Our products
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSTOP shut-off valve series STP-U with a check valve and plug-in connection, primarily used as a safety valve. When installed on the actuator's supply connections, it allows airflow only in the presence of a pneumatic control signal. The actuator is stopped after a drop in control pressure. Operating pressure: 0.5 ÷ 10 bar. Operating temperature: from -10°C to +60°C. Body material: nickel-plated brass. Sealing: NBR.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal mechanical control distribution valve, lever with roller, commonly used for controlling actuator operation. Can be mounted in any position. Function 3/2 - three-way, two-position. Size: 1/8". Material: valve body - aluminum, slider - nickel-plated aluminum, sealing - NBR, end cover - plastic. Working pressure: up to 10 bar. Operating temperature: -10°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal dividing valve with mechanical control, spring rod assistance, commonly used for controlling actuator operation. Can be mounted in any position. Function 5/2 - five-way, two-position. Size: 1/8". Material: valve body - aluminum, slider - nickel-plated aluminum, sealing - NBR, end cover - plastic. Working pressure: up to 10 bar. Operating temperature: -10°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe VOR series higher signal valve is designed to separate the higher value signal from two input signals. The input signals do not interact with each other. Operating pressure: 2 ÷ 10 bar. Operating temperature: from -10°C to +80°C. Body material: aluminum. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSimple foot valve with protective cover and front plane sockets, used for foot control by the operator of devices in pneumatic systems. Connection: M5, Ø4. Working pressure: from 2.5 bar to 10 bar. Operating temperature: -10°C to +60°C. Nominal flow: 95 l/min (at inlet pressure 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal mechanical control distribution valve, lever with roller, commonly used for controlling actuator operation. Can be mounted in any position. Function 5/2 - five-way, two-position. Size: 1/8". Material: valve body - aluminum, slider - nickel-plated aluminum, sealing - NBR, end cover - plastic. Working pressure: up to 10 bar. Operating temperature: -10°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPneumatically adjustable NAMUR valve, used for controlling pneumatic actuators. Its connection allows for direct mounting of valves on the actuator body. Function 5/2 - five-way, two-position. Material: valve body - aluminum, slider - nickel-plated aluminum, sealing - NBR, end cover - Hostaform®. Minimum pilot supply pressure: 2.5 bar. Operating temperature: -10°C to +60°C. Nominal flow: 1100 l/min (at inlet pressure 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMRF NTB type throttling valve series COMPACT "N" used for simultaneous flow regulation in both directions - during filling and venting, applied in pneumatic systems for regulating the flow rate of compressed air and flow direction. Equipped with a plug connection for easy disassembly of pneumatic hoses. Adjustment change via a control knob and/or screwdriver; possibility of securing the setting with a locking nut. Size: M5, 1/8″, 1/4″, 3/8″, 1/2″. Working pressure: up to 10 bar. Operating temperature: from -10°C to +50°C. Material: plastic.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThrottle-return valve type MRF OMV series COMPACT "O" for installation in the connections of distribution valves, used in pneumatic systems to regulate the flow rate of compressed air and the direction of flow. Equipped with a plug connection for easy disassembly of pneumatic hoses. Adjustment change using a screwdriver, with the possibility of mounting a protective cover. Size: M5, 1/8″, 1/4″, 3/8″, 1/2″. Working pressure: up to 10 bar. Operating temperature: from -10°C to +70°C. Material: nickel-plated brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSTOP shut-off valve series STP-BX with internal thread and plug connection used mainly as a safety valve. When installed on the actuator's supply connection, it allows airflow only in the presence of a pneumatic control signal. The actuator is stopped after a drop in control pressure. Operating pressure: 0.5 ÷ 10 bar. Operating temperature: from -10°C to +60°C. Body material: nickel-plated brass. