Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose with calibrated outer diameter, intended for pneumatic, hydraulic, oil, fuel, lubrication, and chemical installations. Compliant with DIN 73378 standard. Available in colors: natural, blue. Hose material: polyamide PA 12 (nylon). Working pressure: from 11 bar to 40 bar, depending on the diameter and wall thickness of the hose. Operating temperature: from -10°C to +80°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery flexible, abrasion-resistant, crack-resistant, and kink-resistant spiral hose designed for pneumatic installations in automotive braking systems. Resistant to oil, gasoline, ozone, and UV radiation. Maintains high flexibility at low temperatures. Finished on both ends with external metric threaded fittings. The stated total length is the maximum length of the hose when stretched. Available in yellow and red. Hose material: polyurethane. Spring material: galvanized steel. Maximum working pressure: 10 bar. Operating temperature: from -40°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnection set for the SYNTESI system type SY1 or SY2. The set includes a coupling and 4 screws.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket coupling with internal thread type C2 designed for connecting hoses made of soft plastics. The connection is made by pushing the hose onto the fitting and tightening it by screwing on the nut. Material: nickel-plated brass. Working pressure: 18 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight plug connector with plug connections for hoses with metric diameter, series S, type PUCM. Economic solution for connecting flexible pneumatic hoses with calibrated external metric diameter. Easy and quick to use. Material: plastic. Working pressure: 10 bar. Vacuum: 0.99 bar. Operating temperature: from 0°C to +60°C. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / Details22 mm coil for PIV.I valves, shaft O8. Insulation class: F155. Voltage tolerance: -10% to +10%. Protection degree: IP65 EN60529 with connector. Compliant with ATEX 94/9 CE, group II, category 3GD.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsClosing screw with external BSP thread type A7 with hexagon socket head. Material: nickel-plated brass. Working pressure: 60 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsExternal threaded fitting for the SPEEDFIT system used in compressed air installations. The installation can be made using plastic or metal pipes (copper, brass, aluminum). By pushing the fitting into the coupling, we obtain the possibility of connecting to the installation with an internal thread. Material: plastic. Working pressure: 10 bar (+23°C), 7 bar (+70°C). Operating temperature: from -20°C to +70°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMini double-acting cylinder ISO 6432 STD, type 112 with magnet, without cushioning. It is designed to operate with filtered oil-lubricated or non-oil-lubricated air and does not require additional maintenance activities. The cylinder is made with a stainless steel sleeve. The dimensions of the outer covers for certain diameters have been reduced, allowing for the installation of cylinders in constrained and limited spaces. The lifespan of cylinders with NBR seals is 15 million cycles, with polyurethane seals 30 million cycles. The presented values should not be considered binding or guaranteed, but only as a reference due to the variability of many factors, including radial and axial loads, speed, temperature, or air losses (limit values). Piston diameter: Ø 8, 10, 12, 16, 20, and 25 mm. Stroke length: from 5 to 500 mm. Operating pressure: from 0.8 to 10 bar (Ø 8, 10, 12 mm); from 0.6 to 10 bar (Ø 16, 20, 25 mm). Sealing: polyurethane, NBR, FKM/FPM. Operating temperature: from -10°C to +150°C depending on the seal used.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsReduction nipple made of stainless steel type 62020 with external BSPT thread. Material: AISI 316L steel. Operating temperature: from -20°C to +225°C. Working pressure: 140 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSpare blade for scissors PZG28 (ZC-PZG28).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDouble BANJO screw with washer type D8 for couplings type R13, R14, D12, D17, D5, D6. Material: nickel-plated brass. Working pressure: 18 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsT-type inline plug connector, type R5, designed for connecting wires and other components in pneumatic systems. Easy and quick to use for multiple assemblies without loss of sealing on the mechanical and pneumatic sides. Material: nickel-plated brass. Working pressure: 16 bar. Working medium: vacuum, air. Operating temperature: from -20°C to +80°C. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose with excellent temperature resistance and strength under elevated pressure made from a special, non-flammable polymer. It has a calibrated outer diameter. The material is resistant to aging and UV radiation, exhibiting good sliding properties which counteract material wear. The material is impermeable to gases, resistant to most concentrated bases and inorganic, organic acids, alcohols, and solvents at elevated temperatures. It has electro-insulating properties. The calibrated outer diameter allows for connection with plugs or fittings from leading manufacturers. Dimensional accuracy ensures consistent compressive strength even for hoses with larger diameters, making it suitable for a wider range of practical applications. Hose material: polyvinylidene fluoride PVDF. Working pressure: from 16 bar to 80 bar (depending on hose diameter). Operating temperature: from -50°C to +140°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPolyurethane spiral hose designed for pneumatic control systems, hand tools, industrial robots, etc. Resistant to abrasion, rupture, and kinking, successfully used in the automotive industry as well. Its high flexibility is maintained even after many years of use. Finished on both ends with straight sections of 100 mm and 500 mm and external BSPT threaded ends (without springs for an outer diameter of 16 mm). The stated total length is the maximum length of the hose when stretched. Hose material: blue polyurethane PUR. Working pressure: up to 17 bar (depending on hose diameter). Operating temperature: from -40°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsV3V L type shut-off valve, two-position three-way, with pneumatic system venting, in a version finished with plug-in couplings on both sides (pipe - pipe). Working pressure: 10 bar. Operating temperature: from -20°C to +60°C. Medium: filtered compressed air, oiled or non-oiled.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsEnd plate set for the SKILLAIR system, series 100, 200, 300 or 400.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsB4 type bulkhead fitting with a cutting ring designed for connecting copper pipes and plastic hoses. When connecting to hoses, the use of reinforcing sleeves (B12) is recommended. Material: nickel-plated brass. Working pressure: 60 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° angled socket coupling type C6 designed for connecting hoses made of soft plastics. The connection is made by fitting the hose onto the end and tightening it by screwing on the nut. Material: nickel-plated brass. Working pressure: 18 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight fitting, series F type R 4 NSF. Designed for the food industry (e.g., for cold or hot drinking water). No plastic components, nickel-coated through a special chemical process, and seals made of Viton provide high resistance to detergents and other chemicals. Also suitable for various applications in the chemical, pharmaceutical, electronic industries, and in medicine. Operating temperature: from -20°C to +150°C. Working pressure: 16 bar. Vacuum: 0.99 bar. Material: nickel-plated brass. Seal: Viton (approved for food contact by FDA). Standards: NSF/ANSI 51, NSF/ANSI 61.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality straight connector, made entirely of AISI 316L steel, series 60040. No plastic components, and seals made of Viton ensure high resistance to corrosive agents and chemicals. Used in the chemical, food, pharmaceutical, electronic industries, and in medicine. Material: AISI 316L steel. Operating temperature: from -15°C to +225°C. Working pressure: 15 bar. Vacuum: 0.99 bar. Seal: Viton.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdaptor enabling the connection of a pressure gauge with a 1/8" thread to a 1/4" coupling, o-ring. Material: carbon steel. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMounting strip for pneumatic hoses. Facilitates and accelerates the construction of installations, reduces installation space, increases resistance to vibrations. Color: blue.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMini double-acting cylinder ISO 6432 STD, type 113, has been designed to operate with filtered oil-lubricated or non-oil-lubricated air and does not require additional maintenance. The cylinder is made with a stainless steel sleeve. The dimensions of the external covers for certain diameters have been reduced, allowing for the installation of cylinders in confined and restricted spaces. The lifespan of cylinders with NBR seals is 15 million cycles, with polyurethane seals 30 million cycles. The presented values should not be considered binding or guaranteed, but merely as a reference due to the variability of many factors, including radial and axial loads, speed, temperature, or air losses (limit values). Piston diameter: Ø 16, 20, and 25 mm. Stroke length: from 10 to 500 mm. Operating pressure: from 0.6 to 10 bar. Sealing: polyurethane, NBR. Operating temperature: from -10°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsExternal cylindrical threaded nipple type A1, intended for connecting pneumatic components (including hoses) together. The tightness of the connection usually requires the use of additional seals. In the case of tapered threads, Teflon tape or sealant is used; for cylindrical threads, aluminum or copper washers are used. Material: nickel-plated brass. Working pressure: 60 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDouble BANJO screw with washer and internal thread type D10 for couplings type R13, R14, D12, D17, D5, D6. Material: nickel-plated brass. Working pressure: 18 