Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsY-branch with internal BSP threads type A23, intended for connecting pneumatic components (including hoses) together. The tightness of the connection usually requires the use of additional seals. In the case of tapered threads, Teflon tape or sealant is needed; for cylindrical threads, aluminum or copper washers are required. Material: nickel-plated brass. Working pressure: 60 bar.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMounting bracket for pipes in the SPEEDFIT system. Material: plastic.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for air, water, and other media. Characterized by flame resistance and resistance to welding sparks and hot metal shavings. Resistant to hydrolysis, biological corrosion, UV radiation, solvents, and detergents. Withstands a vacuum of 0.9 bar. Calibrated outer diameter allows compatibility with plug couplings. Hose material: flame-retardant polyurethane PUR. Working pressure: 20 bar. Operating temperature: from -35°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFilter insert for the SYNTESI system type SY1 or SY2. Available in colors: yellow, white, and blue for easier identification.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVNR L type check valve in a version with plug-in connections on both ends (pipe - pipe), with holes for wall mounting. Working pressure: 12 bar. Sealing: NBR. Operating temperature: from -20°C to +60°C. Medium: filtered compressed air, oiled or non-oiled.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBSP type B2 internal threaded connection with a locking ring designed for connecting copper pipes and plastic hoses. When connecting to hoses, the use of reinforcing sleeves (B12) is recommended. Material: nickel-plated brass. Working pressure: 60 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket coupling with external thread type C1/C designed for connecting hoses made of soft plastics. The connection is made by pushing the hose onto the fitting and tightening it by screwing on the nut. Material: nickel-plated brass. Working pressure: 18 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight reducing connector with plug-in connections for hoses with metric diameter, series S, type PUCM. Economic solution for connecting flexible pneumatic hoses with calibrated external metric diameter. Easy and quick to use. Material: plastic. Working pressure: 10 bar. Vacuum: 0.99 bar. Operating temperature: from 0°C to +60°C. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight connection with internal thread, series F type R 2 NSF. Designed for the food industry (e.g., for cold or hot drinking water). No plastic components, nickel-coated through a special chemical process, and seals made of Viton ensure high resistance to detergents and other chemicals. Also suitable for various applications in the chemical, pharmaceutical, electronic industries, and in medicine. Operating temperature: from -20°C to +150°C. Working pressure: 16 bar. Vacuum: 0.99 bar. Material: nickel-plated brass. Seal: Viton (approved for food contact by FDA). Standards: NSF/ANSI 51, NSF/ANSI 61.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsExternal BSPT thread adaptor and internal BSP thread type A5, intended for connecting pneumatic components (including hoses) together. The tightness of the connection usually requires the use of additional seals. In the case of tapered threads, Teflon tape or sealant is used; for cylindrical threads, aluminum or copper washers are used. Material: nickel-plated brass. Working pressure: 60 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHexagonal plug made of stainless steel type 62320 with external BSP thread. Material: AISI 316L steel. Operating temperature: from -20°C to +225°C. Working pressure: 140 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMounting rail for pneumatic hoses. Facilitates and accelerates the construction of installations, reduces installation space, increases resistance to vibrations. Operating temperature: from 0°C to +40°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPressure gauge with rear connection and external BSP thread, type GS40, is used for pressure measurement. The measurement range should be selected appropriately to the working pressure so that it does not exceed 75% of the maximum range (0 ÷ 10 bar). Operating temperature: from -20°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlastic air distribution box for the SPEEDFIT system with 5x1/2″ BSP threads used in compressed air installations. The set includes three 1/2″ plugs. The installation can be made using plastic or metal pipes (copper, brass, aluminum) with outer diameters from 12 mm to 28 mm. Material: plastic. Working pressure: 10 bar (+23°C), 7 bar (+70°C). Operating temperature: from -20°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight coupling with external thread and spigot, series F type R 6 NSF. Designed for the food industry (e.g., for cold or hot drinking water). No plastic components, nickel-coated through a special chemical process, and seals made of Viton ensure high resistance to detergents and other chemicals. Also suitable for various applications in the chemical, pharmaceutical, electronic industries, and in medicine. Operating temperature: from -20°C to +150°C. Working pressure: 16 bar. Vacuum: 0.99 bar. Material: nickel-plated brass. Seal: Viton (approved for food contact by the FDA). Standards: NSF/ANSI 51, NSF/ANSI 61.