Can the Collet for hydraulic hoses 4SH, R13, R15, carbon steel, type IL4 be used only with INTERLOCK hydraulic fittings and what are the required D1/D2/D3 measurements for correct assembly?

Question: Can the Collet for hydraulic hoses 4SH, R13, R15, carbon steel, type IL4 be used only with INTERLOCK hydraulic fittings and what are the required D1/D2/D3 measurements for correct assembly? Answer: Yes. The Collet for hydraulic hoses 4SH, R13, R15, carbon steel, type IL4 is intended for use only with INTERLOCK hydraulic fittings from the same supplier. Required measurements for correct assembly (as defined in the product description): - D1 [mm] . outer diameter (external machining) - D2 [mm] . inner diameter (internal machining) - D3 [mm] . lock diameter (locking feature) Material: carbon steel, galvanized.

Is the Collet for hydraulic hoses 4SH, R13, R15, carbon steel, type IL4 compatible only with INTERLOCK fittings and which D1/D2/D3 sizes are needed?

Collet for hydraulic hoses 4SH, R13, R15, carbon steel, type IL4 Format is compatible only with INTERLOCK hydraulic fittings from the same supplier. Assembly requires external and internal machining. Required dimensions: D1 = outer diameter of the sleeve, D2 = inner diameter, D3 = lock diameter; select the specific D1/D2/D3 values to match the corresponding INTERLOCK fitting and the hose nominal size (4SH, R13, R15). Material: carbon steel, galvanized.

Is Collet for hydraulic hoses 4SH, R13, R15, carbon steel, type IL4 compatible only with INTERLOCK fittings and what are the required D1/D2/D3?

Collet for hydraulic hoses 4SH, R13, R15, carbon steel, type IL4 Format. compatibility and required diameters Compatibility: The Collet for hydraulic hoses 4SH, R13, R15, carbon steel, type IL4 Format is intended for use only with INTERLOCK hydraulic fittings from the same supplier. It is not compatible with other fitting systems. Required diameters: - D1 [mm]. outer diameter: corresponds to the external diameter of the collet (matches the hose outer diameter with the collet installed). - D2 [mm]. inner diameter: corresponds to the bore through which the hose inserts (must match the hose outer diameter without cover or the fittingâs specified hose seat). - D3 [mm]. lock diameter: corresponds to the internal locking diameter that interfaces with the INTERLOCK fittingâs locking profile. Note: Exact numeric values for D1, D2, and D3 are determined by the specific IL4 size variant supplied (match to the hose nominal size and the matching INTERLOCK fitting specification). Ensure you use the dimensions provided by the supplier for the specific hose size to guarantee proper assembly (external and internal machining) and secure locking.

Collet for hydraulic hoses 4SH, R13, R15, carbon steel, type IL4

All products, Fittings for high-pressure hoses/

Additional information

Material	CS – steel (cast iron)

IL4 clamping sleeve for rubber hydraulic hoses with spiral reinforcement type 4SH, R13, and R15. Use only with INTERLOCK hydraulic fittings from the same supplier. Assembly – external and internal machining. Diameter D1 [mm] – outer diameter. Diameter D2 [mm] – inner diameter. Diameter D3 [mm] – lock diameter. Material: carbon steel, galvanized.

List of product variants

Article number	Product variant name	Nominal inner diameter	Working pressure [bar]
TI-IL4-12	INTERLOCK sleeve for hose 4SH/R13/R15 3/4"	20	-
TI-IL4-16	INTERLOCK sleeve for hose 4SH/R13/R15 1"	25	-
TI-IL4-20	INTERLOCK sleeve for hose 4SH 1.1/4"	32	-
TI-IL4-24	INTERLOCK sleeve for hose 4SH 1.1/2"	38	-
TI-IL4-32	INTERLOCK sleeve for hose 4SH 2"	50	-

IL4 clamping sleeve for rubber hydraulic hoses with spiral reinforcement type 4SH, R13, and R15. Use only with INTERLOCK hydraulic fittings from the same supplier. Assembly – external and internal machining. Diameter D1 [mm] – outer diameter. Diameter D2 [mm] – inner diameter. Diameter D3 [mm] – lock diameter. Material: carbon steel, galvanized.