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMWSC silencer with external thread used in compressed air systems to reduce noise levels. The noise reduction achievable through the installation of the silencer, measured at a supply pressure of 5 bar, at a distance of 1m and at an angle of 45° from the axis of the silencer, averages 35 dB depending on the size. Material: nickel-plated brass, nickel-plated sintered bronze. Operating temperature: from -10°C to +80°C. Working pressure: up to 12 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRotary elbow, screw-in with external cylindrical thread, series F type R 32 NSF. Designed for the food industry (e.g., for cold or hot drinking water). No plastic components, coated with nickel in a special chemical process, and seals made of Viton ensure high resistance to detergents and other chemicals. Also suitable for various applications in the chemical, pharmaceutical, electronic industries, and in medicine. Operating temperature: from -20°C to +150°C. Working pressure: 16 bar. Vacuum: 0.99 bar. Material: nickel-plated brass. Seal: Viton (approved for food contact by FDA). Standards: NSF/ANSI 51, NSF/ANSI 61.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStainless steel tee type 62400 with internal BSP thread. Material: AISI 316L steel. Operating temperature: from -20°C to +225°C. Working pressure: 140 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, highly flexible hose used in systems where frequent contact with water occurs (high resistance to microorganisms and hydrolysis), detergents, and solvents. Maintains high flexibility at low temperatures, resistant to abrasion and kinking. Calibrated outer diameter allows compatibility with plug couplings. Shore hardness (A): 98°. Complies with FDA requirements. Available in natural, black, blue, green, and red colors. Hose material: polyether-polyurethane. Working pressure: from 16 bar to 24 bar, depending on hose diameter. Operating temperature: from -40°C to +85°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery flexible spiral hose over a wide temperature range, resistant to abrasion, welding sparks, and hot metal chips. Designed for pneumatic control systems, hand tools, industrial robots, etc. Resistant to UV radiation and aging. Finished on both ends with straight sections of 100 mm and 500 mm and external BSPT threaded ends. Shore hardness (A) 98°. The stated total length is the maximum length of the hose when stretched. Hose material: flame-retardant polyurethane PUR. Working pressure: up to 13 bar (depending on hose diameter). Operating temperature: from -40°C to +70°C. Standards: UL 94 VO (outer layer). Color black.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRFL L type B throttling-check valve (threaded connection with O-ring on one side and plug connection on the other side) regulates the flow of air passing in both directions. Working pressure: 10 bar. Operating temperature: from -20°C to +60°C. Medium: filtered compressed air, oiled or non-oiled.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° angle fitting type B6 with a locking ring designed for connecting copper pipes and plastic hoses. When connecting to hoses, the use of reinforcing sleeves (B12) is recommended. Material: nickel-plated brass. Working pressure: 60 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsC4 type bulkhead socket coupling designed for connecting hoses made of soft plastics. The connection is made by pushing the hose onto the fitting and tightening it by screwing on the nut. Material: nickel-plated brass. Working pressure: 18 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality straight bulkhead connector, made entirely of AISI 316L steel, series 60050. No plastic components, and seals made of Viton ensure high resistance to corrosive agents and chemicals. Used in the chemical, food, pharmaceutical, electronic industries, and in medicine. Material: AISI 316L steel. Operating temperature: from -15°C to +225°C. Working pressure: 15 bar. Vacuum: 0.99 bar. Seal: Viton.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight plug connector, type R19, intended for connecting wires and other components in pneumatic systems. Easy and quick to use for multiple assemblies without loss of sealing on the mechanical and pneumatic sides. Material: plastic. Working pressure: 12 bar. Working medium: vacuum, air. Operating temperature: from -20°C to +60°C. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsExternal threaded fitting for the SPEEDFIT system used in compressed air installations. The installation can be made using plastic or metal pipes (copper, brass, aluminum). Material: brass. Working pressure: 10 bar (+23°C), 7 bar (+70°C). Operating temperature: from -20°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / Details2-position adapter VME1-000 intended for VME mini valves or valves mounted on the control panel from the 70 series.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSpare blade for cutter TC15 (SH-TC15).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBANJO screw with washers with internal thread type D9 for couplings type R13, R14, D12, D17, D5, D6. Material: nickel-plated brass. Working pressure: 18 bar.
