Can a Hose clamp, two-part with loose tongue, stainless steel (AISI 316) safely hold hose assemblies up to 16 bar when installed correctly?

Yes . when correctly installed and combined with a hose and end fitting selected for the application, the Hose clamp, two-part with loose tongue, stainless steel can safely hold hose assemblies up to 16 bar. The clampâs two-part design (separate loose tongues, similar to DIN 20039 A) is intended for securing hose ends and connections without a safety flange; made of AISI 316 stainless steel, it provides corrosion resistance and mechanical strength suitable for such pressures. Safety and reliability depend on correct clamp sizing, proper placement and tightening torque, compatible hose and barb/profiled fitting, and adherence to the hose and fitting manufacturersâ pressure ratings and installation instructions. Regular inspection and maintenance are also recommended for long-term service.

Can Hose clamp, two-part with loose tongue, stainless steel (AISI 316) be used for sanitary hose assemblies up to 16 bar?

Yes. Hose clamp, two-part with loose tongue, stainless steel can be used for sanitary hose assemblies up to 16 bar provided conditions are met: correct installation, a hose and end fitting rated for the pressure, and compatibility with the tail/no-lock connection. The clampâs two-part design with separate tongues (similar to DIN 20039 A) and AISI 316 construction supports this application when the overall assembly is properly selected and installed.

Can Hose clamp, two-part with loose tongue, stainless steel be used with PTFE-lined hoses up to 16 bar?

Yes. The Hose clamp, two-part with loose tongue, stainless steel can be used with PTFE-lined hoses up to 16 bar, provided conditions are met: - Use compatible PTFE-lined hose and end fittings rated for â¥16 bar. - Install the clamp per manufacturer instructions, ensuring the loose tongue inserts seat correctly and the clamped assembly compresses the hose tail securely (no safety flange required). - Material compatibility is appropriate: clamp is AISI 316 stainless steel. - Verify hose wall thickness and liner support so the clamp can exert sufficient radial pressure without damaging the PTFE liner or causing leaks. - Perform pressure testing after assembly and follow periodic inspection for loosening, deformation or corrosion. When properly selected and installed with suitable hose and fittings, the clamp supports working pressure up to 16 bar.

Hose clamp, two-part with loose tongue, stainless steel

Additional information

Material	SS – stainless steel

Two-part clamp, design similar to DIN 20039 A standard, with separate inserts – “tongues” for clamping. Intended for mounting ends and connections with a hose part (“tail”) without a lock (safety flange). Material: AISI 316 steel. With proper installation, appropriately selected hose and end fitting, working pressure up to 16 bar.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
LU-SLE-13	AISI 316 2-pc clamp for 13 mm hose, range 18÷26 mm	-	-	In stock	Enquiry
LU-SLE-19	AISI 316 2-piece clamp for 19 mm hose, range 26÷33 mm	-	-	In stock	Enquiry
LU-SLE-25	AISI 316 clamp 2-pc. for hose 25 mm, range 32÷40 mm	-	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Two-part clamp, design similar to DIN 20039 A standard, with separate inserts – “tongues” for clamping. Intended for mounting ends and connections with a hose part (“tail”) without a lock (safety flange). Material: AISI 316 steel. With proper installation, appropriately selected hose and end fitting, working pressure up to 16 bar.