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMRF N/C throttling and check valve for direct mounting in actuator connections, used in pneumatic systems for regulating the flow rate of compressed air and the direction of flow. Equipped with a plug-in coupling for easy disassembly of pneumatic hoses. Adjustment change via a control knob and/or screwdriver; possibility of securing the setting with a locking nut. The specified nominal flow at a pressure of 6.3 bar (in the throttled direction). Operating pressure: up to 10 bar. Operating temperature: from -10°C to +70°C. Body material: nickel-plated brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThrottle-return valve type MRF/C for direct mounting in actuator connections, used in pneumatic systems for regulating the flow rate of compressed air and the direction of flow. Equipped with a plug connection for easy disassembly of pneumatic hoses. Adjustment change using a screwdriver. The specified nominal flow at a pressure of 6.3 bar (in the throttled direction). Body material: nickel-plated brass. Working pressure: up to 10 bar. Operating temperature: from -10°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThrottle-return valve type MRF/V for installation in the connections of distribution valves, used in pneumatic systems to regulate the flow rate of compressed air and the direction of flow. Equipped with a plug-in coupling for easy disassembly of pneumatic hoses. Adjustment change using a screwdriver. The specified nominal flow at a pressure of 6.3 bar (in the throttled direction). Working pressure: up to 10 bar. Operating temperature: from -10°C to +70°C. Body material: nickel-plated brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThrottle-return valve type MRF PTC series PUSH-LOCK for direct mounting in actuator connections, used in pneumatic systems for regulating the flow rate of compressed air and the direction of flow. Equipped with a plug-in coupling for easy disassembly of pneumatic hoses. Adjustment change via a knob with PUSH-LOCK lock. Size: 1/8″, 1/4″. Working pressure: up to 10 bar. Operating temperature: from -10°C to +50°C. Material: plastic.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThrottle valve type MRF OMB series COMPACT "O" used for simultaneous flow regulation in both directions - during filling and venting, applied in pneumatic systems for regulating the flow rate of compressed air. Equipped with a plug-in connection for easy disassembly of pneumatic hoses. Adjustment change using a screwdriver, with the possibility of mounting a protective cover. Size: M5, 1/8″, 1/4″, 3/8″, 1/2″. Working pressure: up to 10 bar. Operating temperature: from -10°C to +70°C. Material: nickel-plated brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThrottle valve type MRF/B used for simultaneous flow regulation in both directions - during filling and venting, used in pneumatic systems to regulate the flow rate of compressed air. Equipped with a plug connection for easy disassembly of pneumatic hoses. Adjustment change using a screwdriver. The specified nominal flow at a pressure of 6.3 bar (in the throttled direction). Working pressure: up to 10 bar. Operating temperature: from -10°C to +70°C. Body material: nickel-plated brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMRF T/B type throttling valve used for simultaneous flow regulation in both directions - during filling and venting, applied in pneumatic systems to regulate the flow rate of compressed air. Equipped with a plug-in connection for easy disassembly of pneumatic hoses. Adjustment change using a screwdriver. The specified nominal flow at a pressure of 6.3 bar (in the throttled direction). Working pressure: up to 10 bar. Operating temperature: from -10°C to +70°C. Body material: plastic.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSimple, monostable foot valve without protective cover with ports in the front plane. This type of valve is used for foot control by the operator of devices in pneumatic systems. Connection: M5, Ø4. Working pressure: from 2.5 bar to 10 bar. Operating temperature: -10°C to +60°C. Nominal flow: 95 l/min (at an inlet pressure of 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal electric control distribution valve (solenoid valve), without control coil, most commonly used for controlling actuator operation. It can be mounted inline, to a wall, directly to actuators, or on a connection block. Function 3/2 - three-way, two-position. Material: valve body - aluminum, slider - nickel-plated aluminum, sealing - NBR, end cover - plastic. Operating pressure: up to 10 bar. Operating temperature: -10°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal electric control distribution valve (solenoid valve), with a control coil, for panel mounting. Panel mounting reduces the number of necessary wires, dampers, and connections, which lowers costs and increases reliability. This is an ideal solution wherever there is a need to replace the valve without the possibility of disconnecting the wires. The inlet, outlet, and vent are located on the connection plate. Function 5/2 - five-way, two-position. Material: valve body - aluminum, slider - nickel-plated aluminum, sealing - NBR, end cover - plastic. Operating pressure: up to 10 bar. Operating temperature: -10°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal mechanical control distribution valve, lever with pivot roller, most commonly used for controlling actuator operation. Can be mounted in any position. Function 3/2 - three-way, two-position. Size: 1/8". Material: valve body - aluminum, slider - nickel-plated aluminum, sealing - NBR, end cover - plastic. Working pressure: up to 10 bar. Operating temperature: -10°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal directional control valve with mechanical actuation, lever with pivot roller, commonly used for controlling actuator operation. Can be mounted in any position. Function 5/2 - five-way, two-position. Size: 1/8". Material: valve body - aluminum, slider - nickel-plated aluminum, sealing - NBR, end cover - plastic. Working pressure: up to 10 bar. Operating temperature: -10°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal dividing valve with mechanical control, lever with roller assistance, commonly used for controlling actuator operation. Can be mounted in any position. Function 5/2 - five-way, two-position. Size: 1/8". Material: valve body - aluminum, slider - nickel-plated aluminum, sealing - NBR, end cover - plastic. Working pressure: up to 10 bar. Operating temperature: -10°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal mechanical control distribution valve with a push rod assist, commonly used for controlling actuator operation. Can be mounted in any position. Function 3/2 - three-way, two-position. Size: 1/8". Material: valve body - aluminum, slider - nickel-plated aluminum, sealing - NBR, end cover - plastic. Working pressure: up to 10 bar. Operating temperature: -10°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal mechanical control distribution valve with actuator assistance, commonly used for controlling the operation of actuators. It can be mounted in any position. Function 5/2 - five-way, two-position. Size: 1/8". Material: valve body - aluminum, slider - nickel-plated aluminum, sealing - NBR, end cover - plastic. Working pressure: up to 10 bar. Operating temperature: -10°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal mechanical control distribution valve, operated by a push rod, commonly used for controlling actuator operation. Can be mounted in any position. Function 3/2 - three-way, two-position. Size: 1/8". Material: valve body - aluminum, slider - nickel-plated aluminum, sealing - NBR, end cover - plastic. Working pressure: up to 10 bar. Operating temperature: -10°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal mechanical control distribution valve, operated by a push rod, commonly used for controlling actuator operation. Can be mounted in any position. Function 5/2 - five-way, two-position. Size: 1/8". Material: valve body - aluminum, slider - nickel-plated aluminum, sealing - NBR, end cover - plastic. Working pressure: up to 10 bar. Operating temperature: -10°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal pneumatic control distribution valve, most commonly used for controlling the operation of actuators. It can be mounted inline, to a wall, directly to actuators, or on a connection block. Function 3/2 - three-way, two-position. Material: valve body - aluminum, slider - nickel-plated aluminum, sealing - NBR, end cover - plastic. Working pressure: up to 10 bar. Operating temperature: -10°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal pneumatic control distribution valve, most commonly used for controlling the operation of actuators. It can be mounted inline, to a wall, directly to actuators, or on a connection block. Function 5/3 - five-way, three-position. Material: valve body - aluminum, slider - nickel-plated aluminum, sealing - NBR, end cover - plastic. Working pressure: up to 10 bar. Operating temperature: -10°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal manual control distribution valve, operated by a selector, commonly used for controlling actuator operation. It can be mounted inline, to a wall, directly to actuators, or on a connection block. Function 3/2 - three-way, two-position. Size: 1/8". Material: valve body - aluminum, slider - nickel-plated aluminum, sealing - NBR, end cover - plastic. Operating pressure: up to 10 bar. Operating temperature: -10°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal manual control distribution valve, operated by a selector, commonly used for controlling actuator operation. It can be mounted inline, to a wall, directly to actuators, or on a connection block. Function 5/2 - five-way, two-position. Size: 1/8". Material: valve body - aluminum, slider - nickel-plated aluminum, sealing - NBR, end cover - plastic. Operating pressure: up to 10 bar. Operating temperature: -10°C to +60°C.
