Does the BURGACLIP 90Â° tube end with UNF GZ, steel, type 54214 require any specific torque or sealing compound when connecting to 3090 type air conditioning hose?

The BURGACLIP 90Â° tube end with UNF GZ, steel, type 54214 does not specify a required torque or a mandatory sealing compound in the provided description. It is described as an external UNF threaded 90Â° tube end with a socket for 3090 type air conditioning hose, intended to connect rubber hoses to air conditioning components; clips and clamps are supplied separately. Recommended best practice (not stated in the description): - Use the manufacturerâs recommended clamp or clip for securing the 3090 hose to the socket; proper clamp selection and correct tightening are critical for a leak-free joint. - For the UNF threaded connection, hand-start the thread and tighten to a firm, snug fit.if a torque value is required, follow vehicle or system manufacturer specifications for similar steel UNF fittings. If no spec is available, avoid over-torquing to prevent thread damage. - If system leakage is a concern and the mating component does not have an integral sealing surface, use an appropriate thread sealant or PTFE tape rated for refrigerant/O-ring compatibility and the operating temperatures/pressures of the AC system; confirm chemical compatibility with refrigerant and oil. If exact torque or sealing requirements are critical, consult BURGACLIP technical data, the hose/system manufacturer, or vehicle-specific service documentation.

Is BURGACLIP 90Â° tube end with UNF GZ, steel, type 54214 compatible with refrigerants and oils used in 3090 type AC hoses?

Yes. BURGACLIP 90Â° tube end with UNF GZ, steel, type 54214 is designed for 3090 type air conditioning hoses and thus is compatible with the refrigerants and oils normally used with those hoses. It provides a steel, UNF-threaded socket connection for rubber AC hoses and is intended for standard AC system fluids; clips and clamps are supplied separately. If you use atypical refrigerants/oils or extreme operating conditions, verify chemical compatibility and temperature/pressure ratings with the hose and system manufacturer.

Can BURGACLIP 90Â° tube end with UNF GZ, steel, type 54214 be used with braided or reinforced 3090 type AC hoses?

Yes. BURGACLIP 90Â° tube end with UNF GZ, steel, type 54214 is specified for 3090 type air conditioning hose, so it can be used with braided or reinforced 3090 type AC hoses. It provides an external UNF thread and socket to connect rubber hoses to air-conditioning components; clips and clamps are supplied separately. Ensure correct clip/clamp selection and torque for a secure, leak-free joint, and verify compatibility with refrigerant and pressure ratings of your specific 3090 hose assembly.

BURGACLIP 90° tube end with UNF GZ, steel, type 54214

Additional information

Material	CS – steel (cast iron)

90° tube end BURGACLIP with external UNF thread, with socket, for 3090 type air conditioning hose. Allows for the connection of rubber hoses to components of the air conditioning system. Clips and clamps are available as a separate assortment. Material: steel.

List of product variants

Article number	Product variant name	Nominal inner diameter	Working pressure [bar]
BU-54214-06-06-S	End 90° BC tubular, GZ 5/8", hose 5/16", steel	-	35
BU-54214-08-08-S	End 90° BC tubular, GZ 3/4", hose 13/32", steel	-	35
BU-54214-10-10-S	End fitting 90° BC tubular, GZ 7/8", hose 1/2", steel	-	35
BU-54214-10-12-S	End 90° BC tubular, GZ 7/8", hose 5/8", steel	-	35
BU-54214-12-12-S	End. 90° BC tubular, GZ 1.1/16", hose 5/8", steel	-	35

90° tube end BURGACLIP with external UNF thread, with socket, for 3090 type air conditioning hose. Allows for the connection of rubber hoses to components of the air conditioning system. Clips and clamps are available as a separate assortment. Material: steel.