Our products
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAutomatic dispensing gun type 227 made of aluminum with a flow rate of 60 l/min, intended for diesel fuel. Standardly equipped with a swivel connection 1" BSP, which prevents hose twisting. Features an automatic fuel shut-off system. Designed for compatibility with all dispensers at fuel stations. Not intended for AdBlue® or unleaded gasoline. Outlet diameter: 24 mm. Material: rubber-coated aluminum. Color: black. Flow rate: 60 l/min. Swivel connection: yes.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAutomatic dispensing gun type 227X made of stainless steel with a flow rate of 40 l/min, intended for AdBlue and water. Standardly equipped with a swivel connection GW 1" BSP, which prevents hose twisting. Features an automatic medium shut-off system. Designed for compatibility with all dispensers at fuel stations. Not intended for diesel fuel or unleaded gasoline. Outlet diameter: 18 mm. Material: stainless steel coated with rubber. Color: blue. Flow rate: 40 l/min. Swivel connection: yes.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFilling gun type 222 made of glass fiber reinforced polypropylene intended for diesel fuel. Standardly equipped with a rotating connection GW 1" BSP, which prevents hose twisting. It does not have an automatic fuel shut-off system, therefore it is not suitable for use with dispensers at fuel stations. Not intended for AdBlue® or unleaded gasoline. Outlet diameter: 25 mm. Material: glass fiber reinforced polypropylene. Color: black. Flow rate: 60 ÷ 80 l/min. Rotating connection: yes.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFuel dispensing gun type 223 made of aluminum with a flow rate of 60 ÷ 120 l/min, intended for diesel fuel. Standardly equipped with a swivel connection GW 1" BSP, which prevents hose twisting. It does not have an automatic fuel shut-off system, therefore it is not suitable for use with dispensers at fuel stations. Not intended for AdBlue® or unleaded gasoline. Outlet diameter: 25 mm. Material: aluminum. Color: silver. Flow rate: 60 ÷ 120 l/min. Swivel connection: yes.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdBlue® and water dispensing gun type 223X made of polyamide with a flow rate of 60 l/min. Standardly equipped with a ribbed nozzle for a 1" hose. Does not have an automatic shut-off system for the medium. Not intended for diesel fuel or unleaded gasoline. Outlet diameter: 18 mm. Material: glass fiber reinforced polyamide. Color: blue. Flow rate: 60 l/min. Swivel connection: no.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsScrewed end fitting type S2 with external BSPT thread (seal on the thread), manufactured according to standard EN 14424, intended for rubber hoses and certain types of thermoplastic hoses, with soft textile reinforcement (without wire spiral). Commonly used in the fuel sector in fuel and gas distribution lines (e.g., LPG). Basic version made entirely of brass; also available in a stainless steel version (end fitting) with a chrome-plated brass sleeve. Material: brass (B). Working pressure: 16 bar (up to 25 bar for DN25). Operating temperature: from -20°C to +65°C (from -30°C to +70°C - for LPG).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsScrewed end fitting type S4 with external BSP thread (flat sealing), made according to standard EN 14424, intended for rubber hoses and certain types of thermoplastic hoses, with soft textile reinforcement (without wire spiral). Commonly used in the fuel sector in fuel and gas distribution lines (e.g., LPG). Basic version made entirely of brass; also available in a chrome-plated brass version (end and sleeve) and in a stainless steel version (end) with a chrome-plated brass sleeve. Material: brass (B). Working pressure: 16 bar (up to 25 bar for DN25). Operating temperature: from -20°C to +65°C (from -30°C to +70°C for LPG).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsScrewed end fitting type S1 with internal BSP thread (with flat gasket), manufactured according to standard EN 14424, intended for rubber hoses and certain types of thermoplastic hoses, with soft textile reinforcement (without wire spiral). Commonly used in the fuel sector in fuel and gas distribution lines (e.g., LPG). Basic version made entirely of brass; also available in a chrome-plated brass version (nut and sleeve) and in a stainless steel version (end) with a chrome-plated brass sleeve. Material: brass (B), polyurethane (PU) gasket. Working pressure: 16 bar (up to 25 bar for DN25). Operating temperature: from -20°C to +65°C (from -30°C to +70°C for LPG).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsScrewed end fitting type S3 with external NPT thread (seal on the thread), made according to standard EN 14424, intended for rubber hoses and certain types of thermoplastic hoses, with soft textile reinforcement (without wire spiral). Commonly used in the fuel sector in fuel and gas distribution lines (e.g., LPG). Basic version made entirely of brass; also available in a stainless steel version (end fitting) with a chrome-plated brass sleeve. Material: brass (B). Working pressure: 16 bar (up to 25 bar for DN25). Operating temperature: from -20°C to +65°C (from -30°C to +70°C - for LPG).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThreaded bushing with a control hole, manufactured according to standard EN 14424, intended for a screwed fuel nozzle. Thread type: metric. Material: brass or chrome-plated brass.
