Is the Air gun with a 90 mm bent Star-Tip nozzle, series 208 safe to use continuously at 16 bar without exceeding the <85 dB sound limit?

Air gun with a 90 mm bent Star-Tip nozzle, series 208 is specified with a working pressure of 16 bar and a declared sound level below 85 dB (in accordance with the European Machinery Directive art. 1.5.8). Based on the provided description, continuous use at 16 bar does not exceed the <85 dB sound limit as declared by the manufacturer and the product complies with the referenced standards (including OSHA 1-13.1). Ensure the gun is used and maintained according to manufacturer instructions and applicable workplace procedures; if precise on-site verification is required, perform a sound measurement under your actual working conditions.

Can the Air gun with a 90 mm bent Star-Tip nozzle, series 208 be used with non-explosive liquids as well as air and water?

Yes. The Air gun with a 90 mm bent Star-Tip nozzle, series 208 is designed as a universal gun for air, water, and non-explosive fluids, so it can be used with non-explosive liquids as well as air and water. Its materials (POM body, brass valve, NBR seals), working pressure (16 bar) and operating temperature range (-20Â°C to +60Â°C) support such use, and the model includes a non-replaceable 90 mm bent Star-Tip nozzle. Ensure the fluid is non-explosive and compatible with the materials and pressure limits.

Does the Air gun with a 90 mm bent Star-Tip nozzle, series 208 require special maintenance for POM/brass/NBR components?

Air gun with a 90 mm bent Star-Tip nozzle, series 208 does not require any special maintenance for its POM (body), brass (valve) and NBR (seals) components beyond standard good-practice care. Recommended maintenance: - Regular inspection: check body, valve and seals for wear, cracks or deformation before use. - Cleaning: keep nozzle and body free of dirt and residues; use mild detergents or compressed air. Avoid aggressive solvents that can attack NBR or POM. - Lubrication: light, compatible lubrication of moving metal parts if needed; use lubricants approved for NBR (avoid silicone or petroleum-based greases that may swell seals). - Seal replacement: replace NBR seals when leakage or loss of performance occurs. - Operating limits: do not exceed working temperature range (â20Â°C to +60Â°C) or working pressure (16 bar). Avoid exposure to chemicals incompatible with POM, brass or NBR. - Storage: store dry and protected from UV and aggressive chemicals. Following these routine measures will ensure reliable performance and service life without special proprietary maintenance procedures.

An air gun with nozzle bent 90 mm Star-Tip, series 208

Q: Is the Air gun with a 90 mm bent Star-Tip nozzle, series 208 safe to use continuously at 16 bar without exceeding the <85 dB sound limit?

Air gun with a 90 mm bent Star-Tip nozzle, series 208 is specified with a working pressure of 16 bar and a declared sound level below 85 dB (in accordance with the European Machinery Directive art. 1.5.8). Based on the provided description, continuous use at 16 bar does not exceed the <85 dB sound limit as declared by the manufacturer and the product complies with the referenced standards (including OSHA 1-13.1). Ensure the gun is used and maintained according to manufacturer instructions and applicable workplace procedures; if precise on-site verification is required, perform a sound measurement under your actual working conditions.

Q: Can the Air gun with a 90 mm bent Star-Tip nozzle, series 208 be used with non-explosive liquids as well as air and water?

Yes. The Air gun with a 90 mm bent Star-Tip nozzle, series 208 is designed as a universal gun for air, water, and non-explosive fluids, so it can be used with non-explosive liquids as well as air and water. Its materials (POM body, brass valve, NBR seals), working pressure (16 bar) and operating temperature range (-20Â°C to +60Â°C) support such use, and the model includes a non-replaceable 90 mm bent Star-Tip nozzle. Ensure the fluid is non-explosive and compatible with the materials and pressure limits.

Q: Does the Air gun with a 90 mm bent Star-Tip nozzle, series 208 require special maintenance for POM/brass/NBR components?

Air gun with a 90 mm bent Star-Tip nozzle, series 208 does not require any special maintenance for its POM (body), brass (valve) and NBR (seals) components beyond standard good-practice care. Recommended maintenance: - Regular inspection: check body, valve and seals for wear, cracks or deformation before use. - Cleaning: keep nozzle and body free of dirt and residues; use mild detergents or compressed air. Avoid aggressive solvents that can attack NBR or POM. - Lubrication: light, compatible lubrication of moving metal parts if needed; use lubricants approved for NBR (avoid silicone or petroleum-based greases that may swell seals). - Seal replacement: replace NBR seals when leakage or loss of performance occurs. - Operating limits: do not exceed working temperature range (â20Â°C to +60Â°C) or working pressure (16 bar). Avoid exposure to chemicals incompatible with POM, brass or NBR. - Storage: store dry and protected from UV and aggressive chemicals. Following these routine measures will ensure reliable performance and service life without special proprietary maintenance procedures.

Air guns, All products/

An air gun with nozzle bent 90 mm Star-Tip, series 208

Additional information

A universal gun for air, water and also non-explosive liquids. Intended mainly for blowing out contamination, also in hard-to-reach places. It is characterized by a strong blowing force, with the possibility of adjusting the flow rate. Lightweight construction, ergonomic gun shape and low trigger press force ensure great working comfort. standard A gun equipped is in socket with a thread 1/4″ BSP. this model Available is in version with nozzle 90 mm bent Star-Tip, which nie is replaceable. Sound level below 85 dB, in accordance with the European Machinery Directive art. 1.5.8. Compliant with the OSHA 1-13.1 standard. (European Agency for Safety and Health at Work). wide range additional accessories allows na adjustment for specific requirements applications. Material: POM (body), brass (valve) Sealing: NBR. pressure working: 16 bar. pressure bursting: 64 bar. Operating temperature: from -20°C to +60°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
CJ-112083100	Air gun CEJN, nozzle bent Star-Tip, L=90 mm, 1/4" BSP female	-	16	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

A universal gun for air, water and also non-explosive liquids. Intended mainly for blowing out contamination, also in hard-to-reach places. It is characterized by a strong blowing force, with the possibility of adjusting the flow rate. Lightweight construction, ergonomic gun shape and low trigger press force ensure great working comfort. standard A gun equipped is in socket with a thread 1/4″ BSP. this model Available is in version with nozzle 90 mm bent Star-Tip, which nie is replaceable. Sound level below 85 dB, in accordance with the European Machinery Directive art. 1.5.8. Compliant with the OSHA 1-13.1 standard. (European Agency for Safety and Health at Work). wide range additional accessories allows na adjustment for specific requirements applications. Material: POM (body), brass (valve) Sealing: NBR. pressure working: 16 bar. pressure bursting: 64 bar. Operating temperature: from -20°C to +60°C.