Our products
Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal electric control dividing valve (solenoid valve), without control coil, commonly used for actuator control. It can be mounted inline, to a wall, directly to actuators, or on a connection block. Function 5/2 - five-way, two-position. Material: valve body - aluminum, slider - nickel-plated aluminum, sealing - NBR, end cover - plastic. Operating pressure: up to 10 bar. Operating temperature: -10°C to +60°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal manual control distribution valve with actuator assistance for panel control. Most commonly used for controlling actuator operation. An MW-035100005 adapter is always required during installation. Function 3/2 - three-way, two-position. Size: 1/8". Material: valve body - aluminum, slider - nickel-plated aluminum, sealing - NBR, end cover - plastic. Working pressure: up to 10 bar. Operating temperature: -10°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThrottle-return valve type MRF NMC series COMPACT "N" for direct mounting in actuator connections, used in pneumatic systems for regulating the flow rate of compressed air and the direction of flow. Equipped with a plug-in coupling for easy disassembly of pneumatic hoses. Adjustment change via a control knob and/or screwdriver; possibility of securing the setting with a locking nut. Size: M5, 1/8″, 1/4″, 3/8″, 1/2″. Working pressure: up to 10 bar. Operating temperature: from -10°C to +70°C. Material: nickel-plated brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal electric control dividing valve (solenoid valve), without control coil, most commonly used for controlling actuator operation. It can be mounted inline, to a wall, directly to actuators, or on a connection block. Function 3/2 - three-way, two-position. Material: valve body - aluminum, slider - nickel-plated aluminum, sealing - NBR, end cover - plastic. Operating pressure: up to 10 bar. Operating temperature: -10°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal valve type 6560 intended for industrial installations. It can be used for air, gases, water, chemicals, petrochemical products. Material: body - nickel-plated brass, ball: chrome-plated brass. Sealing: ball - Teflon, spindle - NBR. Operating temperature: from -20°C to +80°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsMiniature valve designed for pneumatic installations, with plug connections for direct mounting on hoses with calibrated outer diameters. Functionally similar to a ball valve (flow closure by rotating the knob 90º), it is, however, a miniature three-way sliding valve (3/2) with venting – it must be installed according to the flow direction indicated on the body. When the power supply is cut off, the system downstream of the valve is vented through openings located at the top of the knob, allowing for repairs and maintenance of the system. Body material: plastic. Slider material: brass. Seals: NBR o-ring. Operating temperature: from 0°C to +60°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal manual control distribution valve with a 90° lever, commonly used for controlling actuator operation. It can be mounted inline, to a wall, directly to actuators, or on a connection block. Function 5/2 - five-way, two-position or 5/3 - five-way, three-position. Material: valve body - aluminum, slider - nickel-plated aluminum, sealing - NBR, end cover - plastic. Operating pressure: up to 10 bar. Operating temperature: -10°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal pneumatic control distribution valve, most commonly used for controlling the operation of actuators. It can be mounted inline, to a wall, directly to actuators, or on a connection block. Function 3/2 - three-way, two-position. Material: valve body - aluminum, slider - nickel-plated aluminum, sealing - NBR, end cover - plastic. Working pressure: up to 10 bar. Operating temperature: -10°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMini mushroom valve, mechanically controlled, commonly used for controlling actuator operation. It can be mounted in any position. A small force is required to actuate the valve. Function 3/2 NO and NC - three flow paths, two positions. Connection: GW M5, plug-in connection Ø4 and Ø6 (axial or side). Actuation: push rod, panel-mounted push rod, lever with roller, lever with single-acting roller. Material: valve body - aluminum, push rod - nickel-plated brass, sealing - NBR, springs - stainless steel. Nominal flow: 60 l/min (at input pressure 6 bar Δp = 1 bar). Actuation force (push rod at 6 bar): 8 N. Operating pressure: from 0.5 to 10 bar. Operating temperature: -10°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThrottle-return valve type MRF NTC series COMPACT "N" for direct mounting in actuator connections, used in pneumatic systems for regulating the flow rate of compressed air and flow direction. Equipped with a plug-in coupling for easy disassembly of pneumatic hoses. Adjustment change via a control knob and/or screwdriver; possibility of securing the setting with a locking nut. Size: M5, 1/8″, 1/4″, 3/8″, 1/2″. Working pressure: up to 10 bar. Operating temperature: from -10°C to +50°C. Material: plastic.