Is the Hose end with GZ BSP, brass, QHT rated for both cold and hot water at 16 bar?

Yes. The Hose end with GZ BSP, brass, QHT Format is rated for both cold and hot water at a working pressure of 16 bar. The product description explicitly states it is intended for cold and hot water, is made of brass, and has a working pressure of 16 bar, so it is suitable for use with both temperature ranges at that pressure.

Can the Hose end with GZ BSP, brass, QHT operate safely at 16 bar for both hot and cold water?

Yes. Hose end with GZ BSP, brass, QHT is specified for cold and hot water with a working pressure of 16 bar. Made of brass and intended for both hot and cold water, it is designed to operate safely at that pressure-provided installation follows manufacturer guidelines, fittings and hose are rated to 16 bar, and system temperature limits for the brass/QHT components are not exceeded. Check compatible hose, seals, and local standards; if temperatures or pressures may exceed specs, consult the manufacturer.

Does the Hose end with GZ BSP, brass, QHT meet standards for 16 bar use with both hot and cold water?

Hose end with GZ BSP, brass, QHT Format. based on the provided description. is specified for cold and hot water, made of brass, with a working pressure of 16 bar. That means it is designed and rated to operate at up to 16 bar for both hot and cold water applications. Important practical points: - The stated working pressure (16 bar) is the manufacturerâs rating; use within this limit is required for safe operation. - Temperature limits are not provided in the brief description. "Intended for cold and hot water" implies suitability for typical plumbing temperatures, but you should confirm the maximum service temperature from the manufacturer or datasheet to ensure compatibility with your hot-water system (especially for high temperatures or steam). - Installation factors (thread sealing, hose compatibility, clamps, and any dynamic pressure spikes) and the condition/age of components can affect safety; ensure correct assembly and compliance with relevant local standards/regulations. - For critical applications or where standards/certifications are required, verify certification (e.g., EN, ISO) or request test data from the supplier. Conclusion: Yes. Hose end with GZ BSP, brass, QHT Format is specified for use with hot and cold water at up to 16 bar, but confirm maximum temperature and any required standards/certifications with the manufacturer before critical use.

Hose end with GZ BSP, brass, QHT

All products, Quick couplings for water/

Additional information

Material	B – brass (bronze)
Standard length [m]	15

Hose end with external BSP thread intended for cold and hot water. Material: brass. Working pressure: 16 bar.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
ABB-QHT-10	3/4" BSP end fitting for 3/8" hose, brass	10	16	In stock	Enquiry
ABB-QHT-13	3/4" BSP end fitting for 1/2" hose, brass	12	16	In stock	Enquiry
ABB-QHT-19	3/4" BSP end fitting for 3/4" hose, brass	20	16	In stock	Enquiry