Marking fonts for P20 and P32 jaws, height 2 mm

, /
Marking fonts for P20 and P32 jaws, height 2 mm

Fonts for marking clamp sleeves for jaws P20 and P32. Standard font height: 2 mm. Available individually: 0 – 9, A – Z, “-” (hyphen), “.” (dot), “/” (slash), “˽” (space).

List of product variants

Article numberProduct variant nameNominal inner diameterWorking pressure [bar]Enquiry
FP-301735-0Font "0" for jaws P20 and P32 (h=2 mm)--
FP-301735-1Font "1" for jaws P20 and P32 (h=2 mm)--
FP-301735-2Font "2" for jaws P20 and P32 (h=2 mm)--
FP-301735-3Font "3" for jaws P20 and P32 (h=2 mm)--
FP-301735-4Font "4" for jaws P20 and P32 (h=2 mm)--
FP-301735-5Font "5" for jaws P20 and P32 (h=2 mm)--
FP-301735-6Font "6" for jaws P20 and P32 (h=2 mm)--
FP-301735-7Font "7" for jaws P20 and P32 (h=2 mm)--
FP-301735-8Font "8" for jaws P20 and P32 (h=2 mm)--
FP-301735-9Font "9" for jaws P20 and P32 (h=2 mm)--
FP-301735-AFont "A" for jaws P20 and P32 (h=2 mm)--
FP-301735-BFont "B" for jaws P20 and P32 (h=2 mm)--
FP-301735-CFont "C" for jaws P20 and P32 (h=2 mm)--
FP-301735-DFont "D" for jaws P20 and P32 (h=2 mm)--
FP-301735-DASHFont "-" for jaws P20 and P32 (h=2 mm)--
FP-301735-DOTFont "." for jaws P20 and P32 (h=2 mm)--
FP-301735-EFont "E" for jaws P20 and P32 (h=2 mm)--
FP-301735-FFont "F" for jaws P20 and P32 (h=2 mm)--
FP-301735-GFont "G" for jaws P20 and P32 (h=2 mm)--
FP-301735-HFont "H" for jaws P20 and P32 (h=2 mm)--
FP-301735-IFont "I" for jaws P20 and P32 (h=2 mm)--
FP-301735-JFont "J" for jaws P20 and P32 (h=2 mm)--
FP-301735-KFont "K" for jaws P20 and P32 (h=2 mm)--
FP-301735-LFont "L" for jaws P20 and P32 (h=2 mm)--
FP-301735-MFont "M" for jaws P20 and P32 (h=2 mm)--
FP-301735-NFont "N" for jaws P20 and P32 (h=2 mm)--
FP-301735-OFont "O" for jaws P20 and P32 (h=2 mm)--
FP-301735-PFont "P" for jaws P20 and P32 (h=2 mm)--
FP-301735-QFont "Q" for jaws P20 and P32 (h=2 mm)--
FP-301735-RFont "R" for jaws P20 and P32 (h=2 mm)--
FP-301735-SFont "S" for jaws P20 and P32 (h=2 mm)--
FP-301735-SLASHFont "/" for jaws P20 and P32 (h=2 mm)--
FP-301735-TFont "T" for jaws P20 and P32 (h=2 mm)--
FP-301735-UFont "U" for jaws P20 and P32 (h=2 mm)--
FP-301735-VFont "V" for jaws P20 and P32 (h=2 mm)--
FP-301735-WFont "W" for jaws P20 and P32 (h=2 mm)--
FP-301735-XFont "X" for jaws P20 and P32 (h=2 mm)--
FP-301735-YFont "Y" for jaws P20 and P32 (h=2 mm)--
FP-301735-ZFont "Z" for jaws P20 and P32 (h=2 mm)--
Marking fonts for P20 and P32 jaws, height 2 mm

Fonts for marking clamp sleeves for jaws P20 and P32. Standard font height: 2 mm. Available individually: 0 – 9, A – Z, “-” (hyphen), “.” (dot), “/” (slash), “˽” (space).

Additional information

Material

CS – steel (cast iron)

Standard length [m]

10, 2

Additional information

Material

CS – steel (cast iron)

Standard length [m]

10, 2

Catalogue
Download

Sales Network
Check

Inquiry
Send

Related Products

If you need help choosing a product or haven’t found the right one?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY