Our products
Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve reducing REG, series SKILLAIR®, with plates end, serves for regulation pressure working, ensuring correct operation devices. Size: 100, 200, 300. range pressure output: 0÷2, 0÷4, 0÷8, 0÷12 bar. Supply pressure: up to 15 bar (13 bar - size 300). Operating temperature: up to +50°C. Connection: 1/4" BSP female ÷ 1". Pressure gauge connection: 1/8" BSP female. Flow rate: 1600 l/min - size 100, 3500 l/min - size 200, 7000 l/min - size 300 (at an inlet pressure of 6 bar Δp = 1 bar).- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure 90° adapter type A115C compact with BSP female thread (60° cone sealing). Material: AISI 316L.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting 90° tubular BURGACLIP with a female UNF thread, "short drop" - with short part with a nut, for hose for air conditioning type 3090. allows on connection lines rubber with element the system air conditioning. clips and clamps available as separate assortment. Material: steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRing inch front for use in connectors type LET-LOK®. Material: steel AISI 316.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting straight JIC 37° with NPT male thread (sealing on the thread – PTFE tape or anaerobic sealant). Material: AISI 316.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLeak-free Quick-coupling plug type "flat-face" intended mainly for construction machinery, where large pressure surges occur. Version with a static-pressure eliminator. The quick coupling can be operated with one hand. Depending on the application, the appropriate seal material should be selected. interchangeable with quick coupling ISO-F from other manufacturers. Standard: ISO 16028. Application: power hydraulics (hydraulic oil), industrial. Working pressure: up to 500 bar. Material: steel with a zinc-nickel coating. Sealing: NBR (from -25°C to +100°C). Maximum static pressure when connecting quick couplings with a plug with a pressure eliminator: on the socket side 0 bar, on the plug side 400 bar. The flow is given at Δp = 3 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong and pliable hose suction - delivery for low-pressure parts installations hydraulics power, based on the requirements of the SAE J517 100 R4 standard. used in particular as hose suction and return oil. intended primarily for liquids hydraulic based on oil mineral and some synthetic liquids hydraulic. can be also used for liquids hydraulic based on water and for water at limiting temperatures up to +70°C. is suitable for conveying many liquid products industry petrochemical o low content compounds aromatic. Not recommended for gasoline, oil drive and oils based on esters phosphate. Layer inner with black, smooth, oil-resistant rubber synthetic. Reinforcement consists of layer cord synthetic and steel spiral ensuring high resistance to vacuum and very good flexible hose without kinking. Layer outer with black rubber synthetic, resistant to abrasion, conditions atmospheric and light oiling. Standard length: 60 m (or 120 m - contact Tubes International). Inner layer: black synthetic rubber. Reinforcement: cord synthetic, steel spiral. Outer layer: black synthetic rubber. Working pressure: from 2 bar to 21 bar - depending on the diameter hose. Operating temperature: od -40°C up to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal directional valve with control by mechanical, a lever with a roller, most often used for controlling the operation of actuators. It can be mounted in any position. Function 5/2 - five-way, two-position. Size: 1/8". Material: body valve - aluminum, spool - aluminum nickel-plated, sealing - NBR, Cover end - plastic plastic. pressure working: up to 10 bar. Operating temperature: -10°C up to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSet VFR + L series NEW DEAL o high degree reliability with valve reducing type piston, consists with valve shut-off, filter air, valve reducing and lubricator. intended is for use in heavy conditions, guaranteeing at this stability pressure set at variable pressure supply and operation at low values flow. valve V3V allows quickly aerate and vent configuration. Connection: 1/4" BSP female, 3/8", 1/2", 3/4", 1". Supply pressure: up to 18 bar, for trigger RA up to 10 bar. range pressure output: 0÷8, 0÷12 bar. Filtration grade: 4 µm, 20 µm, 50 µm. Condensate drain: manual / semi-automatic (RMSA), automatic (SAC, RA). Connection pressure-gauge: 1/8" BSP female. Operating temperature: up to +50°C. Flow rate nominal: 480 l/min - 1/4", 1900 l/min - 3/8", 1/2" (at an inlet pressure of 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA swivel STORZ coupling with a female BSP thread intended for transfer installations for liquid and bulk substances. Used in firefighting, irrigation systems, the chemical and food industry, agriculture, etc.. With a symmetrical design of the connection part, thanks to which they can be easily connected together. Parts with the same lug spacing can be connected. Material: brass. Working pressure: 16 bar. Gasket: black NBR rubber.