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDouble-acting short-stroke actuator with a retracted piston rod and magnet. The SSCY series is characterized by a compact design and is intended for installation in confined spaces. The operational lifespan of actuators without transverse load with NBR seals is 15 million cycles, and with polyurethane seals, it is 30 million cycles. Due to the variability of many factors affecting lifespan, the presented values should not be considered binding or guaranteed, but only as a reference. Available piston diameters: Ø 12 ÷ 80 mm. Working stroke: from 5 to 120 mm. Seal material of the actuator: NBR or polyurethane. Operating pressure: from 0.4 to 10 bar - depending on the piston diameter. Operating temperature: from -10°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMuffler with MWSVE throttle and external thread used in compressed air systems to reduce noise levels. The noise reduction achievable by installing the muffler, measured at a supply pressure of 5 bar, at a distance of 1m and at an angle of 45° from the axis of the muffler, averages 25 dB depending on the size. Material: nickel-plated brass, nickel-plated sintered bronze. Spring material: stainless steel. Operating temperature: from -10°C to +80°C. Working pressure: 12 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTee fitting "T" with external BSPT thread type B7 with a locking ring designed for connecting copper pipes and plastic hoses. When connecting to hoses, the use of reinforcing sleeves (B12) is recommended. Material: nickel-plated brass. Working pressure: 60 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsT-shaped "T" fitting with external BSPT thread type C7 designed for connecting hoses made of soft plastics. The connection is made by pushing the hose onto the end and tightening it by screwing on the nut. Material: nickel-plated brass. Working pressure: 18 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose with calibrated outer diameter, intended for pneumatic, hydraulic, oil, fuel, lubrication, and chemical installations. Hose material: polyamide PA 6 (nylon). Working pressure: from 11 bar to 40 bar (depending on hose diameter). Operating temperature: from -10°C to +80°C. Standard: DIN 73378.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight plug connector with internal thread, type R2, intended for connecting wires and other components in pneumatic systems. Easy and quick to use for multiple assemblies without loss of sealing on the mechanical and pneumatic sides. Material: nickel-plated brass. Working pressure: 16 bar. Working medium: vacuum, air. Operating temperature: from -20°C to +80°C. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter with external and internal BSP thread type A4/Z, intended for connecting pneumatic components (including hoses) together. The tightness of the connection usually requires the use of additional seals. In the case of a tapered thread, Teflon tape or sealant is used; for a cylindrical thread, aluminum or copper washers are required. Material: nickel-plated brass. Working pressure: 60 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / Details30 mm coil for PIV.B valves. Insulation class: F180. Voltage tolerance: -10% to +15%. Protection degree: IP65 EN60529 with coupling.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMicro-actuators of single-acting design (with retracted piston rod) intended for installation in confined spaces. It features a sealing ring (o-ring), allowing direct mounting in the machine body. Oil-free operation is possible. Important! When the actuator operates at high frequency, it is advisable that the piston does not reach the end position. Material: nickel-plated brass (body), AISI 303 steel (piston for Ø6 - Ø10), brass (piston for Ø16), nickel-plated steel (nut), spring steel (spring), brass (plain bearing). Operating pressure: 2÷6 bar. Operating temperature: from -10°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNut for screw couplings with locking ring series B. Material: nickel-plated brass.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug connector T-branch with plug connections for hoses with metric diameter, series S, type PUTM. Economic solution for connecting flexible pneumatic hoses with calibrated metric outer diameter. Easy and quick to use. Material: plastic. Working pressure: 10 bar. Vacuum: 0.99 bar. Operating temperature: from 0°C to +60°C. Sealing: NBR.