Is the Milk and dairy product milking hose TYGONÂ® S3â¢ M-34-R safe for direct contact with raw milk and compliant with EU, FDA, and 3-A standards?

Yes. Milk and dairy product milking hose TYGONÂ® S3â¢ M-34-R is designed and certified for direct contact with raw milk and dairy products. It is colorless, crystal-clear, flexible, odor- and taste-free, non-toxic, phthalate- and BPA-free, with a smooth non-porous inner surface that prevents fat deposition, product residues, and bacterial growth. It meets hygiene and food contact requirements including EU Regulation 1935/2004 and 10/2011 (for certified conditions/substances), US FDA, 3-A sanitary standards, and Japanese MHLW370(3-D). It is REACH- and California Proposition 65-compliant (contains no hazardous/prohibited substances). Packaged in a clean room; cleaning is by rinsing per specified procedure. Material and performance data: special PVC, max operating temp +74Â°C, brittleness -36Â°C, hardness 66Â° Shore A, density 1.21 g/cmÂ³; full roll 30 m; working pressure set with 1:5 safety factor.

Can Milk and dairy product milking hose TYGONÂ® S3â¢ M-34-R be cleaned and sanitized using standard farm cleaning procedures?

Yes. Milk and dairy product milking hose TYGONÂ® S3â¢ M-34-R can be cleaned and sanitized using standard farm cleaning procedures when following the manufacturerâs specified rinsing/cleaning protocol. Its colorless, crystalâclear, nonâporous PVC inner surface resists fat deposition, product buildup and bacterial growth, and the hose meets hygiene and food contact standards (EU 1935/2004 & 10/2011, FDA, 3âA, Japanese MHLW370(3âD)). It is phthalateâfree and BPAâfree and produced in a Clean Room. Observe the recommended maximum operating temperature (+74Â°C), the special rinsing procedure provided by the supplier, and hygiene practices; avoid returning opened product.

Does the Milk and dairy product milking hose TYGONÂ® S3â¢ M-34-R contain any phthalates or BPA?

No. the Milk and dairy product milking hose TYGONÂ® S3â¢ M-34-R is phthalate-free and BPA (Bisphenol A) free. The hose is described as non-toxic, odor- and taste-free, compliant with hygiene and food-contact regulations (EU 1935/2004 and 10/2011, FDA, 3-A, Japanese MHLW370(3-D)), REACH and California Proposition 65, and does not contain hazardous or prohibited substances.

Milk and dairy product milking hose TYGON® S3™ M-34-R

All products, TYGON® hoses/

Additional information

Material	PVC – polyvinyl chloride
Maximum operating temperature [°C]	74
Vacuum resistance	yes
Standard length [m]	15, 30, 7.5

Colorless, crystal-clear, flexible hose free of odor and taste, non-toxic, phthalate-free, and BPA (Bisphenol A) free. Designed for the transfer of milk and dairy products, used in milking equipment. The smooth, non-porous inner surface of the hose eliminates the problem of fat deposition, product particles, and bacterial growth. The built-in blue tape on the hose wall assures the customer of receiving the original TYGON® S3™ M-34-R hose, specifically designed for transporting raw milk. Meets hygiene and food contact requirements: European 1935/2004/EC and 10/2011 EU (for conditions and substances according to certification), American FDA, 3-A, Japanese MHLW370(3-D). Cleaning by rinsing according to a special procedure. Compliant with REACH and California Proposition 65 – does not contain hazardous and prohibited substances. Full hose roll length: 30 m. Working pressure defined relative to burst pressure with a safety factor of 1:5. Material: PVC (special). Maximum operating temperature: up to +74°C. Brittleness temperature: -36°C. Hardness: 66° Shore (A). Density: 1.21 g/cm³. Note: Product packaged in the Clean Zone of Tubes International (CLEAN ROOM) adhering to strict standards. Return of the product after opening the packaging is not possible.

List of product variants

Article number	Product variant name	Nominal inner diameter	Working pressure [bar]
VE-ACK02035	Hose TYGON S3 M-34-R 11.1x19 mm	10	3.1
VE-ACK02039	Hose TYGON S3 M-34-R 12.7x20.7 mm	12	2.8
VE-ACK02043	Hose TYGON S3 M-34-R 14.3x23.9 mm	14	2.9
VE-ACK02048	Hose TYGON S3 M-34-R 15.9x25.7 mm	16	2.8
VE-ACK02056	Hose TYGON S3 M-34-R 19x29.7 mm	20	2.5
VE-ACK02061	Hose TYGON S3 M-34-R 22.2x34.9 mm	22	2.6
VE-ACK02065	Hose TYGON S3 M-34-R 25.7x38.1 mm	25	2.3

Colorless, crystal-clear, flexible hose free of odor and taste, non-toxic, phthalate-free, and BPA (Bisphenol A) free. Designed for the transfer of milk and dairy products, used in milking equipment. The smooth, non-porous inner surface of the hose eliminates the problem of fat deposition, product particles, and bacterial growth. The built-in blue tape on the hose wall assures the customer of receiving the original TYGON® S3™ M-34-R hose, specifically designed for transporting raw milk. Meets hygiene and food contact requirements: European 1935/2004/EC and 10/2011 EU (for conditions and substances according to certification), American FDA, 3-A, Japanese MHLW370(3-D). Cleaning by rinsing according to a special procedure. Compliant with REACH and California Proposition 65 – does not contain hazardous and prohibited substances. Full hose roll length: 30 m. Working pressure defined relative to burst pressure with a safety factor of 1:5. Material: PVC (special). Maximum operating temperature: up to +74°C. Brittleness temperature: -36°C. Hardness: 66° Shore (A). Density: 1.21 g/cm³. Note: Product packaged in the Clean Zone of Tubes International (CLEAN ROOM) adhering to strict standards. Return of the product after opening the packaging is not possible.