Is Collet for Teflon hoses, stainless steel, AF-THU compatible with HYPERLINE SB, FX, V type PTFE hoses of specified D1/D2/D3 dimensions?

Collet for Teflon hoses, stainless steel, AF-THU Format Yes . the AF-THU clamping sleeve is compatible with HYPERLINE SB, FX, V type PTFE hoses provided the hose dimensions match the sleeveâs specified diameters. Compatibility requires: - D1 (outer diameter) of the hose equals the sleeveâs D1 spec, - D2 (inner diameter) of the hose equals the sleeveâs D2 spec, - D3 (lock diameter) of the sleeve matches the hoseâs locking/interface requirement. Material (AISI 304) and design of the AF-THU are intended for PTFE/HYPERLINE SB, FX, V series hoses, but proper fit depends strictly on matching D1/D2/D3. If any measured hose dimension differs from the sleeve specification, interchangeability and secure clamping cannot be guaranteed.

Does the Collet for Teflon hoses, stainless steel, AF-THU fit HYPERLINE SB, FX, V type PTFE hoses with specified D1/D2/D3?

Yes. The Collet for Teflon hoses, stainless steel, AF-THU is designed specifically as a clamping sleeve for HYPERLINE SB, FX, V type PTFE hoses and fits when the hose dimensions match the specified diameters: D1 = outer diameter, D2 = inner diameter, and D3 = lock diameter. Material AISI 304 stainless steel ensures compatibility and clamping reliability for those HYPERLINE hose types when the listed D1/D2/D3 values correspond to the hose measurements.

Can Collet for Teflon hoses, stainless steel, AF-THU be used with HYPERLINE SB, FX, V PTFE hoses of these D1/D2/D3 sizes?

Yes. Collet for Teflon hoses, stainless steel, AF-THU can be used with HYPERLINE SB, FX, V PTFE hoses provided the hose dimensions match the AF-THU specified diameters. AF-THU is a clamping sleeve designed for HYPERLINE SB, FX, V type PTFE hoses; its compatibility depends on three key measurements: - D1 (outer diameter) of the hose must equal the AF-THU D1 specification so the sleeve fits over the hose exterior. - D2 (inner diameter) must correspond to the hose wall/insert clearance intended by the AF-THU design to ensure proper seating. - D3 (lock diameter) must match the clamping/locking diameter of the AF-THU so a secure mechanical lock is achieved when tightened. Material is AISI 304 stainless steel, so corrosion resistance and mechanical strength are suitable for typical PTFE hose applications. If your HYPERLINE SB/FX/V hose D1/D2/D3 dimensions match the AF-THU dimensions, the Collet for Teflon hoses, stainless steel, AF-THU is compatible. If any of the three diameters differ, do not use it without verifying fit or consulting the manufacturer.

Collet for Teflon hoses, stainless steel, AF-THU

All products, PTFE hoses/

Additional information

Material	SS – stainless steel
Standard length [m]	4

AF-THU clamping sleeve for HYPERLINE SB, FX, V type PTFE hoses. Diameter D1 [mm] – outer diameter. Diameter D2 [mm] – inner diameter. Diameter D3 [mm] – lock diameter. Material: AISI 304 steel.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
AF-THU-03-SS	THU type bushing for Teflon hose 3/16", AISI 304	3	-	In stock	Enquiry
AF-THU-04-SS	THU type bushing for Teflon hose 1/4", AISI 304	4	-	In stock	Enquiry
AF-THU-05-SS	THU type bushing for Teflon hose 5/16", AISI 304	5	-	In stock	Enquiry
AF-THU-06-SS	THU type bushing for Teflon hose 3/8", AISI 304	6	-	In stock	Enquiry
AF-THU-08-SS	THU type bushing for Teflon hose 1/2", AISI 304	8	-	In stock	Enquiry
AF-THU-10-SS	THU type bushing for Teflon hose 5/8", AISI 304	10	-	In stock	Enquiry
AF-THU-12-SS	THU type bushing for Teflon hose 3/4", AISI 304	12	-	In stock	Enquiry
AF-THU-16-SS	THU type bushing for Teflon hose 1", AISI 304	16	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

AF-THU clamping sleeve for HYPERLINE SB, FX, V type PTFE hoses. Diameter D1 [mm] – outer diameter. Diameter D2 [mm] – inner diameter. Diameter D3 [mm] – lock diameter. Material: AISI 304 steel.