Can the Hydraulic quick coupling without valve, plug with GW BSP, TEMA STANDARD be used with steam and corrosive chemicals at 450 bar?

Hydraulic quick coupling without valve, plug with GW BSP, TEMA STANDARD Format: Based on the provided TEMA STANDARD description, this plug is designed for industrial media including steam and chemicals and is rated for working pressures up to 450 bar (depending on diameter). Material is chromeâplated brass for sizes up to 1" and galvanized steel for sizes above 1", with a safety factor of 4:1. However, suitability for steam and corrosive chemicals at 450 bar cannot be guaranteed from the general description alone. Key considerations: - Temperature: Steam service implies elevated temperatures that can degrade seals and plating; seal material compatibility and maximum operating temperature must be confirmed. - Chemical compatibility: âGases and chemicalsâ is generic . corrosive media may attack chromeâplated brass or galvanized steel; specific chemical compatibility charts are required. - Pressure rating by diameter: âUp to 450 bar (depending on diameter)â means not all sizes may be rated to 450 bar; confirm the exact diameterâs certified working pressure. - Seal type and materials, gasket construction, and any secondary corrosion protection must be verified with manufacturer data sheets or test reports for the intended fluid, temperature and pressure. Conclusion: The product may be usable for steam and some chemicals, but you must confirm (1) the specific size is rated to 450 bar, (2) seal and component materials are compatible with the steam temperature and the specific corrosive chemicals, and (3) the manufacturer approves the intended service. Obtain material/temperature/chemical compatibility and certified pressure ratings from the manufacturer before use.

Is the Hydraulic quick coupling without valve, plug with GW BSP, TEMA STANDARD suitable for steam and corrosive chemicals at high temperatures?

Hydraulic quick coupling without valve, plug with GW BSP, TEMA STANDARD Format: The product description lists steam and chemicals among possible applications, but suitability for steam and corrosive chemicals at high temperatures is conditional. Material: chrome-plated brass up to 1" and galvanized steel above 1" - both have limited corrosion and high-temperature resistance compared with stainless steels or special alloys. No explicit maximum temperature or chemical compatibility data are provided. For high-temperature steam and aggressive chemicals you need verified temperature ratings, material compatibility charts and seals rated for those media. Recommendation: consult manufacturer for maximum operating temperature, compatible seal materials and chemical resistance data; if not available, choose couplings in stainless steel with high-temperature, chemical-resistant seals.

Can the Hydraulic quick coupling without valve, plug with GW BSP, TEMA STANDARD be used with gases and chemicals?

Yes. According to the TEMA STANDARD quick coupling plug (NORDIC RANGE) without valve with internal BSP thread description, the Hydraulic quick coupling without valve, plug with GW BSP, TEMA STANDARD can be used with gases and chemicals. The product is specified for hydraulic power (hydraulic oil) and industrial media including water, steam, fuels and oils, gases and chemicals. Note the following limitations and considerations: material compatibility (chromeâplated brass up to 1", galvanized steel above 1") must be checked against the specific gas or chemical to avoid corrosion or degradation; maximum working pressure varies with diameter (up to 450 bar) and must be suitable for the intended service; safety factor is 4:1; ensure flow and pressure drop characteristics (flow rate given at Îp = 3 bar) meet system requirements; confirm temperature limits and any sealing material compatibility not specified in the brief. For critical or hazardous gases/chemicals, perform a detailed compatibility and safety assessment and consult manufacturer datasheets or technical support before use.

A hydraulic quick coupling without a valve, plug with female thread BSP, TEMA STANDARD

All products, Hydraulic quick couplings/

Additional information

Material	B – brass (bronze)

Quick-coupling plug TEMA STANDARD (NORDIC RANGE) without a valve with a BSP female thread. Intended for heavy-duty operating conditions. Application: power hydraulics (hydraulic oil), industrial (water, steam, fuels and oils, gases and chemicals). Material: chrome-plated brass up to size 1″, galvanized steel above 1″. Working pressure: up to 450 bar (depending on the diameter). Safety factor 4:1. The flow is given at Δp = 3 bar.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TA-H-10020UV	Plug with 1" BSP female, without valve	-	250	In stock	Enquiry
TA-H-15020UV	Plug with 1.1/2" BSP female, without valve	-	200	In stock	Enquiry
TA-H-20020UV	Plug with 2" BSP female, without valve	-	180	In stock	Enquiry
TA-H-2320UV	Plug with 1/8" BSP female, without valve	-	200	In stock	Enquiry
TA-H-2520UV	Plug with 1/4" BSP female, without valve	-	450	In stock	Enquiry
TA-H-3820UV	Plug with 3/8" BSP female, without valve	-	450	In stock	Enquiry
TA-H-5020UV	Plug with 1/2" BSP female, without valve	-	300	In stock	Enquiry
TA-H-7520UV	Plug with 3/4" BSP female, without valve	-	280	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Quick-coupling plug TEMA STANDARD (NORDIC RANGE) without a valve with a BSP female thread. Intended for heavy-duty operating conditions. Application: power hydraulics (hydraulic oil), industrial (water, steam, fuels and oils, gases and chemicals). Material: chrome-plated brass up to size 1″, galvanized steel above 1″. Working pressure: up to 450 bar (depending on the diameter). Safety factor 4:1. The flow is given at Δp = 3 bar.