/EC, 2023/2006/EC (GMP). Inner layer compliant with FDA 21 CFR 177.2600, BfR XXI cat.2, D.M. 21/03/73. Inner layer: white butyl rubber (IIR). Reinforcement: synthetic cord. Outer layer: red butyl rubber (IIR). Working pressure: 10 bar. Operating temperature: from -40°C to +120°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal spray with strong adhesion and resistance to high pressures, lubricant with molybdenum disulfide additive. Ensures smooth operation of machine components and protects against corrosion. Due to the presence of MoS2, it protects surfaces and significantly reduces friction and material wear in devices such as: sliding and ball bearings, gearboxes, levers and guides, shafts, springs. Operating temperature range: from -20°C to +120°C. Packaging - spray 400 ml.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCETOP bracket for mounting with a swivel flange. Included: 4 screws with washers. Material: cast aluminum (flange), galvanized carbon steel (screws and washers).
- Select options This product has multiple variants. The options may be chosen on the product page / Details15 mm plug shape C, DIN 43650, for MACH 16 MSV valve, electric control. Material: plastic.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling plug with valve for hose is intended for gas detection, medical devices, chemical analyzers, inkjet printing, as equipment for optical devices, etc. The effectiveness of the connection is indicated by an audible click. Length L [mm] - total length. Material: acetal (NBR o-ring). Working pressure: up to 8.3 bar. Operating temperature: from -40°C to +82°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsInspection window designed for monitoring hydraulic oil level, mounted on the side wall of the tank. The spherical shape of the inspection opening allows for side observation. Diameter D [mm] - size of the inspection opening. Material: aluminum (body), polyamide (inspection opening), guarnital (fiber washer). Operating temperature: from 0°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPermanent sling intended for ECODORA drums series E-560. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThree-way switching valve, normally open, used in hydraulic systems to control the direction of the working fluid flow. Control is implemented via a manual lever. Material: body - cast iron, stem - hardened steel. Sealing: NBR. Operating temperature: from -20°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal pneumatic control distribution valve, most commonly used for controlling the operation of actuators. It can be mounted inline, to a wall, directly to actuators, or on a connection block. Function 3/2 - three-way, two-position. Material: valve body - aluminum, slider - nickel-plated aluminum, sealing - NBR, end cover - plastic. Working pressure: up to 10 bar. Operating temperature: -10°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsO-ring seal set, inch, for general use. Material: NBR, hardness 70 Shore. Detailed information on quantities and sizes is available in the photo.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAnaerobic sealant for threaded connections up to 3/4" in metal installations. Perfectly suitable for fine-threaded joints exposed to vibrations and shocks. Not recommended for use with oxygen. Maximum thread diameter: 3/4". Packaging capacity: 50 ml. Operating temperature range: from -55°C to +150°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAutomatic drum reel made of stainless steel designed for cold and hot water, oil, lubricants, and other media. The retractable spring tested for 25,000 winding and unwinding cycles. Compliant with ATEX directive 94/9 IIB 2GD c T4 T135C X. Includes hose bumper. The drum is not equipped with a hose, which must be ordered separately. Rotating suspension or additional fixed suspension for quick disassembly (e.g., in winter) ordered separately. Advantages: rotating connection made of AISI 304 steel, viton sealing. Material: AISI 304 steel. Sealing: viton. Operating temperature: up to +130°C (without hose).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDrain valve MWDSN with external and internal thread used in compressed air systems to reduce noise levels. Material: nickel-plated brass. Operating temperature: from -10°C to +80°C. Working pressure: 12 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSAFLOK® B socket with BSPT external thread is a variant of the CAMLOCK coupling with protection against accidental disconnection. The protection consists of spring-loaded latches located in the levers of the socket. During the closing of the lever, the latches automatically lock. Unlocking when opening requires pulling back the latches. The SAFLOK® B socket is compatible with other CAMLOCK couplings made according to MIL-C-27487 standards. Spare parts are available: levers with latches and pins. The coupling size 1/2" has a thread of 1/2" and a socket of 3/4". Material: AISI 316 steel. Sealing: NBR. Working pressure: 20 bar (1/2" ÷ 2"), 10 bar (2.1/2" ÷ 4"). Operating temperature: from -40°C to +93°C.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° elbow with external BSPT thread for use in piping connections of industrial installations. Material: ductile iron. Operating temperature: up to +300°C. Working pressure: 25 bar (up to +120°C), 20 bar (up to +300°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsWobble flange with a single ear for mounting on the rear part of the actuator cover, without a pin. Allows for the movement of the pneumatic actuator during operation. Included: 4 screws. Material: cast aluminum (flange), steel + bronze + PTFE (bushing), galvanized carbon steel (screws and washers).