Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality straight plug connection with external parallel thread (BSP or M5), made entirely of AISI 316L steel, series 60000. No plastic components, and seals made of Viton ensure high resistance to corrosive agents and chemicals. Used in the chemical, food, pharmaceutical, electronic industries, and in medicine. Material: AISI 316L steel. Operating temperature: from -15°C to +225°C. Working pressure: 15 bar. Vacuum: 0.99 bar. Seal: Viton.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight through plug connector for connecting plastic hoses (for polyurethane hoses, a minimum hardness according to Shore (A) 98° is required). Material: nickel-plated brass. Operating temperature: from -15°C to +130°C. Working pressure: 30 bar. Sealing: viton.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight connector, series F type R 3 NSF. Designed for the food industry (e.g., for cold or hot drinking water). No plastic components, nickel-coated through a special chemical process, and seals made of Viton ensure high resistance to detergents and other chemicals. Also suitable for various applications in the chemical, pharmaceutical, electronic industries, and in medicine. Operating temperature: from -20°C to +150°C. Working pressure: 16 bar. Vacuum: 0.99 bar. Material: nickel-plated brass. Seal: Viton (approved for food contact by the FDA). Standards: NSF/ANSI 51, NSF/ANSI 61.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBSPT type A2 external threaded nipple, intended for connecting pneumatic components (including hoses) together. The tightness of the connection usually requires the use of additional seals. In the case of tapered threads, Teflon tape or sealant is used; for cylindrical threads, aluminum or copper washers are used. Material: nickel-plated brass. Working pressure: 60 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAluminum washer type D11 recommended for sealing threaded connections type A and BANJO connections series D. The washer for M5 thread is made of polyamide.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStainless steel reducing adapter type 62040 with external BSPT thread and internal BSP thread. Material: AISI 316L steel. Operating temperature: from -20°C to +225°C. Working pressure: 140 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMWSFE silencer with external thread used in compressed air systems to reduce noise levels. The noise reduction achievable through the installation of the silencer, measured at a supply pressure of 5 bar, at a distance of 1m and at an angle of 90° (to avoid direct flow) from the axis of the silencer, averages 30 dB depending on the size. Material: nickel-plated brass, nickel-plated sintered bronze. Operating temperature: from -10°C to +80°C. Working pressure: 12 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsType C9 tee fitting designed for connecting hoses made of soft plastics. The connection is made by pushing the hose onto the fitting and tightening it by screwing on the nut. Material: nickel-plated brass. Working pressure: 18 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHighly flexible and elastic polyurethane hose, featuring optimal mechanical properties and very high compressive strength over a wide temperature range. Calibrated outer diameter and wall thickness allow for the use of easy-to-use plug couplings from leading manufacturers. Resistant to abrasion, solvents, fuels, and hydrocarbons. Widely used in both pneumatic and hydraulic systems, in industrial robotics, and tool lines. Shore hardness (A): 90°. Available in natural, black, blue, green, red, and yellow colors. Hose material: PUR polyurethane. Working pressure: from 9 bar to 14.3 bar, depending on hose diameter. Operating temperature: from -40°C to +85°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery flexible, abrasion-resistant, tear-resistant, and kink-resistant spiral reinforced hose specifically designed for automotive workshops, for pneumatic control systems, hand tools, industrial robots, etc. Finished on both ends with straight sections of 100 mm and 500 mm in length and external BSPT threaded ends. Shore hardness (A) 98°. The stated total length is the maximum length of the hose when stretched. Hose material: blue polyurethane PUR. Working pressure: up to 15 bar. Operating temperature: from -40°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMounting bracket (angle bracket) intended for systems: SKILLAR series 100, BIT, SYNTESI, and NEW DEAL.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRFL L type B throttling and check valve (plug-in connection at the inlet and outlet of the valve) regulates the flow of air in both directions. Working pressure: 10 bar. Operating temperature: from -20°C to +60°C. Medium: filtered compressed air, oiled or non-oiled.