Does the Nickel-plated brass tee "T" with BSPT GZ, type A16 require thread sealant or washers for leak-free pneumatic connections?

Nickel-plated brass tee "T" with BSPT GZ, type A16 requires additional sealing for leak-free pneumatic connections. If the BSPT threads on your A16 are tapered (as BSPT usually are), use Teflon (PTFE) tape or a suitable pipe thread sealant. If the specific connection uses cylindrical threads instead, seal with an appropriate metal washer (aluminum or copper) between the mating faces. In short: tapered BSPT â thread sealant/tape; cylindrical â aluminum/copper washer.

Is thread sealing required for the Nickel-plated brass tee "T" with BSPT GZ, type A16 when used in pneumatic systems?

Yes. For the Nickel-plated brass tee "T" with BSPT GZ, type A16 used in pneumatic systems, thread sealing is required. The description states that tightness usually requires additional seals: for tapered BSPT threads use PTFE (Teflon) tape or a suitable thread sealant; for cylindrical threads use aluminum or copper sealing washers. Ensure proper sealant compatible with compressed air and the nickel-plated brass material; follow manufacturer's torque recommendations and pressure rating (60 bar).

When using the Nickel-plated brass tee "T" with BSPT GZ, type A16, which thread sealing method is recommended?

For the Nickel-plated brass tee "T" with BSPT GZ, type A16 Format, use thread sealing according to the thread form: because BSPT is a tapered thread, seal the connection with PTFE (Teflon) tape or a suitable pipe thread sealant. Do not use flat washers for BSPT tapered threads.

Nickel-plated brass tee “T” with BSPT male thread, type A16

All products, Threaded pneumatic fittings/

Additional information

Material	B – brass (bronze)

Tee “T” with BSPT male threads, type A16, intended for connecting pneumatic components (including hoses) to one another. A tight connection usually requires additional sealing: PTFE tape or sealant for a tapered thread, or aluminum or copper washers for a parallel thread. Material: nickel-plated brass. Working pressure: 60 bar.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
MW-2116001	Tee screw-in A16, 3 x 1/8" BSPT male	-	60	In stock	Enquiry
MW-2116002	Tee screw-in A16, 3 x 1/4" BSPT male	-	60	In stock	Enquiry
MW-2116003	Tee screw-in A16, 3 x 3/8" BSPT male	-	60	In stock	Enquiry
MW-2116004	Tee screw-in A16, 3 x 1/2" BSPT male	-	60	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Tee “T” with BSPT male threads, type A16, intended for connecting pneumatic components (including hoses) to one another. A tight connection usually requires additional sealing: PTFE tape or sealant for a tapered thread, or aluminum or copper washers for a parallel thread. Material: nickel-plated brass. Working pressure: 60 bar.