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal electric control distribution valve (solenoid valve), without control coil, most commonly used for controlling actuator operation. It can be mounted inline, to a wall, directly to actuators, or on a connection block. Function 5/3 - five-way, three-position. Distributor sizes: 1/8", 1/4", 3/8", 1/2". Material: valve body - aluminum, slider - nickel-plated aluminum, sealing - NBR, end cover - plastic. Working pressure: up to 10 bar. Operating temperature: -10°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSTOP shut-off valve series STP-U with a check valve and internal thread, primarily used as a safety valve. When installed on the actuator's supply connections, it allows airflow only in the presence of a pneumatic control signal. The actuator is stopped after a drop in control pressure. Operating pressure: 0.5 ÷ 10 bar. Operating temperature: from -10°C to +60°C. Body material: nickel-plated brass. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal manual control distribution valve with a 90° lever, commonly used for controlling actuator operation. It can be mounted inline, to a wall, directly to actuators, or on a connection block. Function 3/2 - three-way, two-position. Size: 1/8", 1/4" or 1/2". Material: valve body - aluminum, slider - nickel-plated aluminum, sealing - NBR, end cover - plastic. Working pressure: up to 10 bar. Operating temperature: -10°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThrottle-return valve type MRF OMC series COMPACT "O" for direct mounting in actuator connections, used in pneumatic systems for regulating the flow rate of compressed air and the direction of flow. Equipped with a plug-in coupling for easy disassembly of pneumatic hoses. Adjustment change using a screwdriver, with the possibility of mounting a protective cover. Size: M5, 1/8″, 1/4″, 3/8″, 1/2″. Working pressure: up to 10 bar. Operating temperature: from -10°C to +70°C. Material: nickel-plated brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsElectricly adjustable NAMUR valve for controlling pneumatic actuators. Its connection allows for direct mounting of valves on the actuator body. Function 5/2 - five-way, two-position. Material: valve body - aluminum, slider - nickel-plated aluminum, sealing - NBR, end cover - Hostaform®. Operating pressure: 2.5 ÷ 10 bar. Operating temperature: -10°C to +60°C. Nominal flow: 1100 l/min (at inlet pressure 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVNR series check valve allowing air flow in only one direction. Working pressure: 2 ÷ 10 bar. Operating temperature: from -10°C to +70°C. Body material: brass OT58. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal electric control distribution valve (solenoid valve), without control coil, most commonly used for controlling actuator operation. It can be mounted inline, to a wall, directly to actuators, or on a connection block. Function 5/2 - five-way, two-position. Material: valve body - aluminum, slider - nickel-plated aluminum, sealing - NBR, end cover - plastic. Operating pressure: up to 10 bar. Operating temperature: -10°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThrottle-reverse valve type MRF NMV series COMPACT "N" for installation in the connections of distribution valves, used in pneumatic systems to regulate the flow rate of compressed air and the direction of flow. Equipped with a plug-in coupling for easy disassembly of pneumatic hoses. Adjustment change via a control knob and/or screwdriver; possibility of securing the setting with a locking nut. Size: M5, 1/8″, 1/4″, 3/8″, 1/2″. Working pressure: up to 10 bar. Operating temperature: from -10°C to +70°C. Material: nickel-plated brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThrottle-return valve type MRF OTC series COMPACT "O" for direct mounting in actuator connections, used in pneumatic systems for regulating the flow rate of compressed air and the direction of flow. Equipped with a plug connection for easy disassembly of pneumatic hoses. Adjustment change using a screwdriver, with the possibility of mounting a protective cover. Size: M5, 1/8″, 1/4″, 3/8″, 1/2″. Working pressure: up to 10 bar. Operating temperature: from -10°C to +50°C. Material: plastic.