Is the Hose end with BSP male thread, brass, MU type suitable for compressed air at 12 bar and temperatures from -20Â°C to +100Â°C?

Yes. The Hose end with BSP male thread, brass, MU type is suitable for compressed air at 12 bar and temperatures from -20Â°C to +100Â°C. The product specification explicitly lists use in industrial installations (e.g., for air), a working pressure up to 12 bar, and an operating temperature range of -20Â°C to +100Â°C, so it meets the stated conditions. Ensure correct installation, compatible hose and fittings, and regular inspection for wear or damage to maintain safe operation.

Can Hose end with BSP male thread, brass, MU type be used in industrial pneumatic systems with 12 bar pressure and -20Â°C to +100Â°C?

Yes. Hose end with BSP male thread, brass, MU type can be used in industrial pneumatic systems at up to 12 bar and in the temperature range â20Â°C to +100Â°C, because its specification matches those operating conditions. Ensure compatibility of the mating fittings, hose material and seals with air and the full temperature range, confirm thread sealing method (tape/compound or parallel/sealing washer), and verify any application-specific standards or safety margins required by your system.

Can Hose end with BSP male thread, brass, MU type withstand continuous 12 bar pressure and -20Â°C to +100Â°C?

Yes. Based on the provided description, the Hose end with BSP male thread, brass, MU type is specified for use in industrial installations (e.g., for air) with a working pressure up to 12 bar and an operating temperature range from -20Â°C to +100Â°C. Therefore it is designed to withstand continuous 12 bar pressure and the stated temperature range. Note: Ensure correct installation, compatible hose and fittings, and compliance with relevant safety standards and periodic inspections for long-term, continuous service.

Hose end with BSP male thread, brass, MU type

All products, Low-pressure fittings and adapters/

Additional information

Material	B – brass (bronze)

Hose end with external BSP thread for use in industrial installations, e.g., for air. Material: brass. Working pressure: up to 12 bar. Operating temperature: from -20°C to +100°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
MU-2852	1/4" BSP GZ hose fitting for 6 mm hose, brass	6	12	In stock	Enquiry
MU-2853	1/4" BSP end fitting for 9 mm hose, brass	10	12	In stock	Enquiry
MU-2857	3/8" BSP GZ hose fitting for 13 mm hose, brass	12	12	In stock	Enquiry
MU-2859	1/2" BSP end fitting for 9 mm hose, brass	10	12	In stock	Enquiry
MU-2860	1/2" BSP end fitting for 13 mm hose, brass	12	12	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Hose end with external BSP thread for use in industrial installations, e.g., for air. Material: brass. Working pressure: up to 12 bar. Operating temperature: from -20°C to +100°C.