FIRE UNIVERSAL classic flat fire hose
Very lightweight and flexible flat-folded suction hose for water for hydrants and fire pumps, without fittings. The hydrant hose complies with the EN 14540 standard and is used in internal hydrants according to EN-671-2. The hose for pumps is used for fire, rescue, and forestry motor pumps. In addition to fire-fighting functions, it is widely used in industry, construction, agriculture, and mining. It can be used for the transmission of water, seawater, industrial water, and solutions of certain chemical substances. The inner layer is smooth, resistant to mold and rot. The outer layer (braid) is of high strength, resistant to weather conditions and abrasion. Also available in a yellow luminescent version (DN52, DN75, 20m, for pumps). Certifications (Poland): Hoses comply with the technical conditions of the MSWiA Regulation of April 27, 2010. Inner layer: PVC insert (PU for DN110). Reinforcement: polyester braid. Working pressure: from 12 bar to 15 bar – depending on the hose diameter. Operating temperature: from -30°C to +60°C.
List of product variants
| Article number | Product variant name | Nominal inner diameter | Working pressure [bar] | Enquiry |
|---|---|---|---|---|
| BZ-FIRE-U-025 | FIRE UNIVERSAL hose 25 mm | 25 | 15 | |
| BZ-FIRE-U-052 | FIRE UNIVERSAL hose 52 mm | 50 | 15 | |
| BZ-FIRE-U-075 | FIRE UNIVERSAL hose 75 mm | 75 | 15 | |
| BZ-FIRE-U-110 | FIRE UNIVERSAL hose 110 mm | 110 | 12 |
Very lightweight and flexible flat-folded suction hose for water for hydrants and fire pumps, without fittings. The hydrant hose complies with the EN 14540 standard and is used in internal hydrants according to EN-671-2. The hose for pumps is used for fire, rescue, and forestry motor pumps. In addition to fire-fighting functions, it is widely used in industry, construction, agriculture, and mining. It can be used for the transmission of water, seawater, industrial water, and solutions of certain chemical substances. The inner layer is smooth, resistant to mold and rot. The outer layer (braid) is of high strength, resistant to weather conditions and abrasion. Also available in a yellow luminescent version (DN52, DN75, 20m, for pumps). Certifications (Poland): Hoses comply with the technical conditions of the MSWiA Regulation of April 27, 2010. Inner layer: PVC insert (PU for DN110). Reinforcement: polyester braid. Working pressure: from 12 bar to 15 bar – depending on the hose diameter. Operating temperature: from -30°C to +60°C.
Additional information
| Material | PVC – polyvinyl chloride |
|---|---|
| Maximum operating temperature [°C] | 60 |
| Minimum operating temperature [°C] | -30 |
| Vacuum resistance | no |
| Reinforcement | polyester braid |