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight connector for the SPEEDFIT system used in compressed air installations. The installation can be made using plastic or metal pipes (copper, brass, aluminum). Material: plastic. Working pressure: 10 bar (+23°C), 7 bar (+70°C). Operating temperature: from -20°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight coupling type B3 with a locking ring designed for connecting copper pipes and plastic hoses. When connecting to hoses, the use of reinforcing sleeves (B12) is recommended. Material: nickel-plated brass. Working pressure: 60 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRotary elbow, screw-in with external BSPT tapered thread, series F type R 31C NSF. Designed for the food industry (e.g., for cold or hot drinking water). No plastic components, nickel-plated coating through a special chemical process, and Viton seals ensure high resistance to detergents and other chemicals. Also suitable for various applications in the chemical, pharmaceutical, electronic industries, and in medicine. Operating temperature: from -20°C to +150°C. Working pressure: 16 bar. Vacuum: 0.99 bar. Material: nickel-plated brass. Seal: Viton (approved for food contact by FDA). Standards: NSF/ANSI 51, NSF/ANSI 61.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight through plug connector, type R3, designed for connecting wires and other components in pneumatic systems. Easy and quick to use for multiple assemblies without loss of sealing on the mechanical and pneumatic sides. Material: nickel-plated brass. Working pressure: 16 bar. Working medium: vacuum, air. Operating temperature: from -20°C to +80°C. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality straight plug connection with external BSPT thread, made entirely of AISI 316L steel, series 60000. No plastic components, and seals made of Viton ensure high resistance to corrosive agents and chemicals. Used in the chemical, food, pharmaceutical, electronic industries, and in medicine. Material: AISI 316L steel. Operating temperature: from -15°C to +225°C. Working pressure: 15 bar. Vacuum: 0.99 bar. Seal: Viton.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsExternal BSPT thread/internal BSP type A4 thread adapter, intended for connecting pneumatic components (including hoses) together. The tightness of the connection usually requires the use of additional seals. In the case of tapered threads, Teflon tape or sealant is used; for cylindrical threads, aluminum or copper washers are used. Material: nickel-plated brass. Working pressure: 60 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAngle body of BANJO coupling with locking ring type D17. Through bolts for the body: D7, D8, D9, D10. Material: nickel-plated brass. Working pressure: 18 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsReduction coupling made of stainless steel type 62310 with internal BSP thread. Material: AISI 316L steel. Operating temperature: from -20°C to +225°C. Working pressure: 140 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsScrewed "T" fitting, type B9, with a locking ring intended for connecting copper pipes and plastic hoses. When connecting to hoses, the use of reinforcing sleeves (B12) is recommended. Material: nickel-plated brass. Working pressure: 60 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality "T" branch coupling, made entirely of AISI 316L steel, series 60230. No plastic components, and seals made of Viton ensure high resistance to corrosive agents and chemicals. Used in the chemical, food, pharmaceutical, electronic industries, and in medicine. Material: AISI 316L steel. Operating temperature: from -15°C to +225°C. Working pressure: 15 bar. Vacuum: 0.99 bar. Seal: Viton.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose intended for air, water, and other media. Resistant to chemicals, physiologically safe, tasteless. Meets BGA and FDA requirements. Available in natural, black, and blue colors. Hose material: LDPE polyethylene. Working pressure: from 5 bar to 17 bar, depending on the hose diameter. Operating temperature: from -30°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose - spiral nylon polyamide tube intended for all types of pneumatic devices, control systems, etc. Finished on both ends with a straight section of 100 mm in length and external BSPT threaded fittings. The stated total length is the maximum length of the hose when stretched. Hose material: blue polyamide PA 12 (nylon). Working pressure: up to 28 bar (depending on hose diameter). Operating temperature: from -40°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsElectric plug for coils 22 mm, hose diameter: PG9. Color: black or transparent.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsV2V L type shut-off valve, two-position, two-way, with both ends terminated with plug connections (hose - hose). Working pressure: 10 bar. Operating temperature: from -20°C to +60°C. Medium: filtered compressed air, oiled or non-oiled.