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal manual control distribution valve with a front lever, commonly used for controlling actuator operation. It can be mounted inline, to a wall, directly to actuators, or on a connection block. Function 5/2 - five-way, two-position. Material: valve body - aluminum, slider - nickel-plated aluminum, sealing - NBR, end cover - plastic. Operating pressure: up to 10 bar. Operating temperature: -10°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMRF NMB type throttling valve series COMPACT "N" used for simultaneous flow regulation in both directions - during filling and venting, applied in pneumatic systems for regulating the flow rate of compressed air and flow direction. Equipped with a plug-in connection for easy disassembly of pneumatic hoses. Adjustment change via a control knob and/or screwdriver; possibility of securing the setting with a locking nut. Size: M5, 1/8″, 1/4″, 3/8″, 1/2″. Working pressure: up to 10 bar. Operating temperature: from -10°C to +70°C. Material: nickel-plated brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThrottle check valve series RFL type U, regulating air flow value in only one direction. Used for controlling the working speed of actuators in pneumatic systems. Size: M5, 1/8″, 1/4″, 3/8″, 1/2″. Working pressure: up to 10 bar. Operating temperature: up to +70°C. Body material: aluminum. Housing material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal pneumatic control distribution valve, most commonly used for controlling the operation of actuators. It can be mounted inline, to a wall, directly to actuators, or on a connection block. Function 5/2 - five-way, two-position. Material: valve body - aluminum, slider - nickel-plated aluminum, sealing - NBR, end cover - plastic. Working pressure: up to 10 bar. Operating temperature: -10°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal manual control distribution valve with actuator assistance for panel control. Most commonly used for controlling actuator operation. An MW-035100005 adapter is always required during installation. Function 5/2 - five-way, two-position. Size: 1/8". Material: valve body - aluminum, slider - nickel-plated aluminum, sealing - NBR, end cover - plastic. Working pressure: up to 10 bar. Operating temperature: -10°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSTOP valve series STP-B with internal thread is a pneumatically controlled valve. It allows air flow through the valve upon simultaneous application of a pneumatic control signal (pilot). In the event of a loss of the control signal, the valve is closed in both flow directions. The STP-B valve installed in the actuator supply connection causes, in the absence of pressure at the control connection (pilot), the stopping of the actuator movement. The use of STP-B valves as safety valves should be preceded by an appropriate risk analysis of the pneumatic system or the entire device. Operating pressure: 0.5 to 10 bar. Operating temperature: from -10°C to +60°C. Body material: nickel-plated brass. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe quick exhaust valve is used to increase the speed of the actuator by rapidly venting air. Body material: nickel-plated brass. Cover material: nickel-plated brass (1/8" ÷ 1/4"), anodized aluminum (1/2"). Flat gasket: NBR. Lip seal: polyurethane. Maximum pressure: 12 bar. Minimum pressure: 0.5 bar. Operating temperature: from 0°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal manual control distribution valve with a front lever, commonly used for controlling actuator operation. It can be mounted inline, to a wall, directly to actuators, or on a connection block. Function 5/3 - five-way, three-position. Size: 1/8". Material: valve body - aluminum, slider - nickel-plated aluminum, sealing - NBR, end cover - plastic. Working pressure: up to 10 bar. Operating temperature: -10°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsElectric dividing valve, without control coil PIV for wired installation. It is a pneumatic component whose task is to control the direction of flow of the working medium in pneumatic drive and control systems by connecting or switching flow paths. Suitable for operation with high frequency and short response times. Possible installation in any position. Valve body material: aluminum. Connection thread: GW M5, GW BSP1/8”. Working medium: filtered compressed air, oiled or non-oiled. Maximum working pressure: from 6 bar to 30 bar, depending on the type of valve and coil. Operating temperature: -15°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThrottle-return valve type MRF OFC series COMPACT "O" for direct mounting in actuator connections, used in pneumatic systems for regulating the flow rate of compressed air and the direction of flow. Equipped with an internal threaded connection. Adjustment change using a screwdriver, with the possibility of mounting a protective cover. Size: M5, 1/8″, 1/4″, 3/8″, 1/2″. Working pressure: up to 10 bar. Operating temperature: from -10°C to +70°C. Material: nickel-plated brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal manual control distribution valve with a front lever, commonly used for controlling actuator operation. It can be mounted inline, to a wall, directly to actuators, or on a connection block. Function 3/2 - three-way, two-position. Material: valve body - aluminum, slider - nickel-plated aluminum, sealing - NBR, end cover - plastic. Operating pressure: up to 10 bar. Operating temperature: -10°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal mechanical control distribution valve with spring rod assistance, commonly used for controlling actuator operation. Can be mounted in any position. Function 3/2 - three-way, two-position. Size: 1/8". Material: valve body - aluminum, slider - nickel-plated aluminum, sealing - NBR, end cover - plastic. Working pressure: up to 10 bar. Operating temperature: -10°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThrottle-return valve type MRF HTC series HIGH-FLOW for direct mounting in actuator connections, used in pneumatic systems for regulating the flow rate of compressed air and the direction of flow. Recommended for applications requiring high flow rates during both filling and venting. Equipped with a plug connection for easy disassembly of pneumatic hoses. Adjustment change via a control knob and/or screwdriver; possibility of securing the setting with a locking nut. Size: 1/8″, 1/4″. Working pressure: up to 10 bar. Operating temperature: from -10°C to +50°C. Material: plastic.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal mechanical control distribution valve, lever with roller assistance, commonly used for controlling actuator operation. Can be mounted in any position. Function 3/2 - three-way, two-position. Size: 1/8". Material: valve body - aluminum, slider - nickel-plated aluminum, sealing - NBR, end cover - plastic. Working pressure: up to 10 bar. Operating temperature: -10°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThrottle valve series RFL type B, regulating the airflow value in both directions. It is used to control the working speed of actuators in pneumatic systems. Size: M5, 1/8″, 1/4″, 3/8″, 1/2″. Working pressure: up to 10 bar. Operating temperature: up to +70°C. Body material: aluminum. Housing material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSimple foot valve with protective cover and sockets in the front plane, used for foot control by the operator of devices in pneumatic systems. Connection: 1/4". Working pressure: from 2.5 bar to 10 bar. Operating temperature: -10°C to +60°C. Nominal flow: 840 l/min (at inlet pressure 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSTOP shut-off valve series STP-B with plug connections used mainly as a safety valve. When installed on the actuator's supply connections, it allows air flow only in the presence of a pneumatic control signal. The actuator is stopped after a drop in control pressure. Operating pressure: 0.5 ÷ 10 bar. Operating temperature: from -10°C to +60°C. Body material: nickel-plated brass. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal pneumatic control distribution valve, most commonly used for controlling the operation of actuators. It can be mounted inline, on a wall, directly to actuators, or on a connection block. Function 5/2 - five-way, two-position. Material: valve body - aluminum, slider - nickel-plated aluminum, sealing - NBR, end cover - plastic. Working pressure: up to 10 bar. Operating temperature: -10°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThrottle-reverse valve type MRF NTV series COMPACT "N" for installation in the connections of distribution valves, used in pneumatic systems for regulating the flow rate of compressed air and the direction of flow. Equipped with a plug-in coupling for easy disassembly of pneumatic hoses. Adjustment change via a control knob and/or screwdriver; possibility of securing the setting with a locking nut. Size: M5, 1/8″, 1/4″, 3/8″, 1/2″. Working pressure: up to 10 bar. Operating temperature: from -10°C to +50°C. Material: plastic.
- Select options This product has multiple variants. The options may be chosen on the product page / Details3/2 shut-off valve used as a switching and venting valve for the pneumatic system. When the control sleeve is moved back, the pneumatic system is vented, and when the sleeve is moved forward, the pneumatic system is pressurized. Working pressure: 10 bar. Operating temperature: from -10°C to +80°C. Body material: chrome-plated brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal mechanical control distribution valve, with a front lever and roller, commonly used for controlling actuator operation. Can be mounted in any position. Function 3/2 - three-way, two-position. Size: 1/8". Material: valve body - aluminum, slider - nickel-plated aluminum, sealing - NBR, end cover - plastic. Working pressure: up to 10 bar. Operating temperature: -10°C to +60°C.
