DIN 11851 end under nut, for welding, stainless steel, type DWS
DIN 11851 end for nut, with a stub for welding, Ra (in the hole) 0.8 µm, for use in the food and chemical industry. Maximum allowable working pressure (for the connection itself according to DIN 11851): 40 bar (DN10÷DN40), 25 bar (DN50÷DN100), 16 bar (DN125÷DN150). Operating temperature: depending on the type of material used for the gasket. Material: stainless steel.
List of product variants
| Article number | Product variant name | Nominal inner diameter | Working pressure [bar] | Enquiry |
|---|---|---|---|---|
| NH-DWS-010 | End. DIN 11851 for welding DN10, 13x10 mm | - | 40 | |
| NH-DWS-015 | End. DIN 11851 for welding DN15, 19x16 mm | - | 40 | |
| NH-DWS-020 | End. DIN 11851 for welding DN20, 23x20 mm | - | 40 | |
| NH-DWS-025 | End. DIN 11851 for welding DN25, 29x26 mm | - | 40 | |
| NH-DWS-032 | End. DIN 11851 for welding DN32, 35x32 mm | - | 40 | |
| NH-DWS-040 | End. DIN 11851 for welding DN40, 41x38 mm | - | 40 | |
| NH-DWS-050 | End. DIN 11851 for welding DN50, 53x50 mm | - | 25 | |
| NH-DWS-065 | End. DIN 11851 for welding DN65, 70x66 mm | - | 25 | |
| NH-DWS-080 | End. DIN 11851 for welding DN80, 85x81 mm | - | 25 | |
| NH-DWS-100 | End. DIN 11851 for welding DN100, 104x100 mm | - | 25 | |
| NH-DWS-125 | End. DIN 11851 for welding DN125, 129x125 mm | - | 16 | |
| NH-DWS-150 | End. DIN 11851 for welding DN150, 154x150 mm | - | 16 |
DIN 11851 end for nut, with a stub for welding, Ra (in the hole) 0.8 µm, for use in the food and chemical industry. Maximum allowable working pressure (for the connection itself according to DIN 11851): 40 bar (DN10÷DN40), 25 bar (DN50÷DN100), 16 bar (DN125÷DN150). Operating temperature: depending on the type of material used for the gasket. Material: stainless steel.
Additional information
| Material | SS – stainless steel |
|---|
Additional information
| Material | SS – stainless steel |
|---|
