Is the Straight connector with GZ BSP, PVDF, 3F series compatible with medical and food-grade sterilization methods?

Straight connector with GZ BSP, PVDF, 3F series: Based on the provided description of the Angle nipple 90Â° with external BSP thread, series 3F type EM (materials: polypropylene, PVDF; working pressure: 10 bar) the PVDF version of the Straight connector with GZ BSP, PVDF, 3F series is likely suitable for many medical and food-grade sterilization methods. PVDF is chemically resistant, has good thermal stability, and is commonly used in laboratory, medical and food applications, tolerating common sterilization processes such as autoclaving (steam sterilization) at typical temperatures (121â134Â°C) and chemical sterilants (e.g., ethylene oxide, hydrogen peroxide vapor) better than polypropylene. However, compatibility depends on exact part design, manufacturing tolerances, seals (Oârings), and any additives. To ensure safe use in validated medical or food sterilization cycles, confirm with the manufacturer: validated temperature and pressure limits for repeated autoclaving, approved surface finish and biocompatibility certification, compatibility of any elastomeric seals with chosen sterilants, and any regulatory certifications (e.g., USP, FDA, EU food contact).

Can the Angle nipple 90Â° with external BSP thread, series 3F type EM (PP/PVDF) withstand repeated sterilization in autoclaves and chemical agents used in food and pharma?

Straight connector with GZ BSP, PVDF, 3F series has broad suitability for laboratory, medical, pharmaceutical, chemical and food applications. PVDF and polypropylene are widely used for components requiring chemical resistance and steam sterilization. PVDF offers excellent resistance to most chemicals and good thermal stability (continuous use temperatures typically up to ~140 Â°C, short-term higher), so it tolerates repeated autoclaving (121â134 Â°C) and common cleaning agents used in food/pharma when used within pressure/temperature limits. Polypropylene is chemically resistant to many agents and accepts autoclaving, but has lower maximum temperature (around 100â120 Â°C) and may degrade faster under repeated high-temperature cycles or aggressive chemicals. With a working pressure of 10 bar, ensure autoclave cycles and chemical exposure do not exceed the material temperature and pressure ratings and avoid strong oxidizers or solvents that attack the specific polymer. For critical validated processes, perform manufacturer confirmation and in-house compatibility and sterilization validation.

Does the Straight connector with GZ BSP, PVDF, 3F series meet FDA or EU food-contact regulations?

Based on the provided description of the Angle nipple 90Â° with external BSP thread, series 3F type EM. which lists materials including polypropylene and PVDF and notes applications in laboratories, medicine, pharmaceutical, chemical, and food industries. one cannot definitively state that the Straight connector with GZ BSP, PVDF, 3F series meets FDA or EU food-contact regulations. Presence of PVDF (a material commonly used in food- and medical-grade components) and intended application in food-related industries suggests the product may be designed for such uses, but regulatory compliance requires explicit certification or declaration from the manufacturer. FDA and EU (EU Regulation 10/2011 for plastics, and relevant national rules) compliance depends on: material formulation and additives, specific migration limits, manufacturing processes, traceability, and supplier documentation (e.g., Declaration of Conformity, specific migration test reports, overall migration, and, if applicable, NSF or thirdâparty test/certification). Therefore, to confirm whether Straight connector with GZ BSP, PVDF, 3F series meets FDA or EU food-contact regulations, request from the manufacturer or supplier: - Declaration of Conformity for EU food contact (per Regulation 10/2011 or applicable framework), - Statement of compliance with FDA 21 CFR for food-contact polymers (if intended for US market), - Material safety data, additive lists, and specific/overall migration test reports, - Any third-party certifications (NSF, USP, etc.) relevant to food/medical use. Without those documents, compliance cannot be assumed.

90° angled nipple elbow with a BSP male thread of PP, PVDF plastic, 3F series type EM

All products, Low-pressure fittings and adapters/

Additional information

Material	P – material (plastic)

90° angled nipple with a BSP male thread, 3F series type EM, is widely used in laboratories, medicine, and the pharmaceutical, chemical and food industries. Material: polypropylene, PVDF. Working pressure: 10 bar.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
EM-3F233GG12PP	Connector 90° (3F series) with 1/2" BSP male, polypropylene	-	10	In stock	Enquiry
EM-3F233GG12PV	Connector 90° (3F series) with 1/2" BSP male, PVDF	-	10	In stock	Enquiry
EM-3F233GG14PP	Connector 90° (3F series) with 1/4" BSP male, polypropylene	-	10	In stock	Enquiry
EM-3F233GG14PV	Connector 90° (3F series) with 1/4" BSP male, PVDF	-	10	In stock	Enquiry
EM-3F233GG18PP	Connector 90° (3F series) with 1/8" BSP male, polypropylene	-	10	In stock	Enquiry
EM-3F233GG18PV	Connector 90° (3F series) with 1/8" BSP male, PVDF	-	10	In stock	Enquiry
EM-3F233GG38PP	Connector 90° (3F series) with 3/8" BSP male, polypropylene	-	10	In stock	Enquiry
EM-3F233GG38PV	Connector 90° (3F series) with 3/8" BSP male, PVDF	-	10	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

90° angled nipple with a BSP male thread, 3F series type EM, is widely used in laboratories, medicine, and the pharmaceutical, chemical and food industries. Material: polypropylene, PVDF. Working pressure: 10 bar.