Is the BSP/external BSPT female threaded screw, stainless steel, type VT109 compatible with 10 bar systems using AISI 316 and metal-to-metal cone sealing?

Yes. The BSP/external BSPT female threaded screw, stainless steel, type VT109 is compatible with 10 bar systems when made of AISI 316 and using a metal-to-metal cone sealing. The product description states it is specifically designed for piping connections in industrial installations, uses AISI 316 material, employs metal-metal cone sealing, and has a working pressure of 10 bar. Note that actual dimensions may vary slightly by manufacturer, so verify specific dimensional tolerances and thread standards with the supplier to ensure a precise fit in your system.

Can BSP/external BSPT female threaded screw, stainless steel, type VT109 withstand 10 bar with metal-to-metal cone sealing and AISI 316 construction?

Yes. BSP/external BSPT female threaded screw, stainless steel, type VT109, with AISI 316 construction and metal-to-metal cone sealing, is specified for a working pressure of 10 bar. Given the description-internal BSP thread, external BSPT thread, cone (metal-metal) sealing, and AISI 316 material-the fitting is designed to withstand 10 bar. Note that actual performance may vary slightly by manufacturer and tolerance, so confirm manufacturer-specific test data and certifications for critical applications.

Does BSP/external BSPT female threaded screw, stainless steel, type VT109 ensure leak-free metal-to-metal cone sealing at 10 bar?

Yes. BSP/external BSPT female threaded screw, stainless steel, type VT109 is designed to achieve metal-to-metal cone sealing and is rated for a working pressure of 10 bar. The description specifies: internal BSP thread and external BSPT thread for piping connections, metal-metal cone sealing, material AISI 316 stainless steel, and working pressure 10 bar. These specifications indicate the fitting is intended to provide a leak-free metal-to-metal cone seal at that pressure under normal conditions. However, actual leak-tight performance depends on correct installation (proper tightening torque, mating thread condition, alignment), component tolerances, and manufacturing variations (the description notes dimensions may vary slightly by manufacturer). For critical applications or where certification is required, verify manufacturer test data or perform pressure/leak testing after installation.

BSP/external BSPT female threaded screw, stainless steel, type VT109

Additional information

Material	SS – stainless steel

Screw fitting with internal BSP thread and external BSPT thread for use in piping connections of industrial installations. Sealing of the fitting cone (metal-metal). Material: AISI 316 steel. Working pressure: 10 bar. The given dimensions are indicative and may vary slightly depending on the manufacturer.

List of product variants

Article number	Product variant name	Nominal inner diameter	Working pressure [bar]
NM-VT109-04	Fitting with GZ BSPT / GW BSP 1/4", AISI 316	-	10
NM-VT109-06	Fitting with GZ BSPT / GW BSP 3/8", AISI 316	-	10
NM-VT109-08	Fitting with GZ BSPT / GW BSP 1/2", AISI 316	-	10
NM-VT109-12	Fitting with GZ BSPT / GW BSP 3/4", AISI 316	-	10
NM-VT109-16	Fitting with GZ BSPT / GW BSP 1", AISI 316	-	10
NM-VT109-20	Fitting with GZ BSPT / GW BSP 1.1/4", AISI 316	-	10
NM-VT109-24	Fitting with GZ BSPT / GW BSP 1.1/2", AISI 316	-	10
NM-VT109-32	Fitting with GZ BSPT / GW BSP 2", AISI 316	-	10
NM-VT109-40	Fitting with GZ BSPT / GW BSP 2.1/2", AISI 316	-	10
NM-VT109-48	Fitting with GZ BSPT / GW BSP 3", AISI 316	-	10

Screw fitting with internal BSP thread and external BSPT thread for use in piping connections of industrial installations. Sealing of the fitting cone (metal-metal). Material: AISI 316 steel. Working pressure: 10 bar. The given dimensions are indicative and may vary slightly depending on the manufacturer.