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure 90° adapter type A115 with BSP female thread, with a swivel nut (60° cone sealing) and with BSP female thread, with a swivel nut (60° cone sealing). Material: AISI 316L.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFilter GAF series GA with a female BSP thread serves for removing contaminants contained in compressed air in order to correct use element systems pneumatic. W the set found A handle assembly. Do connecting individual element of each other, serve sets connecting GA (shape L, T, U). Size: 200, 300, 400, 600. Filtration grade: 40 µm. Supply pressure: up to 10 bar. Operating temperature: od -5°C up to +70°C. Connection: 1/8" BSP female ÷ 1". Condensate drain: automatic (A). Flow rate: 1700 l/min - size 200, 3000 l/min - size 300, 4500 l/min - size 400, 10500 l/min - size 600 (at an inlet pressure of 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAn ISO-B quick-coupling socket with a valve, BSP female thread, for use in high-pressure industrial installations (water, fuels and oils, gases, chemicals). Together with a plug, it forms a double shut-off coupling, which can be found wherever transmission lines must be connected and disconnected for servicing or maintenance of equipment and fluid loss is undesirable. It can be used interchangeably with ISO-B quick couplings from other manufacturers. Material: brass. Sealing: NBR. Operating temperature: from -20°C to +100°C. Working pressure: up to 180 bar (depending on the quick-coupling size). Safety factor 4:1. The flow is given for a pressure drop of 3 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA blanking nut intended for blanking one of the unused ports of the fitting (np. tee) o diameter metric. Material: steel AISI 316.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSleeve dociskowa, type FC, umieszczona in nut, It allows odpowiednie pressing tubes inch for fittings (fittings). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSleeve mounting crimped for ends hoses for freon, type 2051. Material: aluminum.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA lip gasket intended for suction-delivery hoses. Limited resistance to greases and oils. Material: black NBR rubber. Operating temperature: from -40°C to +110°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight and flexible hose delivery intended for conveying liquid products industry petrochemical, containing up to 30% compounds aromatic. It has a copper wire ensuring electrical continuity between the hose ends. Layer outer resistant to abrasion, oil and conditions atmospheric. Standard length: 60 m (or 120 m - contact Tubes International). Inner layer: black NBR rubber. Reinforcement: cord synthetic. Outer layer: black synthetic rubber. Working pressure: 10 bar. Operating temperature: od -20°C up to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve with connection NAMUR adjustable pneumatic, is used to control drives pneumatic. Ich connection allows na mounting valves directly na body actuators. Function 5/2 - five-way, two-position. Material: body valve - aluminum, spool - aluminum nickel-plated, sealing - NBR, Cover end - Hostaform®. minimal pressure supply pilots: 2.5 bar. Operating temperature: -10°C up to +60°C. flow nominal: 1100 l/min (at pressure inlet 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter, fitting high-pressure straight, type A105, with BSP female thread and swivel nuts (60° cone sealing). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFilter with reducer (filter-regulator) FR, series SKILLAIR®, is a device consisting of a filter and a reducing valve. It reduces and purifies the air supplied by the compressor. Size: 100, 200. range pressure output: 0÷2, 0÷4, 0÷8, 0÷12 bar. Supply pressure: up to 15 bar, depending on size. Operating temperature: up to +50°C. Connection: 1/4" BSP female ÷ 1/2". Pressure gauge connection: 1/8" BSP female. Condensate drain: manual / semi-automatic (RMSA), automatic (RA, SAC). Flow rate: for 3000 l/min at an inlet pressure of 6 bar Δp = 1 bar), depending on size.