Is the MINI CLIP mini screw clamp, carbon steel suitable for hoses with thin walls and small diameters without causing damage?

Yes. The MINI CLIP mini screw clamp, carbon steel is expressly designed for industrial hoses with relatively small diameters and relatively thin walls. Key features that prevent damage and ensure secure fitting: - Tape tongue between the screw and hose prevents direct screw contact, eliminating pinch points. - Turned (rolled) edges avoid cutting or abrasion against the hose wall. - The clamp conforms tightly and uniformly around the hose, delivering even circumferential pressure rather than localized crushing. - Hex-head screw with notches allows controlled tightening with common tools, helping avoid over-torquing. Material is electrolytically galvanized carbon steel (W1), offering good strength for reliable clamping. Used and tightened properly, the MINI CLIP mini screw clamp, carbon steel provides a strong, uniform grip on thin-walled, small-diameter hoses without causing damage.

Can the MINI CLIP mini screw clamp, carbon steel be reused after removal without losing clamping performance?

Yes. The MINI CLIP mini screw clamp, carbon steel can be reused after removal without significant loss of clamping performance, provided the clamp and screw show no visible damage, corrosion, or deformation. Its electrolytically galvanized carbon steel construction and turned, smooth edges plus the protective tape tongue help preserve hose integrity and the clampâs shape during use and removal. Before reusing, check the band for bends, kinks, or worn notches on the hex head screw; ensure the tape tongue and band seating remain intact to maintain even circumferential pressure and a secure fit. If any damage is present, replace the clamp.

Does the MINI CLIP mini screw clamp, carbon steel include a protective tape tongue to prevent screw contact with the hose?

Yes. The MINI CLIP mini screw clamp, carbon steel includes a protective tape tongue that prevents the screw from contacting the hose, ensures even circumferential pressure, and protects the hose from damage. The turned edges further prevent harm, and the clamp provides a strong, uniform grip.

MINI CLIP mini screw clamp, carbon steel

All products, Clamps for mounting ends/

Additional information

Material	CS – steel (cast iron)

MINI clamp with a single screw designed for industrial hoses with relatively small diameters and relatively thin walls. Equipped with a tape tongue that protects the hose from contact with the screw and ensures even circumferential pressure. The turned edges of the clamp do not cause damage to the hose. The clamp fits perfectly and adheres to the surface of the hose, providing a strong, uniform grip. The hexagonal head screw has notches allowing the use of various types of tools for installation. Material: electrolytically galvanized carbon steel (W1).

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
AB-03010510	MINI CLIP clamp 6 mm, W1	-	-	In stock	Enquiry
AB-03010528	MINI CLIP clamp 8 mm, W1	-	-	In stock	Enquiry
AB-03010536	MINI CLIP clamp 9 mm, W1	-	-	In stock	Enquiry
AB-03010544	MINI CLIP clamp 9.5÷10 mm, W1	-	-	In stock	Enquiry
AB-03010552	MINI CLIP clamp 10÷11 mm, W1	-	-	In stock	Enquiry
AB-03010560	MINI CLIP clamp 12÷13 mm, W1	-	-	In stock	Enquiry
AB-03010579	MINI CLIP clamp 13÷14 mm, W1	-	-	In stock	Enquiry
AB-03010587	MINI CLIP clamp 14÷15 mm, W1	-	-	In stock	Enquiry
AB-03010595	MINI CLIP clamp 15÷17 mm, W1	-	-	In stock	Enquiry
AB-03010608	MINI CLIP clamp 16÷18 mm, W1	-	-	In stock	Enquiry
AB-03010616	MINI CLIP clamp 18÷20 mm, W1	-	-	In stock	Enquiry
AB-03010624	MINI CLIP clamp 19÷21 mm, W1	-	-	In stock	Enquiry
AB-03010632	MINI CLIP clamp 20÷22 mm, W1	-	-	In stock	Enquiry
AB-03010640	MINI CLIP clamp 22÷25 mm, W1	-	-	In stock	Enquiry
AB-03010659	MINI CLIP clamp 23÷26 mm, W1	-	-	In stock	Enquiry
AB-03010667	MINI CLIP clamp 25÷28 mm, W1	-	-	In stock	Enquiry
AB-03010675	MINI CLIP clamp 26÷29 mm, W1	-	-	In stock	Enquiry
AB-03010683	MINI CLIP clamp 29÷32 mm, W1	-	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

MINI clamp with a single screw designed for industrial hoses with relatively small diameters and relatively thin walls. Equipped with a tape tongue that protects the hose from contact with the screw and ensures even circumferential pressure. The turned edges of the clamp do not cause damage to the hose. The clamp fits perfectly and adheres to the surface of the hose, providing a strong, uniform grip. The hexagonal head screw has notches allowing the use of various types of tools for installation. Material: electrolytically galvanized carbon steel (W1).