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose with calibrated outer diameter, specifically designed for automotive pneumatic brake system installations. It contains no plasticizers, does not stiffen, and is resistant to UV radiation. Available only in black. Standard: ISO 7628:2010 (category 1). Hose material: thermoplastic elastomer (TPE) based on polyester. Working pressure: 10 bar. Operating temperature: from -40°C to +100°C (for water-based media +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnection set for the SKILLAIR system, series 100, 200, 300, or 400.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnector with MAN L pressure gauge in a version finished with plug connectors on both sides (hose - hose). The pressure gauge housed in a metal shield ensures accurate readings despite its small size. It can be oriented in any direction by manual rotation. Working pressure: 12 bar. Operating temperature: from -20°C to +60°C. Medium: filtered compressed air, oiled or un-oiled.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRotary connector with external thread and protective spring for hoses made of soft plastics. Material: nickel-plated brass. Working pressure: 18 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsReduction fitting for the SPEEDFIT system used in compressed air installations. The installation can be made using plastic or metal pipes (copper, brass, aluminum). Material: plastic. Working pressure: 10 bar (+23°C), 7 bar (+70°C). Operating temperature: from -20°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° angled socket coupling with internal thread type C5/F designed for connecting hoses made of soft plastics. The connection is made by pushing the hose onto the fitting and tightening it by screwing on the nut. Material: nickel-plated brass. Working pressure: 18 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsInternal thread adaptor BSP type A6, intended for connecting pneumatic components (including hoses) together. The tightness of the connection usually requires the use of additional seals. In the case of a tapered thread, Teflon tape or sealant is used; for a cylindrical thread, aluminum or copper washers are required. Material: nickel-plated brass. Working pressure: 60 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAir distribution box for the SPEEDFIT system. The package includes two 1/2″ plugs. Material: aluminum. Working pressure: 10 bar (+23°C), 7 bar (+70°C). Operating temperature: from -20°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDynamic silencer MWSPL with external thread used in compressed air systems to reduce noise levels. The noise reduction achievable by installing the silencer, measured at a supply pressure of 5 bar, at a distance of 1m and at an angle of 45° from the axis of the silencer, averages 30 dB depending on the size. Material: black acetal resin, acoustic insulation. Operating temperature: from -10°C to +60°C. Working pressure: 6 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsL-shaped tee coupling with external BSPT thread type B8 with a locking ring designed for connecting copper pipes and plastic hoses. When connecting to hoses, the use of reinforcing sleeves (B12) is recommended. Material: nickel-plated brass. Working pressure: 60 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsL-shaped tee with external BSPT thread type C8 designed for connecting hoses made of soft plastics. The connection is made by pushing the hose onto the fitting and tightening it by screwing on the nut. Material: nickel-plated brass. Working pressure: 18 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, highly flexible hose for air, gases, water, and other media. Used in systems where there is a risk of electric charge accumulation and in explosion hazard zones. Compliant with the ATEX directive (2014/34/EU). Surface resistance R < 106 Ω. Resistant to hydrolysis, microorganisms, abrasion, and UV radiation. Calibrated outer diameter allows compatibility with plug couplings. Recommended for applications in the electronics industry, powder coating, explosion hazard zones, mining, conveyors, and part sorters. Working pressures are stated with a safety factor of 2:1 relative to the maximum pressure that does not cause hose damage. Hose material: antistatic polyurethane PUR. Working pressure: from 9 bar to 16 bar (depending on hose diameter). Operating temperature: from -30°C to +80°C. Vacuum: up to 0.95 bar (when under vacuum, the bending radius should be increased by 20%).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFilter element "F" and "FR" for the NEW DEAL series.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsV3V L type shut-off valve, two-position three-way, with pneumatic system venting, in a version with a threaded connection with an O-ring on one side and a plug-in connection on the other side (thread - hose). Working pressure: 10 bar. Operating temperature: from -20°C to +60°C. Medium: filtered compressed air, oiled or non-oiled.