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting tubular with valve R134 HP (16 mm) or LP (13 mm) with a female UNF thread, for hose for air conditioning type 3055. Material: steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA strong suction-delivery hose intended for unleaded petrol, diesel oil and liquid fuels containing up to 50% aromatic compounds. Used in industry and transport for conveying and handling petrochemical products, in road tankers, at road and rail fuel unloading and loading terminals. Layer inner with black, smooth, antistatic (R ≤ 10 6 Ω) rubber NBR (NBR1). Reinforcement layers high-strength cord and spiral steel. It has two copper wires ensuring electrical continuity between the hose ends – provided they are correctly connected to the ends. Layer outer with black, antistatic (R ≤ 10 6 Ω) rubber synthetic, self-extinguishing, resistant to abrasion, oil, ozone and conditions atmospheric. Resistance through the hose wall R ≤ 10 9 Ω (type M/T). compliant with standards EN12115:11 (16 bar), EN 1761(10 bar), ISO 2929 (10 bar), TRbF. Certified for Ex explosion-hazard zones (ATEX). excellent resistance to action products petrochemical, strong The design and properties antistatic both layer internal and outer, built-in cable antistatic, recommend this hose for demanding applications, also in explosion-hazard zones. In every case, however, use in an explosion-hazard zone (ATEX) should be preceded by a risk analysis carried out by a specialist. A version without a wire (type Ω/T) is available on special order.. Inner layer: black, smooth NBR rubber. Reinforcement: cord synthetic, steel spiral. Outer layer: black synthetic rubber. Working pressure: 16 bar. Operating temperature: od -30°C up to +90°C (momentarily up to +110°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAn adjustable STORZ nozzle with a symmetrical coupling, intended for forming a liquid stream. For use e.g. at firefighting stations. Material: aluminum. Gasket: white NBR rubber.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA LET-LOK® straight fitting with a thread external BSP (seal LOK) for a metric tube intended mainly for the chemical, petrochemical and pharmaceutical industry, power generation, nuclear power plants and process engineering. The permissible working pressure is determined on the basis of the outer diameter and the wall thickness of the tube (details in the attachment). Material: steel AISI 316.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLeak-free Quick-coupling socket type "flat-face" Intended mainly for construction machinery, where large pressure surges occur. It has a stem to prevent accidental disconnection. The quick coupling can be operated with one hand. Depending on the application, the appropriate seal material should be selected. interchangeable with quick coupling ISO-F from other manufacturers. Standard: ISO 16028 (except for size 3/16"). Application: power hydraulics (hydraulic oil), industrial. Working pressure: up to 720 bar. Material: steel with a zinc-nickel coating, except for size 3/16", made of galvanized steel. Sealing: NBR (from -25°C to +100°C), Viton (from -15°C to +200°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsYES – confirmation logic element. Controlled by compressed air, reset by a mechanical spring. Can be mounted in any position. Material: body – plastic, spindle – aluminum, sealing – NBR. Nominal flow: 100 Nl/min at 6 bar with a 1 bar pressure drop. Built-in push-in fittings for 4 mm tubing. Operating temperature: from -10°C to +60°C. Working pressure: 0 to 8 bar. Control pressure: 1.5 to 8 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure adapter type A107 without a nut, with BSP male thread (60° cone sealing). Material: AISI 316L.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFilter D series SKILLAIR®, without plates end, serves for removal with high accuracy contaminants liquid and solid, contained in compressed air. Size: 100, 200, 300. Filtration grade: 99.97% at 0.01 µm. Supply pressure: up to 15 bar, depending on size and kinds trigger. Operating temperature: up to +50°C. Condensate drain: manual / semi-automatic (RMSA), automatic (SAC, RA). Flow rate: 230 l/min - size 100, 360 l/min - size 200, 500 l/min - size 300 (at an inlet pressure of 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting tubular with a female UNF thread, for hose for air conditioning type 3055. Material: steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting straight JIC 37° with NPT male thread (sealing on the thread – PTFE tape or anaerobic sealant). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA LET-LOK® straight fitting with a BSPT male thread for an inch tube intended mainly for the chemical, petrochemical and pharmaceutical industry, power generation, nuclear power plants and process engineering. The permissible working pressure is determined on the basis of the outer diameter and the wall thickness of the tube (details in the attachment). Material: steel AISI 316.