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnector with external thread and protective spring designed for hoses made of soft plastics. Material: nickel-plated brass. Working pressure: 18 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight socket coupling type C3 designed for connecting hoses made of soft plastics. The connection is made by pushing the hose onto the fitting and tightening it by screwing on the nut. Material: nickel-plated brass. Working pressure: 18 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° angled connector with external BSP thread, series S, type PLM. Economic solution for connecting flexible pneumatic hoses with a calibrated metric outer diameter. Easy and quick to use. Material: plastic. Working pressure: 10 bar. Vacuum: 0.99 bar. Operating temperature: from 0°C to +60°C. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight connection with external tapered BSPT thread, series F type R 1C NSF. Designed for the food industry (e.g., for cold or hot drinking water). No plastic components, nickel plating through a special chemical process, and Viton seals ensure high resistance to detergents and other chemicals. Also suitable for various applications in the chemical, pharmaceutical, electronic industries, and in medicine. Operating temperature: from -20°C to +150°C. Working pressure: 16 bar. Vacuum: 0.99 bar. Material: nickel-plated brass. Seal: Viton (approved for food contact by the FDA). Standards: NSF/ANSI 51, NSF/ANSI 61.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsExternal threaded fitting for the SPEEDFIT system used in compressed air installations. The installation can be made using plastic or metal pipes (copper, brass, aluminum). Material: plastic. Working pressure: 10 bar (+23°C), 7 bar (+70°C). Operating temperature: from -20°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° elbow made of stainless steel type 62520 with internal BSP thread and external BSPT thread. Material: AISI 316L steel. Operating temperature: from -20°C to +225°C. Working pressure: 140 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsElbow with external BSPT thread and internal BSP type A10 thread intended for connecting pneumatic components (including hoses) together. The tightness of the connection usually requires the use of additional seals. For tapered threads, Teflon tape or sealant is used; for cylindrical threads, aluminum or copper washers are used. Material: nickel-plated brass. Working pressure: 60 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsExternal threaded fitting for the SPEEDFIT system used in compressed air installations. The installation can be made using plastic or metal pipes (copper, brass, aluminum). By pushing the fitting into the coupling, we obtain the ability to connect to the installation with an external thread. Material: brass. Working pressure: 10 bar (+23°C), 7 bar (+70°C). Operating temperature: from -20°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMiniature RML type pressure reducing valve (plug-in connection at the inlet and outlet of the valve) designed to reduce higher pressure to lower pressure downstream of the valve. Output pressure range: 1 ÷ 8 bar. Working pressure: 10 bar. Operating temperature: from -20°C to +60°C. Medium: filtered compressed air, oiled or non-oiled.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlastic hose cutter for diameters ranging from 3 to 12 mm. Color: orange.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsB11 locking ring for connecting copper pipes and plastic hoses to type B fittings. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBANJO screw with O-rings type D7 for couplings type R28, R29. Material: nickel-plated brass. Working pressure: 18 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality "T" branch connection with external BSPT thread, made entirely of AISI 316L steel, series 60210. No plastic components, and seals made of Viton ensure high resistance to corrosive agents and chemicals. Used in the chemical, food, pharmaceutical, electronic industries, and in medicine. Material: AISI 316L steel. Operating temperature: from -15°C to +225°C. Working pressure: 15 bar. Vacuum: 0.99 bar. Seal: Viton.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlow tee, series F type R 5 NSF. Designed for the food industry (e.g., for cold or hot drinking water). No plastic components, nickel-coated through a special chemical process, and seals made of Viton ensure high resistance to detergents and other chemicals. Also suitable for various applications in the chemical, pharmaceutical, electronic industries, and in medicine. Operating temperature: from -20°C to +150°C. Working pressure: 16 bar. Vacuum: 0.99 bar. Material: nickel-plated brass. Seal: Viton (approved for food contact by the FDA). Standards: NSF/ANSI 51, NSF/ANSI 61.