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDesigned for use in installations where the medium consists of chemical products, petroleum derivatives with aromatic compound content up to 50%, acids, bases, oil-laden air (up to +90°C), natural gas (not LPG), oil-contaminated water, cooling water with anti-corrosive agents. Marked on the sleeve with a single green stripe. Inner layer: CSM rubber (Hypalon). Reinforcement: nylon cord. Outer layer: CSM rubber (Hypalon). Flanges: galvanized carbon steel. Operating temperature: from -20°C to +100°C (temporarily +110°C depending on the medium).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHand protection cream - is a traditional skin protection agent during work with oily and greasy contaminants, as well as with strongly adhering dirt. It protects the skin while working with oils, fats, paint, graphite, soot, tar, polyester resin, silicone mass, and mineral fiber. Packaging - 100 ml.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsInsulated extension lance with nozzle cover, designed for high-pressure washer. Connections: (inlet) GZ 1/4" BSP / (outlet) GW 1/4" NPT. Working pressure: up to 250 bar. Maximum pressure: 280 bar. Flow rate: 45 l/min. Operating temperature: up to +160°C. Material: stainless steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMagnetic drain plug mounted in the lower part of the tank. It has a magnetic pin that attracts and retains ferromagnetic particles floating in hydraulic oil. This protects the moving parts of pumps, distributors, valves, etc. from damage, increasing their lifespan. Material: aluminum (body), neodymium (magnetic pin up to 1"), alnico (magnetic pin 1.1/4"), aluminum (washer).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMini mushroom valve, mechanically controlled, commonly used for controlling actuator operation. It can be mounted in any position. A small force is required to actuate the valve. Function 3/2 NO and NC - three flow paths, two positions. Connection: GW M5, plug-in connection Ø4 and Ø6 (axial or side). Actuation: push rod, panel-mounted push rod, lever with roller, lever with single-acting roller. Material: valve body - aluminum, push rod - nickel-plated brass, sealing - NBR, springs - stainless steel. Nominal flow: 60 l/min (at input pressure 6 bar Δp = 1 bar). Actuation force (push rod at 6 bar): 8 N. Operating pressure: from 0.5 to 10 bar. Operating temperature: -10°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose guard (handle) for cleaning and washing hoses protects the hose end from excessive bending and facilitates hose operation. Available in colors: blue, red, yellow, green. Material: EPDM.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlat nozzle gun (comb) designed for removing all contaminants from larger surfaces: liquids, fine chips, shavings, etc. Also suitable for drying surfaces. Lightweight construction and ergonomic shape ensure easy and comfortable use. The gun is equipped with an 8-stream flat nozzle that guarantees high blowing force at low noise levels. The lever mechanism allows for precise dosing of the flowing medium. Available model with flow regulation. Compliant with OSHA standard 1910.95 (b), STD 1-13.1, and directive 2003/10/EC. Body material: acetal. Nozzle material: POM. Sealing: NBR. Working pressure: up to 8 bar. Operating temperature: from -10°C to +80°C. Flow rate: 580 l/min (at 8 bar pressure). Noise level: 81.5 dB (at 8 bar pressure). Blowing force: 5.05 N.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° SAE 6000 flange connection with a compact design and external BSP thread for use in hydraulic systems. Supplied with mounting screws and an o-ring seal (NBR). Material: carbon steel, galvanized. Operating temperature: from -20°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / Detailscoupling with a spigot and external thread, type R6, designed for connecting pipes and other components in pneumatic systems. Easy and quick to use for multiple assemblies without loss of sealing on the mechanical and pneumatic sides. Material: nickel-plated brass. Working pressure: 16 bar. Working medium: vacuum, air. Operating temperature: from -20°C to +80°C. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMonoblock sliding valve distributor YFM55 controlled by a manual lever with centering springs. Designed for hydraulic systems of cranes, lifts, construction machines, agricultural equipment, etc. Standardly equipped with a type C safety valve (set to 140 bar) and type 1 sliders. Material: cast iron (body), hardened steel (sliders). Sealing: NBR. Maximum working pressure: 315 bar. Maximum return pressure: 25 bar. Operating temperature: from -20°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality quick coupling for 1/2" or 3/4" garden hose with STOP function - automatically cutting off the water supply - allows for the exchange of various installation components without the need to turn off the water. It can be mounted at the ends of the hose, enabling quick connection of other elements of the irrigation system in the garden, on the plot, or in front of the house. The quick coupling is equipped with appropriately shaped teeth that ensure a secure attachment of hoses. Material: PVC. Working pressure: up to 6 bar.