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA STORZ reducing coupling intended for transfer installations for liquid and bulk substances. Used in firefighting, irrigation systems, the chemical and food industry, agriculture, etc.. Characterized by a large, unobstructed flow diameter. With a symmetrical design of the connection part, thanks to which they can be easily connected together. Parts with the same lug spacing can be connected. Material: brass. Working pressure: 16 bar. Gasket: black NBR rubber.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe CEJN series 525 (NORDIC RANGE) quick-coupling socket with a shut-off valve and a BSP female thread. The socket has an additional O-ring, which makes it suitable for gas installations. It also has a ring to prevent accidental disconnection. As a single-shut-off quick coupling it can only be used for size 1/4". It is intended for heavy-duty operating conditions. Application: power hydraulics (hydraulic oil), industrial (water, steam, fuels and oils, gases and chemicals). Material: zinc-nickel coated steel. Working pressure: up to 450 bar (depending on the diameter). Safety factor 4:1. Sealing: viton or NBR. Operating temperature: from -30°C to +100°C (for NBR), from -15°C to +200°C (for viton). The flow is given for a pressure drop of 3 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery strong and flexible, resistant to abrasion hose suction-delivery intended for pressure conveying oils and fuels. special blend PVC, PU and NBR ensures high resistance to oil drive, biodiesel, and blue oil (fuel used in maritime navigation). Reinforcement spiral with galvanized wire steel, embedded in layer internal, PVC, ensures good resistance to vacuum and kinking hose. smooth Layer inner reduces losses flow. thanks to reinforcement a braid hose has high pressure working and small deformation under pressure. used in distribution, refuelling and handling oils and fuels, e.g. in tankers automotive for refuelling oil heating in domestic systems heating. hoses o diameters 76 ÷ 102 mm have external layer polyurethane (increasing significantly resistance to abrasion) and copper cable antistatic. Inner layer: black PVC / PU / NBR. Reinforcement: steel spiral, a polyester braid. Outer layer: black PVC / PU / NBR (diameter 19 mm ÷ 63 mm); black PU (diameter 76 mm and more). Operating temperature: od -25°C up to +60°C (working pressure depends on temperature).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve throttle type MRF NTB series COMPACT "N" used for simultaneous adjustment flow in both directions - during filling and venting, used in systems pneumatic for adjustment rate flowing stream compressed air and direction flow. Equipped with a push-in connector ensuring easy disassembly of pneumatic lines. Setting adjustment by means of an adjustment knob and/or a screwdriver; possibility of securing the setting with a lock nut. Size: M5, 1/8″, 1/4″, 3/8″, 1/2″. pressure working: up to 10 bar. Operating temperature: from -10°C to +50°C. Material: plastic plastic.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure adapter type A205, reducer BSP female thread (thread sealing) na NPT male thread (thread sealing). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFilter with carbon active AC series SYNTESI®, without end connections, serves for cleaning compressed air with residue oil, solvents and odors. purification occurs due to flow air through porous granulate carbon active o high absorption contaminants. is to most effective method purification air used in industrial installations pneumatic. efficiency and service life the insert filtration can increase preceding go filter accurate (0.01µm) and filter preliminary (5µm). Size: SY1, SY2. residue oil at 20°C: 0.003 mg/m 3 – Class cleanliness air acc. to ISO 8573-1: 1-7-1 (at difference pressure not exceeding 75 mbar). service life the insert: 4000 hours (at difference pressure not exceeding 75 mbar). Supply pressure: up to 15 bar - size SY1, up to 13 bar - size SY2. Operating temperature: od -10°C up to +50°C. Condensate drain: manual / semi-automatic (RMSA). Flow rate recommended: 350 l/min - size SY1, 800 l/min - size SY2 (at pressure 6.3 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAn assembly wrench for STORZ fire couplings, sizes A (110), B (75) and C (52). Material: steel (plastic handle).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight connector BURGACLIP for hose type 3090 for air conditioning. Material: steel.
